LOWE S INS14337 LED Light Instruction Manual
- June 3, 2024
- Lowe s
Table of Contents
LOWE S INS14337 LED Light
WARNING
Improper wiring of any electrical device can cause serious injury or death.
These wiring devices should only be installed by a certified electrician or
another qualified person.
CAUTION
This product should be installed in accordance with the National Electrical
Code and all applicable local codes and standards.
Installation Instructions
TURN OFF THE POWER BEFORE INSTALLING
INSTALLATION
- Thread LED light head into weatherproof cover.
- Connect the LED light wires to the supply line using wire nuts (not included) per the wiring diagram below.
- Mount the LED and tighten the locknut to secure in place.
- Adjust the lamp position using the instructions on the right and seal threads with a silicone sealing compound (not included).
- Seal all openings to comply with wet location installation.
ADJUSTING LAMP POSITION
- Loosen the knob on the lamp.
- Adjust the lamp to the desired position using vertical movements.
- Tighten the knob to lock position.
- For horizontal motion, loosen the locknut, rotate it to the desired position, and tighten the locknut to the lock position.
Note – Modifications to the product void certifications and are not recommended as they may impact performance.
This long-lasting LED requires no maintenance or bulb changes for the life of the lamp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>