REDLINE PARLUX 2005-2023 Tacoma Triple Tailgate Light Bar Installation Guide

TRIPLE TAILGATE LIGHT BAR 2PC
FOR 2005~2023 TACOMA GEN 2/3
INSTALLATION GUIDE

WHAT’S INCLUDED

INSTALLATION

STEP 1
Before mounting the Redline Light Bar, perform a bench test by connecting the Redline LED Light Bar to the vehicle. Ensure all the lighting functions work.
*RECOMMENDATION: For a successful install, we encourage you to carefully remove the truck’s tailgate from the vehicle to achieve the best results. STEP 2
Once you have remove the tailgate, prep the area by taking a wash cloth to remove any dirt and debris from the area. Next, using the Adhesive Promoter apply in the area you will be mounting the light bar. STEP 3
Position the Redline Light Bar according to your preference, with the center hatch as a reference point for measurement. For accurate sequential alignment of the light bar, ensure that the OPT7 logos on each end of the vehicle are oriented correctly. STEP 4
Utilize the EVA and Plastic Aligner to achieve a parallel and horizontal alignment of the LED bars. The EVA will need to be temporary inserted into the middle gap hitch.
OPTION 1

STEP 5

1. Take the Plastic Aligner and connect to the LED bar to level the light bar for the left side of the vehicle.
2. Next, repeat this step for the right side of the vehicle.
3. Gently remove the adhesive backing from each LED light bar.
4. Ensure both LED light bars are mounted at the same level.

STEP 4
For optimal installation of the Redline LED Bar, carefully plan and mark the desired bracket mounting locations, taking placement into consideration to ensure a straight application.
OPTION 2 STEP 5
Securely mount the Redline LED Bar to your vehicle using the provided screws and clips to ensure a solid installation.

STEP 6
OPTION 1: You may plug the 4-pin flat connector into the proper receptacle on the vehicle.
OPTION 2: For a neater installation while retaining the ability to use your trailer plug, consider utiliing the OPT7 Redline Dual 7-Pin Splitter to 4 Foot 4-Pin Extension Adapter Harness available on our website.

Dual 7-Pin Splitter to 4 Foot 4-Pin
Please note that this item is not included and needs to be purchased separately. STEP 7 WHERE TO CONNECT THE REVERSE SIGNAL ?
Splice the white wire from the Redline Light Bar into the reverse factory tail lights using the provied Scotch-lok wiring connector. Refer to your owner’s manual to identify the appropriate color to tap into for the OEM reverse wire. STEP 8
Re-test the functionality of the Redline Parlux Tacoma LED Light Bar. Ensure all the functions are working.

OPTINAL

Dual 7-Pin Splitter to 4 Foot 4-Pin

HARD WIRING

If hard-wiring, use image below to identify wire color functions and pair them to appropriately identified wires on vehicle.

DISCLAIMER

OPT7 Lighting is not liable for damages, injuries, or death while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket

2 YEAR WARRANTY

OPT7

Documents / Resources

| REDLINE PARLUX 2005-2023 Tacoma Triple Tailgate Light Bar [pdf] Installation Guide
2005-2023 Tacoma Triple Tailgate Light Bar, 2005-2023 Tacoma, Triple Tailgate Light Bar, Tailgate Light Bar, Light Bar, Bar
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>