REDLINE HT-S1008D 100Mbps Fast Ethernet Switch User Guide

June 3, 2024
REDLINE

REDLINE HT-S1008D 100Mbps Fast Ethernet Switch

REDLINE-HT-S1008D-100Mbps-Fast-PRODUCT

Introduction

our high Performance switch was designed for a network environment where traffic and the number of Users increase continuously, The switch is ideal for shared bandwidth 10Mbps or 100Mbps workgroups with multiple high speed servers, with the highest bandwidth at 200Mbps(100Mbps full duplex mode), each port can provide workstation with congestion free data pipe for simultaneous access to the server, The switch is a perfect choice for 10Mbps network site that could be upgraded to Fast Ethernet in the future, Ethernet workgroups can connect to the switch now, an d change adapters and hubs anytime later without changing the switch or reconfiguring the Network.

Features

Common features

  • Support IEEE802.3X for full duplex mode operation
  • 10Base T , 100Base T, and 100Base FX Operation
  • Support Fl ow control for Full duplex mode operation and backpressure for half duplex mode operation
  • LED Status of Power on, Link and speed
  • Full line speed capability of 148800(14880) packets/sec for 100M(10m)
  • Automatic MDI/MDI X Configuration
  • Communication distance: Not less than 100M
  • Interface: 5 RJ45 Port s
MAC Address and Bandwidth

Product models| ports| Mac Address| Bandwidth| Switching

Capacity

---|---|---|---|---
5/8ports 10/100Mbps

Ethernet    switch

| 5/8| 2K| 1G| 1.6Gbps

Contents

  1. 5 port s 10/100M Switch External power adapter 5VDC/1A ,User

LED Indicator

LED Indicator

Indicator Color Status Description
Power Blue on Switch Power on
off Switch Power off
Link/Act/100Mbps Blue On Any Network device

connected                                    to the corresponding port

Flash| Data   transmitting between the switch and network device

Physical and Environment

Standards| IEEE 802.3 10BASE-T Ethernet

IEEE802.3u 100BASE-TX Fast Ethernet ANSI/IEEE 802.3 Nway Auto-Negotiation IEEE 802.3x Flow control

---|---
Protocol| CSMA/CD
Data transfer Rate| Ethernet: 10Mbps(Half duplex), 20Mbps(Full Duplex),

Fast                  Ethernet:                         100Mbps(Half

duplex),200Mbps(Full Duplex)

Network cables| 10BASE-T:2-Pair UTP Cat.3,4,5; EIA/TIA-568 100

Ohm STP

100BASE-TX: 2-Pair UTP Cat.5; EIA/TIA-568 100

Ohm STP

100     BASE-FX:62.5/125    Micron           multimode Fiberoptic

Power supply| EXTERNAL 5V/1A DC Power adapter
Temperature &Humidity| Operation: 0~60 , Storage: -10~70

Humidity: 10%~90%, Storage: 5%~90%

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals