REDLINE Parlux Triple Tailgate Light Bar Installation Guide
- May 15, 2024
- REDLINE
Table of Contents
TRIPLE TAILGATE LIGHT BAR (2PC INSTALLATION GUIDE
)
WHAT’S INCLUDED
INSTALLATION
STEP1
Test the Redline LED Bar for functionality before mounting on vehicle.
STEP2
Remove the tailgate from vehicle to prep the area. 
STEP3
Thoroughly clean the area where the Redline LED Bar will be mounted.
OPTION 1
STEP4
Apply the Adhesive Promoter to the cleaned area. 
STEP5
- Take the plastic aligner and fix it between the two LED bar.
- Peel the back off of adhesive on each end of the LED bar.
- When this is all done, hold the LED bar with both hands and apply firmly to the cleaned area. Remove the plastic aligner.
OPTION 2
STEP4
For optimal installation of the Redline LED Bar, carefully plan and mark the
desired bracket mounting locations, taking placement into consideration to
ensure a straight application. 
STEP5
Securely mount the Redline LED Bar to your vehicle using the provided screws
and clips to ensure a solid installation. 
STEP6
Plug the 4-pin flat connector into the proper receptacle on the vehicle.
STEP7
WHERE TO CONNECT THE REVERSE SIGNAL ?
Splice the white wire coming from the Redline LED Bar to the factory tail
light and use the SCOTCH-LOK wiring connector we provided.
STEP8
Test the Redline LED Bar again for function.
OptioNal
HOW TO CONNECT TO YOUR VEHICLE ?
The diagrams are the recommend installation methood for the Redline Triple
Tailgate Light Bar. Please confirm the year model and make of your vehicle
before installing.
Feel free to contact us using the link below for product inquiries or
installation support. OPT7 Support Team: https://www.opt-7.com/customer-
support/
Notice: Redline Adapter Connectors are sold separately. Please refer to
the following links https://www.opt-7.com/truck/tailgate-light-bars
2015~2020 F150 (16PIN)
ALL MODELS
WITH BLIS/BACKUP CAMERA/ASSIST SENSOR
2018~2020 F150 (6PIN)
XL, XLT, LARIAT
NO BLIS/BACKUP CAMERA/ASSIST SENSOR 2015~2018 F150 (3PIN)
XL, XLT, LARIAT
NO BLIS/BACKUP CAMERA/ASSIST SENSOR 2019+ Silverado/Sierra 1500 (6PIN)
ALL MODELS
Dual 7-Pin Splitter to 4 Foot 4-Pin OPT7
Redline 4.9ft Hardwire Harness
For Tailgate Light Bars
(7 Wiring Connectors Included)
HARD WIRING
If hard-wiring, use image below to identify wire color functions and pair them to appropriately identified wires on vehicle.
DISCLAIMER
OPT7 Lighting is not liable for damages, injuries, or death while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
2 YEAR WARRANTY
Documents / Resources
|
REDLINE Parlux Triple Tailgate Light
Bar
[pdf] Installation Guide
Parlux Triple Tailgate Light Bar, Parlux, Triple Tailgate Light Bar, Tailgate
Light Bar, Light Bar, Bar
---|---