Lowe s 9723 8-Light Modern Gold Traditional Dry Rated Chandelier Installation Guide

Table of Contents

Specifications

General Safety Precautions
Before starting the installation process, ensure to follow these safety precautions:

Assembly and Installation Steps

Lock the loop and tube on the nipple of the fixture.
Attach the mounting bar with a threaded nipple and screw collar loop to the outlet box.
Attach quick links to the screw collar loop and chain, then slide the lock ring and canopy down the chain.
Thread the wires through the chain and make appropriate wire connections as per instructions.
Raise the canopy against the ceiling and secure it in position with the lock ring.
Place the glass shade onto the socket and secure it with the socket ring.
Align the hole of the bottom ring to the arm tube of the fixture body and secure it with set screws.
Install bulbs, ensuring not exceed the maximum recommended capacity.

Frequently Asked Questions (FAQ)

Q: What should I do if some parts are missing?
A: If you find any parts missing, please contact customer support for assistance in obtaining the necessary components.
Q: Can I install this fixture without prior electrical knowledge?
A: It is recommended to seek the services of a qualified electrician if you are unfamiliar with proper electrical wiring connections to ensure safety and compliance.

Please read carefully and save these instructions, as you may need them at later.

CAUTION

WARNING: Risk of Fire. Consult a qualified electrician to ensure the correct branch circuit conductor.
Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock

GENERAL

All electrical connections must be under local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustration.

Lock the loop and tube (16) on the nipple (17) of the fixture.
Attach mounting bar (6) with threaded nipple (10) and screw collar loop (12) and lock ring (13) to outlet box (1) secured with two box screws (9).
Attach quick links (15) to the screw collar loop (12) and the appropriate amount of chain(15).
Slide the lock ring (13) and the canopy (11) down the chain (14). Open the quick link (15) at the other end and then hook onto the top of the fixture (16), and close the quick links.
Thread the wires through the chain and the screw collar loop (12) and thread the nipple (10) up to the outlet box.
Pull out the outlet wire and ground wire from the outlet box Make wire connections with wire nuts.
- Ribbed wire (W/O marking) or white wire from light to White wire (2) from the power source.
- Smooth wire (W marking) or black wire from light to Black wire (3) from the power source.
- Attach the ground wire (4) to the mounting bar (7) with a ground screw (8).
Raise the canopy (11) against the ceiling and lock it in position by lock ring (13) onto The screw collar loop (12).
Place the glass shade (20) onto the socket (19), then secure it with a socket ring (21).
Aligning the hole of the bottom ring (22) to the arm tube of the fixture body (18), securing with set screws (23)
Install bulbs: (bulbs not included) (Don’t exceed the maximum capacity recommended on the sockets).