FORTIN EVO-ALL Tharness Standalone Installation Guide

FORTIN EVO-ALL Tharness Standalone

Specifications

• Model: THAR-TOY13
• Vehicle Compatibility: Lexus LC 500H Push-to-Start 2018-2024
• Compatible Module Required: Firmware version 79.[66] or later
• Manufacturer Date: After 2019
• Programmable Options: Hood trigger, Hybrid mode, OEM Remote Monitoring

Product Usage Instructions

Installation Requirements:

It is mandatory to have the following for installation:

• Flash Link Updater or Flash Link Mobile tool
• Microsoft Windows computer with an internet connection or Flash Link Mobile App on Android/iOS device
• Hood Pin (Hood Contact)

Installation Steps

1. Ensure the vehicle is compatible with the THAR-TOY13 module.
2. Install the hood pin switch if not already present. Set the function A11 to OFF if remote start with the hood open is not desired.
3. Connect the module following the wiring diagram provided in the manual.
4. Program the bypass options as needed using the Flash Link Updater or Flash Link Mobile tool.
5. Test the system to ensure proper functionality.

Operation:

To start the vehicle remotely, follow these steps:

1. Ensure all doors are closed.
2. Use OEM remote or smartphone to start the vehicle.
3. Monitor the LED diagnostics for any issues.

FAQ

Q: Can the THAR-TOY13 module be installed by anyone?

A: No, this module must be installed by a qualified technician to avoid any damage to the vehicle.

Q: What should I do if I encounter issues during installation?

A: If you face any problems during installation, contact customer support for assistance.

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle functions supported in this diagram (functional if equipped)

COMPATIBLE MODULE REQUIRED

FIRMWARE VERSION

To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

Program bypass option

IF THE VEHICLE IS NOT EQUIPPED
WITH FUNCTIONAL HOOD PIN
Program bypass option (Vehicle hybrid only)

UNIT OPTION

DESCRIPTION

• OEM Remote status (Lock/Unlock) monitoring
• Push-to-Start
• Hood trigger (Output Status).
• Hybrid mode (Vehicle hybrid only)

NOTES

The vehicles OEM remote and SmartKey are still operable during remote start.

NO KEY TAKEOVER

MANDATORY INSTALL

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLEDIF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

PARTS REQUIRED NOT INCLUDED

Notice: the installation of safety elements are mandatory.
The hood pin and the valet switch are essential security elements and must be installed.

STAND-ALONE CONFIGURATION

• Program bypass option
  OEM Remote Stand Alone Remote Starter:

• Program bypass option with oem remote:

• Program bypass option with RF KIT antenna:
  

REMOTE STARTER FUNCTIONALITY

REMOTE STARTER DIAGNOSTICS

• x2 flash: Brake ON
• x3 flash: No tach
• x4 flash: Ignition before start
• x5 flash: Hood Open

REMOTE STARTER WARNING CARD

CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE

WARNING
REMOTE STARTER

THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.

This guide may change without notice. See www.fortin.ca for latest version.

WIRING CONNECTION AUTOMATIC TRANSMISSION

DCRYPTOR PROGRAMMING PROCEDURE

Parts required (not included)

• FLASH LINK UPDATER,

• FLASH LINK MANAGER

• SOFTWARE | PROGRAMME

• Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet

• FLASH LINK MOBILE

• FLASH LINK MOBILE APP

• Smartphone Android or iOS with Internet connection (Internet provider charges may apply)

• BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE.

1. Press and hold the programming button: Connect the 4-PIN Data-link connector.
   The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.

2. Release the programming button when the LED is BLUE.
   If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

3. Insert the required remaining connectors.
   

4. Do not press the brake pedal.
   Press the Push-to-Start button twice to turn on the ignition.
   Wait for the BLUE LED to flash rapidly and constantly.

5. Press the Push-to-Start button once to turn off the ignition.
   The BLUE LED will turn off.
   If the RED and YELLOW LEDs alternate:
   GO STEP 6 at Dcryptor process.
   CONTINUED NEXT PAGE
   If the LEDS turn OFF:
   The module is now programmed.
   

6. Disconnect all the connectors and after the Data-Link (4-pins) connector.

7. Use the tool:
   FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
   *Parts required (not included)

8. AFTER DCRYPTOR PROGRAMMING COMPLETED
   Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connector.
   

The module is now programmed.

REMOTE STARTER / ALARM VERIFICATION

REMOTE STARTER FUNCTIONALITY

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING

TECH SUPPORT

Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE

WEB UPDATE

www.fortinbypass.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>