Lowe s H21028 TV Stand Instruction Manual

Lowe s H21028 TV Stand

We offer a diverse range of products to meet the needs of customers.

Indoor Furniture
We are a professional furniture provider with top-notch factories and outstanding designs, Our mission is to provide consumers with new lifestyles. By collecting consumer feedback, we constantly improve our products and create more choices for consumers. If you want to create your space, We are an ideal choice.

WARNING

• All the TV Stands have passed strict quality inspections before delivery. Read this manual carefully to ensure proper usage
• Ensure that all parts and hardware are available before beginning assembly

SAFETY INSTRUCTION

NOTICE

1. Children are not allowed to operate.
2. Faster installation is possible with power tools.
3. Do not pull the door vigorously to prevent the storage cabinet from tipping over.
4. Please attach the storage cabinet to the wall with an anti-tip device after installation is complete.
5. When using the storage cabinet for the first time, please keep it in a ventilated environment to allow the smell to fully evaporate.
6. When placing the partitions, please make sure the nails are firmly installed to prevent the partitions from falling off.
7. If any parts are missing, broken, damaged or worn, discontinue use of the product until repairs are made and/or factory replacement parts are installed.
8. Do not use this product in a manner inconsistent with the manufacturer’s instructions, as this may void the product warranty.
9. If accessories are missing, please contact customer service for communication in time, we provide 7×24 hours of customer care.
10. Do not use any attachments or accessories other than the original factory attachments and accessories.
11. Do not alter this equipment. Any alteration will create a safety hazard.

WARNING
The product must be assembled by an adult before use. Serious or fatal injury may occur from unexpected assembly or use.

1. During the assembly process, keep all parts away from babies or children.
2. Always securely fix this product to the wall. Make sure the wall area to be drilled is free from hidden electrical wires, water and gas pipes.
3. The use of tip-over restraints may only reduce, but not eliminate the risk of tip-over.
4. Unless specially designed to accommodate, do not set heavy objects on top of this product.
5. Place the heaviest items on the lowest shelf.
6. Never allow children to climb or bang on drawers, doors or shelves.

Safety information

• Important information
• Please read closely and carefully
• Save this information

• The nut should be in the centre of the cam lock when the two panels are joined.
• The Cam lock should be inserted before the nut.

TOOLS REQUIRED

• PHILLIPS SCREWDRIVER
• 2Persons Assembly
• Minimum 60 Minutes For Assembly

HARDWARE

PARTS LIST

BOARD IDENTIFICATION

ASSEMBLY INSTRUCTION

1. Insert wood dowel (C) into parts(3), and (4). Attach parts(3)and (4).

2. Attach pieces (E) to secure the connection in parts (3) and part and a Phillips (4) using screw (D) head screwdriver.

3. 1. Insert wood dowel (C) into parts (15,16) Attach parts (2) to the wood dowels of parts(15) and (16). Attach part (15)to the wood dowels of the part (16).
   2. Attach pieces (E) to secure the connection in parts (15) and part (16) using screw (D) and a Phillips head screwdriver.

4. 1. Insert 12 cam bolts (A) into parts (3,4)
   2. Insert 6 wood dowels (C) into parts (1,2).
   3. Attach parts (3, 4) to the wood dowels of parts (1, 2)using cam lock (B) and Phillips head screwdriver. while attaching parts (15,16)to parts (3,4) using cam bolt(A) cam lock (B) and Phillips head screwdriver.

5. 1. Insert 4 cam bolts (A) into part (13).
   2. Insert wood dowel (C) into parts (9, 10).
   3. Attach parts (13) to the wood dowels of parts (9, 10) using a cam lock (B) and a Phillips head screwdriver. (Pay attention to the installation orientation of the panels.)

6. 1. Insert 4 cam bolts (A) into parts (9,10).
   2. Insert wood dowel (C) into parts (9, 10).
   3. Attach parts (12) to the wood dowels of parts (9,10) using cam lock (B) and Phillips head screwdriver (Pay attention to the installation orientation of the panels.)

7. Insert 12 cam bolts (A) into parts (7,8).

8. 1. Insert 4 cam bolts (A) into part (3,4).
   2. Insert 6 wood dowel (C) into parts (9,10,13).
   3. Aftach parts (9,10) to the wood dowels of parts (3, 4) using cam lock (B) and Phillips head screwdriver.

9. 1. Insert 8 wood dowel (C) into parts (3,4, 12,15, 16).
   2. Attach parts (7,8) to the wood dowels of parts (3,4,12) using cam lock (B) and Phillips head screwdriver.

10. Slide panel (11) into the grooves.

11. 1. Insert wood dowel (C) into parts (5), and (6). Attach parts (5) and (6).
    2. Attach pieces (E) to secure the connection in parts (5) and part (6) using screw (D) and a Phillips head screwdriver.

12. 1. Insert 2 cam bolts (A) into parts (5,6)
    2. Attach part (14) to parts (5,6) using cam lock (B) and Phillips head screwdriver.

13. 1. Insert 10 cam bolts (A) into parts (5,6)
    2. Insert 10 wood dowels (C) into parts (7,8,9,10,13).
    3. Attach part (14) to parts (5,6) using cam lock (B) and Phillips head screwdriver.

14. Insert door hinges (F) on part (17) using screw (D) and a Phillips head screwdriver.
    Remove the protective film

15. Attach parts (2) to parts (7,8) using screw (D) and a Phillips head screwdriver.
    If your door panels do not fit after installation, please adjust them as follows:

16. Adjust the screws at I to move the hinge up and down to adjust the up-and-down position of the door panel.

17. Adjust the screws at ll to adjust the distance between the door panel and the vertical panel.

18. Adjust the screws at Ill to adjust the distance between the door panels

  * Tighten the screws again after adjustment.

16. NOTE: Dear customer, if you purchase a TV stand & fireplace set, the package for the fireplace and the package for the TV stand will be delivered separately. If you purchase only the TV stand, the fireplace is not included.

  * Remove four silver screws from the sides of the heater (two screws on each side)
  * Remove the tempered glass by lifting it from the lugs on the side.![Lowe s-H21028-TV-Stand-Fig- \(29\)](https://manuals.plus/wp-content/uploads/2024/05/Lowe-s-H21028-TV-Stand-Fig-29.png)

17. 1. Secure the fireplace after adjusting it to the proper position with the 4 screws removed earlier.
    2. Place the crystal stones in the groove of the fireplace.

18. Place the front glass surround over the front of the fire aligning the slot in the bracket at each side of the glass panel with the lugs on the sides of the fire.

  * Put the fireplace panel back on.

19. 1. Put the light strip wire through the hole (one long wire and one short wire):
    2. Put the long one on the side farther from the fireplace wire; and the short one on the side closer to the fireplace wire:
    3. Tear off the double-sided tape of the light strip and stick it on the board:
    4. Hold the light strip with the clip and lock the screw.

HELP CENTER

Question about your product? We’re here to help. Visit us at:

We Stand Behind the Quality of Their Furniture

1. If you have any issues with your item please let us know! We will always do our best to come up with a solution that you will be happy with.
2. Please get in touch with our customer service team before returning the product.
3. And pls do not throw the original boxes) if you have not finished assembling or confirmed no quality issues.

Length of return period:

1. Items can be returned within 30 days of purchase.
2. In the meantime, everything you purchase from us comes with a one-year warranty.

Who is responsible for the return shipping fee:

We will cover the return shipping fees if:

1. Your item has a manufacturing defect in its materials or workmanship. For example, torn wicker or misaligned screw holes. We will send you a prepaid shipping label after the photos are sent.
2. Your item has been damaged in transit. For example, glass is broken or the wicker is damaged. We will send you a prepaid shipping label after the photos are sent.
3. You receive the wrong boxes) due to a warehouse error. We will send you a prepaid shipping label after photos are sent of the wrong SKU numbers on the outer box (es).
4. One or more boxes are lost in transit. We will send you a prepaid shipping label if you no longer want the item.

However, we still hope to work with you for a better solution instead of a return. Please don’t hesitate to contact our customer service team.

The customer will cover the return shipping fees if:

1. You don’t like the products) after receiving the boxes).
2. You no longer need the products) but you have received the boxes).
3. You buy the products) by mistake but you have received the boxes).
4. Order/Shipment cancellation failed and you have received the boxes).

Return Request

To get a full refund as described in this return policy, all items must be:

1. In a brand new/unused condition, please provide photos before and after packaging.
2. When returning, all accessories and parts are firmly packed in all original packaging.

If your return does not meet the requirements, you may not get a full refund.

• When will I be refunded?
  The refund is released once the goods have been returned to our warehouse.

• What if the product is damaged/defective outside of the valid return period?
  We want you to be a happy customer. Please reach out to us by email and we will come up with a solution to make sure you are satisfied.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>