HCT-626 Bluetooth Water Timer

Product Information

Specifications

• Model: HCT-626

• Ideal for: Lawns, gardens, shrubs, allotments,
  patios, pots, holiday watering, etc.

• Hose Tap Connection: 3/4″ Internal Thread with
  built-in filter

• Water Outlets: 3/4″ External Thread

• Working Temperature: 3°C – 45°C

• Working Pressure: 0.05 Mpa – 0.8 Mpa

• Ingress Protection: IPX5

• Power Supply: Battery operated

• Applicable Locations: Outdoor

• Bluetooth Range: About 15 meters (no obstacles
  between devices)

Product Usage Instructions

1. Download the App

Search in APP Store / Google Play or scan the QR code of Smart
Life.

Register an account in the APP.

2. Connect the Bluetooth Water Timer

1. Take the water timer near your smart phone, turn on the phone
   Bluetooth and enter the homepage of the APP.

2. Place the batteries into the timer and the light indicators
   blink quickly to start connection. If not paired in 1 min, hold
   either button for 3 sec to reset.

3. Add the timer as prompted by the APP or scan the QR code to add
   in the APP.

3. Operating Instructions in App

Quick Guide

1. After connecting, the timer will be displayed on the page.
2. Access the main page of the device to set up various functions
   like Temperature, Weather Delay, Next Watering Notification,
   etc.

Frequently Asked Questions (FAQ)

Q: How far is the Bluetooth range of the water timer?

A: The Bluetooth range between the water timer and a smartphone
is approximately 15 meters without obstacles.

Q: Can I manually water using the Bluetooth water timer?

A: Yes, you can manually water by setting the runtime and
initiating manual watering through the app interface.

BLUETOOTH WATER TIMER
Model: HCT-626
Ideal for watering: lawns, gardens, shrubs, allotments, patios, pots, holiday watering, etc.

DEVICE INTRODUCTION
HOSE TAP CONNECTION 3/4 ” Internal Thread with built-in filter

LIGHT INDICATORS RESET / MANUAL BUTTONS

WATER OUTLETS 3/4 ” External Thread

Working Temperature

3 – 45

Working Pressure

0.05 Mpa-0.8 Mpa

Ingress Protection

IPX5

Power Supply

2 ×1.5 V `AA’Alkaline Batteries

Applicable Locations

Outdoor

Distance Between Bluetooth Water Timer and Smart Phone About 15 m (no obstacles between them)

The Company reserves the right to change the definition and upgrade the device without prior notice.

DOWNLOAD THE APP
Search in APP Store / Google Play or scan the QR code of Smart Life.
Register an account in the APP.
CONNECT THE BLUETOOTH WATER TIMER
1. Take the water timer near your smart phone, turn on the phone Bluetooth and enter the homepage of the APP.
2. Place the batteries into the timer and the light indicators blink quickly to start connection. If it does not get paired in 1 min, the light indicators will turn off. Please hold either of the two buttons for 3 sec to reset.
3. Add the timer as promoted by the APP or scan the QR code to add in the APP.

OPERATING INSTRUCTIONS IN APP

QUICK GUIDE: 1. After finishing the connection, the timer paired will be
displayed on the page.
2. Click “2-Outlet Bluetooth Water Timer” and get into the main page of the device. Set Up

Temperature Weather Delay
Next Watering Notification

Battery Indcator Irrigation Area Manual Watering

Open /Close

Schedule Spray Record

TIPS: Remote control and more functions can be achieved if used together with the Company’s Bluetooth Gateway.
WEATHER DELAY: 1. Click “Weather Delay” and choose the period you want.
Schedule plans and Spray plans will not be performed within the set time. 2. Once Weather Delay is successfully set, it will work on both Area A and Area B. 3. If you want to start “Smart Weather” function, first please add this timer to the Company’s Bluetooth gateway.
MANUAL WATERING: 1. Click “Manual Watering” to set the runtime and save it. 2. Click ” ” button to start the Manual Watering. When the
set runtime is over, the timer will stop watering itself. 3. If you want to cancel Manual watering in midway, please
Click ” ” button again.
NOTES:
The connection delay will be about 0.5 to 3 seconds, please do not repeatedly click the button.

SCHEDULE: 1. Click “Schedule” and enter the “Add” page. 2. Click “Add” to enter the content setting page. 3. Set start time, runtime and loop / single time, then click “Save”. 4. Back to the listing, the on-off button on the right side of the
plan will be green, indicating it has been set successfully. 5. Up to 5 plans can be added by setting like above steps for
each Area.
This figue shows: Schedule mode will water 10 min, start time is 20:15, just single time.
This figue shows: Schedule mode will water 30 min, start time is 06:00, every Sunday, Tuesday, Thursday and Saturday.

SPRAY: 1. Cick “Spray” and enter the content setting page. 2. Set start time, end time, spray duration, interval duration and
loop / single time, then click “Save” below and on-off button on the upper right corner into green.
This figue shows Spray mode will water 5 min, duration time is 20 min, start from 08:00 and stop at 10:00, single time.
This figue shows: Spray mode will water 10 min, duration time is 30 min, start from 18:30 and stop at 21:00, every Monday, Wednesday and Friday.
TIPS:
Please upgrade the version according to the APP prompts and regularly clean up the cache to ensure that the device can work well.

INSTALLATION
1. Attach the timer to an outdoor hose faucet and the water outlet to the water pipe firmly.
2.An O-ring / adapter / quick connectors / PTFE tape can be used as a protection against water leakage.
3. Turn on the faucet and keep it on.
NOTES:
When the timer is used, the water inlet must be equipped with a filter to prevent impurities from blocking the valve, which may resulting in valve switch failure or water leakage. Please clean or replace the filter regularly. The timer itself does not generate pressure and needs tap water pressure or water source with pressure to work well. The working temperature of the timer is 3 – 45 . When it reaches the freezing temperature or the timer is not in use for a long time, please take it off, pick out the batteries, empty the water in the valve tubes, and store it in an indoor dry place.

TROUBLESHOOTING
1. The smart phone Bluetooth is enabled but the APP fails to connect to the Bluetooth Water Timer. The distance between the smart phone and the timer maybe exceed the Bluetooth’s effective range, please adjust the distance.
2. Long press the reset button for 3 seconds but the indicators do not blink. Reinstall / replace the batteries and retry.
3. The hose tap connection / water outlet of the device is leaking. The thread is not properly screwed. Please try again. The thread does not match. Please use an adapter / quick connector / PTFE tape if needed.
4. Little water flows out when watering. There might dirt particles blocked in the valve tube. Please clean the filter in time. It is likely the local municipal water pressure is low.
5. No water comes out of the timer within the set time. The faucet is off. Please turn it on. The batteries are exhausted. Please replace with new ones. When ” ” displays on the page, that means the power is
about to be exhausted and the timer cannot work properly. Weather Delay / Smart Weather is on. Please turn it off.

AFTER-SALES SERVICE
In case of device performance failures, 1- year-warranty after sale is included (excluding accessories).
Damages caused by unauthorized maintenance, misuse, collision, negligence, abuse, accident, modification, incorrect use of the device or its parts and force majeure are not
covered by the warranty.
You may contact local distributors or special repair stations with the device invoice and warranty card if your device fails due to quality problems.

WARRANTY CARD

Customer: Contact Add: Device Name: Purchase Add:

Tel.:
Model: Order Date:

DECLARATION ON HAZARDOUS SUBSTANCES IN ELECTRONIC PRODUCTS

PARTS Pb
Plastic PCBA Accessories

Hazardous Substances

Hg

Cd

Cr(VI) PBB

PBDE

This form is compiled in accordance with the requirements of SJ / T11364.
Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is below the limit requirement of the GB / T26572 standard. Indicates that the concentration of the hazardous substance contained in all the homogeneous materials of this part is above the requirement of the GB / T26572 standard.

Manufacturer:
Ningbo Hanci Electrical Co., LTD. No.127 -129, Dexing Road, Ninghai County, Ningbo City, China. 315600
Made in China

FCCCaution Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay cause undesired operation.
AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecould void the user’s authorityto operatetheequipment.
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference
toradiocommunications.However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures: -Reorient orrelocatethereceivingantenna. -Increasethe separationbetween theequipmentand receiver. -Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiveris connected. -Consultthe dealer oranexperienced radio/TVtechnician for help
The devicehas been evaluated to meetgeneralRFexposurerequirement.The device can be used in portableexposurecondition withoutrestriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>