REDLINE PARLUX 2014-2021 Tundra Triple Tailgate Light Bar Installation Guide
- June 1, 2024
- REDLINE PARLUX
Table of Contents
REDLINE PARLUX 2014-2021 Tundra Triple Tailgate Light Bar
Product Information
Specifications:
- Brand: Redline Parlux
- Model: Triple Tailgate Light Bar (2PC) for 2014~2021 Tundra Gen 2
- Includes: Triple Redline LED Bar, Plastic Aligner, EVA foam, Adhesive Booster, Scotch-Lok Wiring Connectors, Mounting Clips
Product Usage Instructions
Installation:
Step 1 – Bench Test:
Before mounting, connect the Redline Light Bar to the vehicle to ensure all
lighting functions work.
Step 2 – Prep Area:
Remove the tailgate, clean the area with a washcloth, and apply Adhesive
Promoter to the mounting area.
Step 3 – Positioning:
Position the Redline Light Bar with the center hatch as a reference point.
Ensure OPT7 logos are oriented correctly for alignment.
Step 4 – Alignment:
Use EVA and Plastic Aligner for parallel alignment of LED bars. Insert EVA
into the middle gap hitch for temporary alignment.
Step 5 – Mounting:
Connect Plastic Aligner to level the light bar for both sides of the
vehicle. Remove adhesive backing and ensure bars are mounted at the same
level.
Step 6 – Connection:
Choose between Option 1 (plug 4-pin connector into receptacle) or Option 2
(use OPT7 Easy Connect USCAR 7 Pin to 4 Pin Harness).
Step 7 – Reverse Signal Connection:
If not using harness, tap into OEM reverse wire using Scotch-Lok
connectors. Alternatively, use OPT7 Easy Connect USCAR 7 Pin to 4 Pin Harness
for a cleaner installation.
Step 8 – Functionality Test:
Re-test all functions of the Redline Parlux LED Light Bar to ensure proper
operation.
Frequently Asked Questions (FAQ):
- Q: Can I purchase the OPT7 Easy Connect USCAR 7 Pin to 4 Pin Harness separately?
A: Yes, the harness is sold separately on www.opt-7.com. It allows for a neater installation while retaining trailer plug functionality.
WHAT’S INCLUDED
INSTALLATION
STEP1
Before mounting the Redline Light Bar, perform a bench test by connecting the
Redline LED Light Bar to the vehicle. Ensure all the lighting functions work.
RECOMMENDATION: For a successful install, we encourage you to carefully
remove the truck’s tailgate from the vehicle to achieve the best results.
STEP2
Once you have remove the tailgate, prep the area by taking a wash cloth to
remove any dirt and debris from the area. Next, using the Adhesive Promoter
apply in the area you will be mounting the light bar.
STEP3
Position the Redline Light Bar according to your preference, with the center
hatch as a reference point for measurement. For accurate sequential alignment
of the light bar, ensure that the OPT7 logos on each end of the vehicle are
oriented correctly.
STEP4
OPTION 1
Utilize the EVA and Plastic Aligner to achieve a parallel and horizontal
alignment of the LED bars. The EVA will need to be temporary inserted into the
middle gap hitch.
STEP5
- Take the Plastic Aligner and connect to the LED bar to level the light bar for the left side of the vehicle.
- Next, repeat this step for the right side of the vehicle.
- Gently remove the adhesive backing from each LED light bar.
- Ensure both LED light bars are mounted at the same level.
STEP4
OPTION 2
For optimal installation of the Redline LED Bar, carefully plan and mark the
desired bracket mounting locations, taking placement into consideration to
ensure a straight application.
STEP5
Securely mount the Redline LED Bar to your vehicle using the provided screws
and clips to ensure a solid installation.
STEP6
OPTION 1: You may plug the 4-pin flat connector into the proper receptacle
on the vehicle.
OPTION 2: For a neater installation while retaining the ability to use
your trailer plug, consider utiliing the OPT7 Easy Connect USCAR 7 Pin to 4
Pin Harness with Reverse Wire available on our website.
OPT7 Easy Connect USCAR 7 Pin to 4 Pin Harness with Reverse Wire
*Sold separately. Please visit www.opt-7.com for purchasing options.
STEP7 WHERE TO CONNECT THE REVERSE SIGNAL?
If you are not using the OPT7 Easy Connect USCAR 7 Pin to 4 Pin Harness with
Reverse Wire, here is another option to connect the Redline Light Bar Reverse
Function. Remove the OEM tail lights to locate the OEM reverse wire, using the
provided scotch-looks, tap into the connector.
STEP8
Re-test the functionality of the Redline Parlux Tacoma LED Light Bar. Ensure
all the functions are working.
Optional
OPT7 Easy Connect USCAR 7 Pin to 4 Pin Harness with Reverse Wire
HARDWIRING
If hard-wiring, use image below to identify wire color functions and pair
them to appropriately identified wires on vehicle.
DISCLAIMER
OPT7 Lighting is not liable for damages, injuries, or death while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation. If
you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
YEAR 2 WARRANTY
Documents / Resources
|
REDLINE PARLUX 2014-2021 Tundra Triple Tailgate Light
Bar
[pdf] Installation Guide
2014-2021 Tundra Triple Tailgate Light Bar, Tundra Triple Tailgate Light Bar,
Triple Tailgate Light Bar, Tailgate Light Bar, Light Bar
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>