ZYC 4 Inch 6 Pack Canless LED Recessed Lighting Instruction Manual

ZYC 4 Inch 6 Pack Canless LED Recessed Lighting

INSTALLATION INSTRUCTIONS

1. Turn Off power from the electrical panel prior to installation.
2. Determine the location where you want to install the fixture and cut a hole in the ceiling according to the template in the box (fig. 1)
3. Open the junction box cover and remove the appropriate knockout(s) on the side panel (fig. 2)
4. Insert the electrical supply cable through the knockout and secure with a cable connector
5. Using quick-connect pLEh-in terminals, connect the ground wire to the ground wire terminal; black wire to black wire terminal; white wire to white wire terminal (fig. 2).
6. Place all wiring and connections back into the junction box and close the cover. Connect the junction box to the light panel with the quick connect system.
7. Insert the junction box through the mounting hole (fig. 3).
8. Push clips on the fixture upwards and insert fixture base into the mounting hole. Release the clips and fixture will be pulled flush to the ce1l1ng (fig. 4).
   NOTE: The _back of the unit and the junction box must not be exposed to damp locations (fig. 5).

Cut-Hole size
4″Round 041/4″ (0108mm) 6″Round 061/4″(0158mm)

Information on how to set-up the switch inside junction box

You can choose the temperature of the light (from soft to cold) from a switch inside the junction box and maintain that temperature

Turn off the Downlight mode for 1-5 seconds, then turn on the night light mode.

Documents / Resources

| ZYC 4 Inch 6 Pack Canless LED Recessed Lighting [pdf] Instruction Manual
4 Inch 6 Pack Canless LED Recessed Lighting, 4 Inch 6 Pack, Canless LED Recessed Lighting, LED Recessed Lighting, Recessed Lighting, Lighting
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>