VALBERG Cyclonic S9 Vacuum Cleaner Instruction Manual

VALBERG Cyclonic S9 Vacuum Cleaner

Product Information

Specifications

• Model: 982165 – Cyclonic S9
• Vacuum Power Output: 300 W max.
• Dust Cup Capacity: 0.5 L
• Suction Power: 2000 mAh
• Noise Level: Class II
• Operating Voltage: Rechargeable battery
• Battery Capacity: 2000 mAh
• Protection Class: Class II

Product Usage Instructions

Charging the Battery
The battery must be charged before first use and whenever the low battery LED indicators start to flash. Use the provided AC charger to charge the battery.

Removing/Replacing the Battery
To remove or replace the battery, follow the instructions provided in the user manual. Make sure to use the correct replacement battery for optimal performance.

Installing the Wall Mount
Mount the wall mount plate securely on a suitable wall surface using the provided screws and wall plugs. Ensure it can support the weight of the vacuum cleaner and its accessories.

Assembly/Disassembly
Follow the assembly instructions to attach/detach accessories such as the floor brush, mini brush, crevice tool, etc., as neededfor cleaning different surfaces.

Operation
Press the ON/OFF button to start using the vacuum cleaner. Use the high /low-speed button to adjust the suction power based on your cleaning needs.

Cleaning and Maintenance
Regularly clean the dust cup, HEPA filter, and other removable parts as instructed in the user manual to maintain optimal performance.

Troubleshooting
If you encounter issues like the brush not rotating or rapid blinking of battery indicators with overheating, refer to the troubleshooting guide in the manual for possible causes and solutions.

Storage
After use, store the vacuum cleaner in a dry and safe place to prevent damage and ensure it is ready for the next use.

FAQ

Q: What should I do if the vacuum cleaner doesn’t turn on?
A: Ensure the battery is charged. If the low battery LED indicators are flashing, recharge the battery using the provided charger.

Thank you!
Thank you for choosing this VALBERG product. VALBERG products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.

Product overview

Parts

• A Floor brush with roller (for removing dust from hard/smooth surfaces or those that scratch easily)
• B Floor brush release button
• C Tube
• D Tube release button
• E Battery LED indicator
• F High/low speed button
• G Battery release buttons
• H ON/OFF button
• I Battery charging port
• J Battery
• K HEPA filter release button
• L HEPA filter cover
• M Dust cup
• N Dust cup release button
• O Wall mount
• P Wall plugs and screws (x 2) for the wall mount
• Q Mini brush (for stubborn dirt on furniture, smooth floors and carpets)
• R Crevice tool (for hard-to-reach places)
• S 2 x HEPA filters (one filter is pre-installed and the other is a spare)
• T Foam filter (inside the dust cup)
• U AC charger
• V Cleaning tool

Product overview

• Unpack and remove all labels from the unit. Please check that all of the unit’s parts are included and intact. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

• This vacuum cleaner is for household use only. It has not been designed for industrial or professional use by cleaning companies.
• Any other use may damage the unit or cause injury.

Specifications

• Model: 982165 – Cyclonic S9
• Vacuum power output: 300 W max.
• Dust cup capacity: 0.5 L
• Suction power: High speed – 90 W
• Low speed – 23 W
• Noise level: High speed – 83 dB
• Low speed – 75 dB
• Vacuum pressure: High speed – 20 kPa
• Low speed – 9 kPa
• Operating voltage: Adapter input – 100~240 V, 50/60 Hz
• Adapter output – 30 V, 400 mAh
• Product voltage – 25.9 V DC
• Rechargeable battery capacity: 2000 mAh
• Protection class: Class II

Product usage

Charging the battery
The battery must be charged before first use, whenever the vacuum will not turn on because the battery is too low or whenever the low battery LED indicators start to flash.

NOTE: When the power is too low and the battery needs to be charged, the vacuum will automatically turn off.

1. Insert the charger plug into the battery charging port. The battery can be charged either fixed to or separated from the vacuum cleaner.
2. Insert the plug into the mains socket.

• There are 5 battery LED indicators. The indicators will simultaneously flash when the battery level is low and will consecutively flash when the vacuum cleaner is charging. Once the vacuum cleaner is fully charged, the indicators will remain steadily lit for 5 minutes before turning off when the unit enters standby mode.
• The indicators indicate the battery level: 5 steady lights = the battery is full; 1 steady light = the battery level is low.
• It takes around 5 hours to fully charge the battery.
• Once charged, the battery can be used for 10 minutes at high power and 30 minutes at low power.

WARNING!

• Do not use the unit while it is charging.
• After charging, always unplug the charger from the battery and mains socket.
• Do not charge the battery at temperatures below 0°C or above 50°C.

CAUTION
Only use the removable power supply provided with this unit to recharge the battery: ZD012A300040EU.

Removing/replacing the battery
Please replace the battery whenever the performance drops or it becomes damaged in any way.

WARNING! Always unplug the charger from the mains socket before removing the battery.

1. To remove the battery, press the battery release button and remove it.
2. To reposition the battery, slide it into its housing until it clicks into place.

Installing the wall mount

NOTE: Find a suitable location for the wall mount.

• Preferably install the wall mount near an mains socket.
• Only install the wall mount in a location where the ambient temperature is constant and between +5 °C and 40 °C.
• Place it in a clean, dry place, away from heaters and direct sunlight.
• Make sure that the wall on which the wall mount will be secured is able to support the weight of the unit and its accessories.

1. Place the wall mount on a wall. Make sure that the base of the wall mount is approximately 122 cm above the floor so that the brush of the assembled stick vacuum gently rests on the floor. Mark the drill holes for the screws with a pencil.
2. Then, drill the screw holes and insert the wall plugs. Place the wall mount on a wall. Screw the mount to the wall.

DANGER! RISK OF ELECTRIC SHOCK!

• Do not pierce the electric cables (or water pipes) located in the wall.
• Do not install the wall mount on a metal wall.

Assembly/Disassembly

To assemble:

1. Align the tab and notch on the brush or crevice tool with the tube and push them together until both parts are fully engaged. A click will be heard when the floor brush is securely attached to the tube.
2. Push the tube into the handheld vacuum until it clicks into place.
3. Push the brush or nozzle directly into the handheld vacuum, by making sure that the tab and notch are correctly aligned.

Floor brush:

• With bristles – Use it on all types of flooring, including hard and smooth surfaces, in addition to carpets that require a deep clean.
• With the roller – Use it on surfaces that scratch easily, in addition to hard or smooth surfaces, such as parquet flooring or tiles to vacuum up hair, dust and larger debris, e. g. cat litter.
• Directly attach the floor brush (or roller brush, depending on the floor surface being cleaned), to the handheld vacuum cleaner in order to be able to easily vacuum the stairs. The LED indicators on the floor brush are useful for poorly lit areas.

NOTE : Please refer to the Cleaning and maintenance section for the instructions regarding changing the head of the floor brush.

• Mini brush – Use the brush with or without the bristles to remove stubborn dirt from furniture, floors and carpets.
• Crevice tool – Use the brush with or without the bristles to remove dirt from tight or hard-to-reach corners.
• 5 Press the button on the mini brush and slide the brush up or down to use the bristled or felt section of the brush.

To disassemble

• Make sure the unit is switched off.
• 6 Detach the tube from the floor brush or handheld vacuum by pressing the appropriate release button and pulling the two components apart.
• 7 The mini brush or crevice tool can be removed by twisting and pulling them apart. Slide the unit onto the wall bracket hook to stow it away. Secure the accessories in the slots as shown.

Operation

Once the unit is assembled, it is ready for use.

8

1. Press the Power button to turn on the vacuum. The LED indicators will light up when the vacuum is on.
2. Press the High/low speed button as required to switch from a high power level to a low power level and vice versa.
3. To turn off the vacuum, press the Power button again.

WARNING : Moving Parts!
Always turn off the vacuum before attaching or changing accessories.

NOTE: For best performance, empty the dust cup when it is full or after each use (as shown in the Cleaning and maintenance section).

Cleaning and maintenance

WARNING!

• Always turn off and unplug the unit from the power supply before cleaning.
• Never immerse the unit in water or any other liquid.
• Detach all accessories from the main unit.
• Clean the unit with a soft, slightly damp cloth. Make sure that no liquid enters the unit.
• When cleaning the unit, never use abrasive products, metal brushes, scourers, wire sponges or sharp utensils.
• After cleaning, dry the unit thoroughly.

Cleaning the dust cup and filters
Clean the dust cup after each use or when it is full and has reached the MAX mark. Clean the filters and central part of the filter whenever they are full, there is a loss of suction or on a quarterly basis.

9 Detach the base of the dust cup to empty the contents.

10

• Turn the dust cup anticlockwise and remove it.
• Unscrew the lower part of the filter system and remove it. Wipe the dust cup, the cover and the central part of the filter with a dry cloth.
• Remove the foam filter located in the central part of the filter.
• 11 Press the HEPA filter release button and remove the HEPA filter cover. The filter is found on the underside of this cover.
• 12 Clean the filters with water and leave them to thoroughly dry naturally before using them again.

WARNING! To prevent damage to the unit, only use dry, intact filters!

Reassemble all the parts in reverse order.

13 Cleaning the floor brush

1. Use a coin to turn the screw anticlockwise towards the unlock symbol .
2. Lift up the clip that secures the right side of the brush in place.
3. Pull the right side of the brush, then slide the left side off the pin that holds it in place.

NOTE

• Regularly remove all hair, fur and debris to ensure your vacuum cleaner maintains its optimal performance. If the brush is very dirty, wash it with water and let it dry completely.
• Use a damp cloth to clean the floor brush’s housing. Do not immerse it in water.

Cleaning the wheel axles

1. Insert a screwdriver under the wheel axle and push up to pry and consequently, dislodge it. emove any wires or other objects that may have become lodged in the wheel axles.
2. Reassemble the wheels by pushing them firmly into the recess.

Cleaning the accessories
Separate the tube from the accessories or the handheld vacuum. Remove any and wash with water. Dry thoroughly before using the unit again or putting it away period of time.

Cleaning with the multi-purpose tool
When cleaning any part of the vacuum, the multi-purpose tool can be used to remove dust and debris from any of its hard-to-clean areas, such as the filters and their compartments.

Troubleshooting

Storage

• Always unplug the unit before storing it.
• Store the unit in a fresh, dry and clean place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

WARRANTY CONDITIONS

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL – FRANCE
*proof of purchase required.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>