CORSLESS 9118001 PISTOL GRIP SOLDERNING GUN KIT Installation Guide

CORSLESS 9118001 PISTOL GRIP SOLDERNING GUN KIT Installation Guide

HOW TO USE SOLDERING IRON KIT?

Step 1 Totate the nut and straighten the tin wire. (Fig.01)

Step 2 Insatall the cilp and tin wire. (Fig.02)

Step 3 Pass the tin wire in a straight line to the tip of the soldering iron. (Fig.03)

Step 4 Pull the trigger for tin-out. (Fig.04)

IDENTIFICATION KEY

A Power Switch

B Charging Interface

HOW TO SOLVE A POSSIBLE ISSUE THAT THE GUN DOESN’T FEED?

Please note it may happen that if the wire is not straight inside the solder, simply it does not find the way to exit, but is bundled inside.
You may try to open the cover of the gun at side and see where the wire is. At that point you may cut the soldering wire and restart to feed it. If this way could not solve the issue, please ask for replacement.

HOW TO USE DESOLDERING PUMP?

Step 1 Press the plunger down until a clicked sound. (Fig.05)

Step 2 Heating the solder unilt it melts and place the sucker next to it. (Fig.06)

Step 3 Press the release button to remove the melt solder. (Fig.07)

Step 4 Repeat it if you need. (Fig.08)

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>