tp-link DS-P7500-08 Optical Line Terminal Instructions

tp-link DS-P7500-08 Optical Line Terminal

Product Information

Regulatory Compliance
The Optical Line Terminal (OLT) is compliant with the following regulations:

• FCC part 15
• Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863
• Radio Equipment Regulations 2016
• Industry Canada Statement – CAN ICES-3 (A)/NMB-3(A)
• VCCIA
• BSMI Notice

Safety Information
Please follow these safety guidelines when using the OLT:

• Do not attempt to disassemble, repair, or modify the device. Contact customer service for assistance.
• Place the device with its bottom surface downward.
• Keep the device away from water, fire, humidity, or hot environments.
• Plug the product into wall outlets with an earthing connection through the power supply cord.
• The plug on the power supply cord is used as the disconnect device and should be easily accessible.
• The socket outlet should be installed near the equipment and easily accessible.
• In Denmark, the device’s plug must be connected to a grounded socket.
• Disconnect all power sources before handling the device to avoid shock hazards.

Product Label Symbols
The product label on the bottom of the device and its I.T.E. power supply contains the following symbols:

• Class II equipment
• Class II equipment with functional earthing
• Alternating current
• Direct current
• Polarity of d.c. power connector
• For indoor use only
• Dangerous voltage
• Caution, risk of electric shock
• Energy efficiency marking
• Protective earth
• Earth
• Frame or chassis
• Functional earthing
• Caution, hot surface
• Caution
• Operator’s manual
• Stand-by
• ON/OFF (push-push)
• Fuse
• Recycling symbol for Waste electrical and electronic equipment (WEEE)

Specifications
There are no specifications provided in the given text extract. Please refer to the full user manual for detailed specifications.

Product Usage Instructions

To use the Optical Line Terminal (OLT), follow these instructions:

Step 1: Installation

1. Select a suitable location for the OLT.
2. Ensure the device is placed with its bottom surface downward.
3. Keep the device away from water, fire, humidity, or hot environments.
4. Connect the OLT to a wall outlet with an earthing connection using the provided power supply cord.
5. Ensure the socket-outlet is easily accessible and installed near the equipment.
6. In Denmark, connect the device’s plug to a grounded socket.

Step 2: Operation
Once the OLT is properly installed and powered on, refer to the operator’s manual for specific instructions on operating the device.

Step 3: Maintenance
Do not attempt to disassemble, repair, or modify the device. Contact customer service for any maintenance or service needs.

FAQ

• Q: Where can I find the full user manual for the OLT?
  A: The full user manual can be found on the manufacturer’s website at [insert website link].

• Q: What should I do if I encounter radio interference with the OLT in a domestic environment?
  A: If you experience radio interference, take adequate measures as required. Contact customer service for further assistance.

• Q: How should I handle the disposal of the OLT?
  A: The OLT must be handled pursuant to European directive 2012/19/EU to minimize its impact on the environment. You have the choice to give the product to a competent recycling organization or return it to the retailer when purchasing new electrical or electronic equipment.

FCC Compliance Information Statement

• Product Name: Optical Line Terminal
• Model Number: DS-P7500-08, DS-P8000-X2, DS-P7001-16, DS-P7001-08, DS-P7001-04, DS-P7001-01
• Responsible party: TP-Link USA Corporation 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail: sales.usa@tp-link.com.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning

• This is a class-A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
• TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
• The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/ce.

UKCA Mark Warning

• TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2016.
• The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)

Safety Information

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Place the device with its bottom surface downward.
• Keep the device away from water, fire, humidity, or hot environments.
• Plug the product into the wall outlets with an earthing connection through the power supply cord.
• The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• In Denmark: “Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til stikproppens jord.”;
  • In Finland: “Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan” ;
  • In Norway: “Apparatet må tilkoples jordet stikkontakt” ;
  • In Sweden: “Apparaten skall anslutas till jordat uttag” .

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply.

Optical Line Terminal
© 2023 TP-Link 1910013563 REV1.0.0.

References

• Link: Simple, secure one-click payments
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>