gooboy 64604 LED Grave Candle User Manual

gooboy 64604 LED Grave Candle

Specifications

• Item number: 64604
• Light source: LED
• Quantity (pcs.): 1
• Operating voltage: 3.0 V
• Light colour: warm white
• Rated Luminous flux: 3 lm
• Colour temperature: 2700 K
• Max. power consumption: 0.02 W
• Nominal lifetime: 10000 h
• Operation temperature range: Not specified
• Protection level: IP44
• Dimmability: Not dimmable
• Material: Not specified
• Colour: Not specified
• Dimensions: Not specified
• Weight: 63 g
• Batteries (not included in delivery): LR06, Mingon, AA, 1.5 V
  (Quantity: 2)

Product Usage Instructions

Safety instructions

The user manual is part of the product and contains important information for correct use. If you have any questions or concerns not addressed by the documentation, please contact your dealer or producer. Please note that this product is not meant for children and is not a toy.

Description and function

The product is a battery-operated LED grave light designed for outdoor use (IP44). It features flickering LED lighting and a switch with two positions – ON/OFF.

Product

The LED grave light is designed to provide a warm white light with a luminous flux of 3 lm and a colour temperature of 2700 K. It operates on a voltage of 3.0 V and has a maximum power consumption of 0.02 W. The LED has a nominal lifetime of 10000 hours. The product is not dimmable and has an IP44 protection level.

Scope of delivery

The product comes with an LED Grave Candle and a User Manual.

Operating Elements

Refer to Fig. 1 for the location of the operating elements:

1. ON/OFF switch
2. LED
3. Kerzendeckel (Candle lid)

Intended use

The LED grave light is intended to be used as a decorative lighting solution for graves.

Preparation

Before using the product, follow these steps:

1. Loosen the sealed lid from the outer housing and remove the LED candle.
2. Carefully detach the candle lid from the candle housing and remove the battery compartment.

Operation

CAUTION: Ensure correct polarity when inserting batteries.

1. Insert two new batteries into the battery compartment,
   observing the polarity of plus and minus.

2. Replace the battery compartment and the candle lid.

3. Place the LED candle in the outer housing.

4. Place the sealed lid on the outer housing and press it firmly shut.

Changing the batteries

• If the luminosity of the LED grave light becomes weaker or it can no longer be switched on, the batteries need to be changed.
  One set of batteries lasts approximately 720 hours (30 days), but this duration may be shortened due to temperature.

Maintenance, Care, Storage and Transportation

• The product is maintenance-free. For heavy stains, you can use a slightly moist and soft cloth for cleaning. Please avoid using excessive water.

Disposal instructions

• Properly dispose of the product according to local regulations.

FAQ (Frequently Asked Questions)

Q: Can I use this product indoors?

• A: The LED grave light is designed for outdoor use, but you can also use it indoors if desired.

Q: Are batteries included with the product?

• A: No, the batteries (LR06, Mingon, AA, 1.5 V) are not included in the delivery.

Q: Is the LED grave light waterproof?

• A: The LED grave light has an IP44 protection level, which means it is protected against water splashes from any direction.

Safety instructions

In general

• The user manual is part of the product and contains important information for correct use.
• Read the user manual completely and carefully before use.
• The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
• Do not modify products and accessories.
• Do not short-circuit connectors and circuits.
• In case of damage and/or missing gaskets, the product must no longer be used.
• Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.
• Use product, product parts and accessories only in perfect condition.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.
• Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against accidental use.
• Do not look directly into the LED.

Batteries

• The cells are replaceable.
• Do not mix old and new batteries
• Only use batteries of the same or equivalent type as recommended.
• Do not mix alkaline, carbon-zinc or nickel-cadmium batteries.
• Remove leaked, deformed or corroded batteries from the product and dispose of them with appropriate protectives.
• Do not throw into fire.

Description and function

Product

• The product is battery battery-operated LED grave light for outdoor use (IP44).
• It has flickering LED lighting and a switch (2 positions – ON/OFF).

Scope of delivery

• LED Grave Candle, User Manual

Operating Elements

See Fig. 1.

1. ON/OFF switch
2. LED
3. Outer housing
4. Sealed lid
5. Candle housing
6. Battery compartment
7. Candle lid

Specifications

Light colour

Rated Luminous flux

Colour temperature

| warm white 3 lm

2700 K

Max. power consumption| 0.02 W
Nominal lifetime| 10000 h
Operation temperature range| -10 °C ~ +50 °C
Protection level| IP44
Dimmability| not dimmable
Material| Polypropylene (PP)
Colour| white, gold, black
Dimensions| Ø 7.3 cm x 12.3 cm
Weight| 63 g
Batteries (not included in delivery)
Type| LR06, Mingon, AA, 1.5 V
Quantity (pcs.)| 2

Symbols used

Direct current| IEC 60417- 5031|
---|---|---
Not dimmable| –| ****

Intended use

• This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use. We do not permit using the device in other ways as described in chapters “Description or Function“ and „Safety Instructions“. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.
  IP44: This product is protected against splash and contact with foreign objects ≥ Ø 1 mm.

Preparation

• Check the scope of delivery for completeness and integrity.

Operation

Inserting the batteries

• NOTICE! Material damage due to incorrect power supply and handling
• Only use the batteries specified in the chapter „Specifications“ or batteries of an equivalent type.
• Make sure that the sealed lid is firmly attached to the outer housing so that no moisture can get inside.
• Loosen the candle lid particularly carefully so as not to damage the connection to the battery compartment.

1. Loosen the sealed lid (4) from the outer housing (3) and remove the LED candle.
2. Carefully detach the candle lid (7) from the candle housing (5) and remove the battery compartment (6).
   • The battery compartment is attached to the candle lid. Rough handling can cause the connection to come loose.
3. Insert 2 new batteries into the battery compartment, observing the polarity of plus and minus.
4. Replace the battery compartment and the candle lid.
5. Place the LED candle in the outer housing.
6. Place the sealed lid on the outer housing and press it firmly shut.

Changing the batteries

• When the luminosity of the LED grave light becomes weaker or it can no longer be switched on, the batteries must be changed.
• One set of batteries lasts approximately 720 hours (30 days). The duration may be shortened due to temperature.

Switching on and off

• Slide the ON/OFF switch to the „ON“ position to switch on the LED grave light.
• Slide the ON/OFF switch to the „OFF“ position to switch off the LED grave light.

Maintenance, Care, Storage and Transportation

• The product is maintenance-free.
• NOTICE! Material damage
• Only use a dry and soft cloth for cleaning.
• Use a slightly moist and soft cloth for heavy stains.
• Do not use detergents or chemicals.
• Store the product out of the reach of children and in a dry and dust-protected ambience when not in use.
• Remove batteries / rechargeable batteries when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal instructions

• According to the European WEEE directive, electrical and electronic equipment must not be disposed of with consumer waste. Its components must be recycled or disposed of apart from each other.
• Otherwise, contaminative and hazardous substances can damage health and pollute the environment.
• As a consumer, you are committed by law to dispose of electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices’ lifetime for free.
• Particulars are regulated by national rights. The symbol on the product, in the user manual, or on the packaging alludes to these terms.
• With this kind of waste separation, application, and waste disposal of used devices you achieve an important share of environmental protection.
• WEEE No: 82898622

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>