BUTTONS EASEBTN30 Ease Wireless Bluetooth Earphones User Guide

BUTTONS EASEBTN30 Ease Wireless Bluetooth Earphones

Powering the Device Up & Off

• Press and hold the center button for 3 seconds to power up or power off device
• LED flashes white color for power-up. Users will hear “Buttons on
• LED flashes red color for power off, together with “Your Buttons are powering off”

Note: Please charge your device before first use.

Pairing

• When the device is off, press and hold the center button until entering pairing mode

• LED flashes red and white color, together with the “Ready for pairing” voice prompt, which means the device has entered pairing mode. The device will enter pairing mode on first-time power up

• Turn on your mobile’s Bluetooth, find “BUTTONS Ease” in the Bluetooth device list and click “Connect”

• LED flashes white color slowly, together with the “Connected” voice prompt, this means the earphone has connected successfully.

Note: After the first-time connection has been successful, the earphone will auto-connect to the mobile phone in the future when the connection is available.

Music controls

• Single press “+”
• Double press “+”
• Single press center button
• Single press “-”
• Double press “-”

Note: There will be a ‘beep’ sound when the volume reaches its maximum or minimum.

Phone call controls

• Single press “+”
• Single press center button
• Double press center button
• Single press center button during a phone call
• Single press “-”

Voice Assistant

• Single press “Voice Trigger” button to wake up voice assistant.

Charging

• Low Battery
• LED blinks red
• Charging
• LED slow breath white color
• Fully Charged
• LED is solid white

Note: Please use standard 5V1A charging adapter to charge the device. Out of specification adapter will cause device damage.

Music Sharing

• When there are two Buttons earphones close to each other, the two earphones can be setup to share music.
• Press voice trigger button and “+” button at the same time to enter music sharing function
• Press voice trigger button and “-” button at the same time to exit music sharing function
• Voice trigger button

Power Saving Mode

• When the earphone is not in use for a period, the earphone can enter power saving mode.
• Attach the two sides of the earbuds together
• Separate the two sides of the earbuds

Note:
The Bluetooth connection will be broken during power saving mode and will reconnect once earphones are separated. User should manually power off the device if they do not intend to use for a longer period.

Safety Guide

Warning: Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed together with normal household waste. They must be collected and disposed separately to protect the environment.
Your BUTTONS retailer will advise you of the correct method of disposal in your country/region.

Warning : Prolonged listening at high volume levels can cause hearing damage.

Warning: Choking Hazard – small parts.

Do not expose your device to extreme temperatures lower than -10℃ and higher than +45℃. The product shall only be connected to a USB interface of version USB2.0.

• Manufacturer: Buttons (Shanghai) Technology Limited Name: BUTTONS Ease

• Model: EASEXXXXX

• Charging voltage/current: 5V/1A

• Do not use your earphones during charging

• Items in package:

• Silicon eartips x3

• USB Type A to Type C charging cable x1

• BUTTONS Ease earphone x1

• Quick Start Guide x1

• Warranty Card x1

• Frequency: 20 ~ 20KHz

• Resistance : 32 Ohm

• Sensitivity: 110dB±3dB

• S peakers: 11mm composite neodymium unit Call Mic: Analog Mic, -38dB±1dB

• MIC SNR : 63dB

• Battery life: up to 10h (medium sound volume) Earphone Battery: 45mAh*2

• Bluetooth version : v5.0

• Bluetooth range : Over 15 meters

• Weight: About 24g

• Warranty period: 1 year

Warning: This product contains magnets
EU WARNING: Hereby Buttons declares that the radio equipment type [xxxxxxxx] is in compliance with Directive 2014/53/EU. This device may be operated in all member states of the EU. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>