Lowe s 66429008 Crystal Chandelier Instruction Manual
- May 15, 2024
- Lowe s
Table of Contents
Lowe s 66429008 Crystal Chandelier
Product Information
Specifications:
- Fixture Type: Crystal Chandelier
- Bulb Base: E12
- Maximum Bulb Wattage: 40W
- Compatible Bulb Types: Incandescent, LED, CFL, Halogen, Color Changing
- Dimmable: Yes (with dimmable bulbs and compatible dimmer switch, not included)
Product Usage Instructions
Installation Preparation:
Before starting the installation process, gather the following tools:
- Ladder
- Pliers
- Wire Strippers
- Screwdrivers
- Power Drill (optional)
- Drill Bit (optional)
Mounting & Wiring:
Follow these steps to mount and wire the crystal chandelier:
- Turn off power at the circuit box to avoid electric shock.
- Place the mounting bracket on the ceiling and mark the drilling points.
- Drill holes in the ceiling and insert plastic anchors.
- Attach the mounting bracket to the anchors using wood screws.
- Connect fixture wires to house wires using wire connectors (black/brown to live wire, white/blue to neutral wire, yellow & green to ground wire).
- Attach the canopy to the mounting bracket with machine screws and bolt caps provided.
Frequently Asked Questions (FAQ)
Q: What type of bulbs does the crystal chandelier use?
A: The fixture uses E12 bulb base and works with incandescent,LED, CFL,
halogen, or color-changing bulbs up to 40W. Bulbs are not included, so you
need to purchase the appropriate bulbs separately.
Q: Is the crystal chandelier dimmable?
A: Yes, the chandelier is fully dimmable when used with dimmable bulbs
and a compatible dimmer switch (not included).
Q: What safety precautions should I take during installation?
A: Make sure to disconnect power by turning off the circuit breaker or
removing the fuse. Do not rely on the light switch to prevent electrical
shock. If you are unsure about electrical connections, it is recommended to
seek the assistance of a qualified electrician.
Please contact us in following format:
- Order platform name and Order ID NO.
- Problem details with picture/video if possible
Email: homechandelier@qq.com
Safety Rules
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
NOTE: The important safeguards and instructions appearing in this manual
are not meant to cover all possible conditions or situations that may occur.
It must be understood that common sense, caution, and care, are factors which
cannot be built into any product. These factors must be supplied by the
person(s) installing this unit.
READ & SAVE THESE INSTRUCTIONS
CAUTION: Before assembling the lighting fixture, refer to the section titled Wiring Connections. If you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician.
UNPACK THE PACKAGE
Check the contents to be sure everything is included
Tools Needed: Slotted screwdriver, Adjustable wrench, Step ladder, Wire
cutters, wiring supplies as required by electrical code.
INSTALLATION & OPERATION INSTRUCTIONS GENERAL
Before starting the installation, disconnect the power by turning off the
circuit breaker or by removing the appropriate fuse at the fuse box. Turning
the power off using the light switch is not sufficient to prevent electrical
shock. All electrical connections must be in accordance with local and
National Electrical Code (NEC) standards. If you are unfamiliar with proper
electrical wiring connections, obtain the services of a qualified electrician.
Remove the fixture and the mounting packages from the box and make sure that
no parts are missing by referencing the illustrations on the installation
instructions.
Be sure to read these installation instructions and review the diagrams
thoroughly before installation.
LIGHT BULBS REQUIRED
This fixture uses E12 bulb base, works with incandescent, LED, CFL, halogen or
color changing bulbs up to 40W. Fully dimmable when used with dimmable bulbs
and a compatible dimmer switch (not included).
BULBS ARE NOT INCLUDED IN THIS ITEM. Please purchase the right bulbs you need.
Installation Preparation
Tools You Need
If mounting to a support structure, you will also need the optional tools.
Mounting & Wiring
- Plastic Anchor ①
- Wire Connector ②
- Fixture Wire ③
- Mounting Bracket ④
- Machine Screw ⑤
- Wood Screw ⑥
- Canopy ⑦
- Bolt Cap ⑧
NOTE: Please test the fixture before installation to ensure it is working properly.
- Turn off power at circuit box to avoid possible electric shock.
- Place mounting bracket ④ on ceiling and mark out the points where you would like to drill holes.
- Drill holes on the ceiling and insert plastic anchors ①.
- Attach the mounting bracket ④ to the plastic anchors ① with wood screws ⑥.
- Connect fixture wires ③ to house wires using wire connector ②, black/brown fixture wire to live wire, white/blue fixture wire to neutral wire, yellow & green wire to your ground wire (optional).
- Attach canopy ⑦ to mounting bracket ④ with Machine Screw ⑤ and bolt cap ⑧ provided.
Fixture Assembly
-
Install the lamp arm b ⑬ to the light box b ⑫, fixed with nuts.
Connect the lamp arm holder wire with the main wire ⑭. -
Install the arm a ⑦ onto the lamp a ⑥, fix it with a nut, then use the rod b ⑪ to connect the lamp a ⑥ to the lamp b ⑫.
-
Put the hardware ring ⑧ on the arm a ⑦ and fix it with screws ⑨.
-
Put the main wire ① through the rod a ⑤ to the top of the ceiling plate ④. Put the rod a ⑤ on the lamp a ⑥, then put the ceiling plate ④ on the boom ⑤a and fix it with the nut ②.
-
Install the glass ⑩ to the hardware ring ⑧ as above diagram.
-
Install E12 bulb, E12 led bulb recommended, support to use Max 40 watts per bulb.
Trouble Shooting
- Missing/Broken Parts
- Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.
- Bulbs Do Not Light Up
- Check your power and switch to make sure it’s power on.
- Check the bulb to make sure it’s installed correctly.
- Change a new bulb.
- Check the wires to make sure they are connected correctly.
- Bulbs Flicker/Noisy Operation
- Check the bulb to make sure it’s installed correctly.
- Change a new bulb.
- Make sure your bulb is dimmable if you use a dimmer switch.
- Could Not Install/Assemble
- Take photos of the ceiling/fixture, contact seller for technical support.
Clean And Care
To clean, wipe fixture with soft cloth. Spray from chemical cleaners can
discolor the finish of fixture. Do not use scouring pads, powders, steel wool
or abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are
needed. Available parts can be ordered from place of purchase. Use exact
wording from diagrams when ordering parts.
“We followed the light to a brighter and warmer place.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>