VALBERG 983089 Steam Iron Instruction Manual

VALBERG 983089 Steam Iron

Product Information

Specifications

• Model: 983089 – STEAMPLUS-3000
• Power supply: 230V ~ 50-60Hz
• Rated power input: 3000W

FAQs

• Q: Why is my iron emitting smoke when I first plug it in?
  • A: The emission of smoke when you first plug in the iron is normal and should stop after a short time. It is due to certain parts being lightly greased.
• Q: Can I use chemically de-limed water in the iron?
  • A: It is advisable to use only distilled or demineralized water in the iron. Chemically de-limed water or perfumed water should not be used.

Thank you!

Thank you for choosing this VALBERG product.
VALBERG products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day!

Welcome to ELECTRO DEPOT.

Product Overview

Parts

• A. Soleplate
• B. Skirt
• C. Water tank
• D. Spray nozzle
• E. Cleaning button
• F. Water inlet lid
• G. Temperature knob
• H. Steam knob
• I. Spray button
• J. Handle
• K. Swivel cord
• L. Lamp
• M. Brust button
• N. Measuring cup

Product Overview

• Unpack and remove all labels from the unit except the nameplate. Please check that all parts are included and intact. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

• This unit is intended solely for household use and the ironing purposes described in this instruction booklet. It has not been designed for industrial or commercial use. Only use this unit indoors, in a dry place.
• Any other use may damage the unit or result in fire, an electric shock or injury.

Specifications

Product usage

General instructions

When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding plastics. This is quite normal and it stops after a short time.
We also recommend passing the iron over an ordinary cloth before using it for the first time.

Suggestions before using the iron for the first time

1. Certain parts of the iron have been lightly greased therefore the iron could give off a little smoke when plugged in for the first time. This will cease after a short while.
2. Before using the iron for the first time, remove the plastic protector from the base (if it has one) clean the base with a soft cloth.
3. Keep the base very smooth. Do not run it over metal objects (such as against the ironing board, buttons, zips, etc.)
4. Pure wool fibres (100% wool) can be ironed with the appliance in the steam position. By preference, select a high steam position and use a dry ironing cloth.

Selecting the temperature

1. Check the ironing instructions on the garment to be ironed.
2. If the garment does not have any ironing instructions but you know the kind of fabric in question, use the chart below.
3. Fabrics that have some kind of finish (polishing, wrinkles, contrasts…) can be ironed at the lowest temperatures.
4. If the fabric contains several kinds of fibres, always select the temperature applicable, if an article contains 60% polyester and 40% cotton, you must always choose the temperature corresponding to polyester and without steam.
5. First classify the articles to be ironed according to the most suitable ironing temperature: wool with wool, cotton with cotton, etc. as the iron heats up as fast as it cools, start by ironing the articles requiring the lowest temperature such as those made of synthetic fibres. Progress towards those that require the highest temperatures.
6. Turn the temperature control until it is in front of the appropriate signal according to the following:

How to fill the water tank

1. Unplug the iron.
2. Set the steam ruler to dry ironing.
3. Fill the tank through the filling hole.
4. If you have hard water, it is advisable to use only distilled or demineralized water. Do not use chemically de-limed water or perfumed.
5. Do not store the iron with water in the tank.

Steam ironing

1. Fill the iron as described in the section “how to fill the water tank”.
2. Plug the iron into the mains.
3. Steam ironing is only possible when the highest temperatures shown on the temperature control are selected. Otherwise, water may escape through the soleplate.
4. Wait until the pilot light goes out, which indicates that the selected temperature has been reached.
5. Turn the steam button to the required position.
6. When the ironing is finished and during breaks in ironing, place the iron in its upright position.
7. Disconnect the iron from the mains supply. Pour of any remaining water and leave the iron to cool off.

Spray

1. The spray can be used in any position, either in dry or steam ironing, as long as the water tank is filled with water.
2. Press the spray button for this function

NOTE

• This button has to be pressed repetitively to start this function for the first time.

Shot of steam

Shot of steam give extra steam for removing persistent wrinkles.

1. Place the temperature selector at the “max” position and wait until the pilot light goes out.
2. Wait for a few seconds for the steam to penetrate the fibre before pressing again.

NOTE:

• For the best steam quality, do not use more than three successive bursts each time. Several pumping actions are needed to start this function.
• Excessive use of this feature will cause the iron to cool, ensure that the pilot light is out, before operating the shot of steam control.

Cleaning And Maintenance

Cleaning and maintenance

• Disconnect the appliance from the mains, before cleaning.
• Do not use solvents or abrasive products to clean the iron, clean with a damp cloth.

Defects and repairs

• Do not attempt to replace a defective mains lead. The appliance has to be returned to an authorized service centre for repair.

Troubleshooting

The steamer does not produce steam| •  Check the water level and the water tank inlet cover is properly covered.

•  Press the steam activation button harder.

---|---
Water spills from the water tank| •  Make sure water is not over the MAXIMUM level.

•  Make sure water tank inlet cover is properly closed.

The steamer is producing a loud humming or pumping sound| •  Check water level; if there is no water or it is low, refill the water tank.
The steamer does not seem to be removing creases easily| •  Hold the steamer in an level position and stretch the fabric downward to ensure best results.
Unsure when to use the fabric brush| •  Use when steaming is to directly touch the fabric.

•  When steaming delicate fabric, such as silk to reduce the risk of water dripping onto the garment while steaming.

Avoiding discolouring of metal accessories on the garment| •  Do not directly hover the garment steamer over the metal accessories.

•  Use caution and steam around the metal accessories.

Storage

• Always unplug the unit before storing it. Wait until the iron is cool before putting it away.
• Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

WARRANTY

WARRANTY CONDITIONS

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.

*proof of purchase required.

ELECTRO DEPOT

• 1 route de Vendeville
• 59155 FACHES-THUMESNIL
• Made in PRC

References

• valberg.de is available for purchase - Sedo.com
• Tienda de electrodomésticos y electrónica | ELECTRO DEPOT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>