Pioneer DJ Gruolin GL-L03 RGB Fullcolor Beam Effect Light User Manual
- May 15, 2024
- Pioneer DJ
Table of Contents
Pioneer DJ Gruolin GL-L03 RGB Fullcolor Beam Effect Light
Thank you very much for purchasing the RGB Fullcolor Beam Effect Light. For your personal safety and better use of this product, please read this manual carefully before use and follow the instructions to avoid personal injury and damage the light.
Technical Parameters
- Power supply: AC100~240V, 50Hz/60Hz
- Scanning system: Galvo scanning system 15kpps/‡25°
- Luminous colour: RGB
- Wavelength: R 660nm G 532m B 450nm
- Power Connection: Power Cord
- Signal connection: Signal input line/output line
- Control channels: 6 / 34 DMX-512 signal channels
- Control mode: DMX-512 signal control, voice control, self-propelled and master-slave mode
- Cooling system: Pure aluminium chassis cooling system
- Working environment: Indoor
Rear Panel Function Introduction
- Menu function description:
- MENU: Menu function key
- ENTER: Menu function confirmation key
- UP / DOWN: Menu word function page up and down selection key
- DMX IN: DMX512 signal input
- DMX OUT: DM512 signal output
Packing List:
- RGB Fullcolor Beam Effect Light
Operation Interface Instruction
- A.001 – – – 34CH Professional Line & Animation Pattern DMX Mode (Address Code: A.001 – A.512)
- E.001 – – – 6CH Simple Line & Animation Pattern DMX Mode (Address Code: E.001 E.512)
- Aut.1 – Aut.3 – – – Aut. 1 is Line automatic playback mode, Aut.2 is Animation automatic playback mode, Aut. 3 is Line & Animation automatic playback mode.
- Sod.1-Sod.3 – – – Sod. 1 is Line sound control mode, Sod.2 is Animation sound control mode, and Sod.3 is Line & Animation sound control mode.
- ATTENTION: Master-Slave Mode, The Slave Fixtures Need To Be Set Up To E.001
DMX512 Control Mode (6CH / 34CH):
6CH Simple Line & Animation Pattern DMX Mode (address code: E.001)
CH1
| ****
Total Switch
| 0: Light off
1-255: Light on
---|---|---
CH2
| ****
Auto & Sound Control Mode
| 1-31: Auto Mode Switch
32-63: 18 Animation patterns auto mode
64-127: Line & animation pattern auto mode
128-159: Sound Control Switch
160-191: Animation pattern sound mode
192-255: Line & animation pattern sound mode
CH3
| ****
Animation & Line Gallery Selection
| 0-239: Animation Gallery Switch (Use CH4 to choose the animation pattern)
240-255: Line Gallery Switch (Use CH4 to
choose the line effect)
CH4
| Animation pattern
& Line effect Selection
| 0-255: Animation pattern selection (when CH3 value is in 0-239) , or Line effect selection (when
CH3 value is in 240-255)
CHS
| ****
Colour Selection
| 0-31: Colorful color change 32-63 Red
64-95: Green
96-127: Yellow
128-159: Blue
160-191: Pink
192-223: Indigo
224-255: White
CH6
| ****
Speed Adjustment
| 0: Primary speed
1-255: Speed adjustment, from slow to fast
34CH Professional Line & Animation Pattern DMX Mode (address code: A.001)
CH1
| ****
Total Switch
| 0: Light off
1-99: Auto run
100-199: Sound control
200-254: Reserve 255:Light off
---|---|---
CH2
| Out of Bounds Mode and Pattern Size| 0-249: Pattern size adjustment and Out of bounds mode
250-255: Reserve
CH3
| ****
Animation & Line Gallery Selection
| 0-239: Animation Gallery Switch (Use CH4 to choose the animation pattern)
240-255: Line Gallery Switch (Use CH4 to
choose the line effect)
CH4
| Animation Pattern & Line Effect
Selection
| 0-255: Animation pattern selection (when CH3
value is in 0-239) , or Line effect selection (when CH3 value is in 240-255)
---|---|---
CH5
| ****
Pattern Scaling
| 0-127: Static pattern size
128-159: Dynamic zoom in 160-191: Dynamic zoom out
192-223: Dynamic scaling 224-255: Dynamic flip scaling
CH6
| ****
Pattern Rotation
| 0-127: Static rotation
128-159: Dynamic 2 times forward and reverse rotation
160-191: Dynamic 1 time forward and reverse
rotation
192-223: Dynamic forward rotation 224-255: Dynamic reverse rotation
CH?
| ****
Horizontal Movement
| 0-127: Static translation
128-159: Dynamic push-up waves
160-191: Dynamic push-down waves
192-223: Dynamic left shift
224-255: Dynamic right shift
CHS
| ****
Vertical Movement
| 0-127: Static vertical shift
128-159: Dynamic right push waves
160-191: Dynamic left push waves
192-223: Dynamic move down
224-255: Dynamic move up
CH9
| ****
Horizontal Zoom
| 0-127: Static size
128-159: Dynamic push up distortion 160-191: Dynamic push down distortion
192-223: Dynamic scaling 224-255: Dynamic flip scaling
CH10
| ****
Vertical Zoom
| 0-127: Static size
128-159: Dynamic right push distortion 160-191: Dynamic left push distortion
192-223: Dynamic scaling 224-255: Dynamic flip scaling
CH11
| ****
Force Tinting
| 0: Primary colour
1-255: Change a color at every point
CH12
| ****
Color Change
| 0-7: Primary colour, 8-15: Red, 16-23: Yellow, 24-31:
Green, 32-39: Indigo, 40-47: Blue, 48-55: Pink,
56-63: White
---|---|---
64-95: Red, green and blue colour change of the whole picture
96-127: Yellow, indigo and pink colour change of the whole picture
128-159: Colorful color change of the whole picture 160-191: Colorful color change
192-223: Revolving horses color
224-255: Reverse revolving horses color
CH13
| ****
Node Highlighting
| 0-63: Node is getting brighter and brighter 64-127: Display broken pen
128-159: Display retrace string
224-255: Reserve
CH14
| ****
Node Expansion
| 0-255: Expansion points (when CH15<=127)
0-255: Delay after full expansion (when CH15>=128)
CH15
| ****
Gradient
| 0-63: Forward manual expansion (Must be used with CH14 , the expansion amount is determined
by CH14)
64-127: Reverse manual expansion (Must be
used with CH14 , the expansion amount is determined by CH14)
128-159: Dynamic gradient effect A 160-191: Dynamic gradient effect B 192-223: Dynamic fade effect C
224-255: Dynamic fade effect D
CH16
| ****
Degree of Distortion
| 0-255: Adjust the degree of distortion of various
distortion effects (Applicable for CH7, CH8, CH9, CH10)
CH17
| ****
Filter Selection
| 0-19 Filter 1, 20-39 Filter 2, 40-59: Filter 3, .
240-255: Filter 13
CH18
| ****
The Second Pattern Switch
| 0: Light off
1-99: Autorun
100-199: Sound control
200-254: Reserve
255 Light off
Note: When CH3 choose the animation gallery (0-239), the second pattern is the animation pattern.
When CH3 choose the line gallery (240-255), the second pattern is the line pattern.
CH21 Choose the second pattern (CH18-CH34 functions are just available for the second pattern)
CH19
| Out of Bounds Mode and Pattern
Size
| 0-249: Pattern size adjustment and Out of bounds mode
250-255: Reserve
---|---|---
CH20| No Function| Reserve
CH21| The Second
Pattern Selection
| Choose the second pattern
CH22
| ****
Pattern Scaling
| 0-127: Static pattern size
128-159: Dynamic zoom in
160-191: Dynamic zoom out
192-223: Dynamic scaling
224-255: Dynamic flip scaling
CH23
| ****
Pattern Rotation
| 0-127: Static rotation
128-159: Dynamic 2 times forward and reverse rotation
160-191: Dynamic 1 time forward and reverse
rotation
192-223: Dynamic forward rotation
224-255: Dynamic reverse rotation
CH24
| ****
Horizontal Movement
| 0-127: Static translation
128-159: Dynamic push-up waves 160-191: Dynamic push-down waves
192-223: Dynamic left shift 224-255: Dynamic right shift
CH25
| ****
Vertical Movement
| 0-127: Static vertical shift
128-159: Dynamic right push waves 160-191: Dynamic left push waves
192-223: Dynamic move down 224-255: Dynamic move up
CH26
| ****
Horizontal Zoom
| 0-127: Static size
128-159: Dynamic push-up distortion 160-191: Dynamic push-down distortion
192-223: Dynamic scaling 224-255: Dynamic flip scaling
CH27
| ****
Vertical Zoom
| 0-127: Static size
128-159: Dynamic right push distortion 160-191: Dynamic left push distortion
192-223: Dynamic scaling 224-255: Dynamic flip scaling
CH28
| ****
Force Tinting
| 0: Primary colour
1-255: Change a color every point
CH29
| ****
Colour Change
| 0-7: Primary color, 8-15: Red, 16-23: Yellow, 24-31:
Green, 32-39: Indigo, 40-47: Blue, 48-55: Pink,
56-63: White
---|---|---
64-95: Red, green and blue colour change of the whole picture
96-127: Yellow, indigo and pink colour change of the whole picture
128-159: Colorful color change of the whole picture 160-191: Colorful color change
192-223: Revolving horses color
224-255: Reverse revolving horses colour
CH30
| ****
Node highlighting
| 0-63: Node is getting brighter and brighter 64-127: Display broken pen
128-159: Display retrace string
224-255: Reserve
CH31
| ****
Node expansion
| 0-255: Expansion points (when CH15<=127)
0-255: Delay after full expansion (when CH15>=128)
CH32
| ****
Gradient
| 0-63: Forward manual expansion (Must be used with CH31 , the expansion amount is determined
by CH31)
64-127: Reverse manual expansion (Must be used with CH31, the expansion amount is
determined by CH31)
128-159: Dynamic gradient effect A 160-191: Dynamic gradient effect B 192-223: Dynamic fade effect C
224-255: Dynamic fade effect D
CH33
| ****
Degree of Distortion
| 0-255: Adjust the degree of distortion of various distortion effects (Applicable for CH24, CH25, CH26, CH27)
CH34
| ****
Filter Selection
| 0-19: Pattern size
20-255: Reserve
- IR Remote Control Instruction:
Note: Before using the remote control, please pull out the plastic sheet under
the remote control so that the remote can work.
Maintenance
- Try to prevent the artificial laying of dust, dirt and smoke oil or even flow into the lamp body, and keep the light show as clean as possible.
- Please use professional glass cleaners regularly every month and clean the lens with flannel to ensure the maximum brightness output of the light and extend the life of the light source.
Caution:
- Please do not keep your eyes on the light for a long time, so as not to damage your eyes.
- Keep away from children.
- Avoid the use of optical aids such as binoculars or telescopes inside the beam.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>