TITAN MS-P112B Speaker Box User Manual

June 17, 2024
Titan

TITAN MS-P112B Speaker Box

Packing Contents

  • 1 X Speaker
  • 1 X Remote Control
  • 1 X User’s Manual
  • 1 X Power Cable
  • 2 X UHF Wireless microphone

Specifications

  • 12 Inch 2 Way Professional speaker
  • box with rechargeable battery.
  • Max Power: 3000W
  • RMS Power: 150W
  • Woofer: 12 ” Diameter, with 1.5″ (38 mm)
  • KSV voice coil
  • Tweeter: 1″ Diameter (25 mm)
  • Frequency Response: 50HZ-20KHZ
  • Sensitivity : 95 dB(+/-3dB)
  • Connectivity: Bluetooth, XLR
  • Line In , XLR Line Out
  • Battery: 12V – 7000 mAh
  • Units Meassures: 35 x 40 x 61.5cm (Pr x An x Al)
  • Unit Weight: 18.4KGS
  • Box Meassures: 44.5 x 41.5 x 68.5CM (Pr x An x Al)
  • Box Weight: 20.8kgs

Panel Specification

  • Play/Pause: Press to play a song or pause while playing a song.
  • Previous: Press once to jump previous song/Press and hold to diminish the volume level.
  • Next: Press once tu jump to next song/ press and hold to raise the volume level.
  • Mode: Select an operating modality.
  • Conection Bluetooth
1. To pair the speaker with a bluetooth phone or audio device, press “MODE” reapeatedly on the MP3 player until select this mode.
2. Put your phone or device to be used in bluetooth device discovery mode.
3. When your phone or device shows the “BLUETOOTH” device, confirm the link. TWS: Using Bluetooth TWS (True wired stereo): The speaker includes TWS function via Bluetooth. In case you have two units of the same model at hand, switch to bluetooth mode. When playing for the first time, you must choose one of the speakers as the master. Then press and hold (5 seconds) the play/pause button on the control  panel to connect with another speaker. You willhear indicator sound on “right channel” coming out from main speaker and sound on “left channel” from other speaker after successful pairing. Then you can start Bluetooth operation as usual. Sound will be output from both speakers. When you turn off or change the play mode and back to Bluetooth mode, the two speakers can automatically pair to play in TWS mode. In TWS pairing for the first time, there may be a short “sa sa sa..” sound from the speaker which is not a malfunction. If you turn off the main speaker, TWS playback will stop.

Wireless Microphone

  1. Grille
  2. Power on/off / mute function
  3. Battery Cover. Access to the battery

PRODUCT OVERVIEW

CAUTION

  • Avoid exposing the speaker box to moisture. If they are set up outdoors, Be Sure they are under cover.
  • Do not use nor store the equipment near wet or dap places. It may cause a malfunction or shock hazard.
  • If the power cord is broken, it must be replaced by the manufaturer or service agent or qualifield personnel to avoid risks.
  • To reduce the risk of fire or electric shock, do not expose this equipament to rain or moisture.
  • Clean only with a soft, dry cloth.
    CAUTION: BEFORE USE SPEAKER BOX, PLEASE CHARGE BATTERY FULLY, IT IS BETTER FOR BATTERY LIFE. DON’T PLAY SPEAKER BOX AND CHARGE BATTERY AT THE SAME TIME, OTHERWISE IT WILL AFFECT BATTERY LIFE.

FCC CAUTION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

This device has been tested and found to comply with the limits for a Class B digital reason bue protection against harmfu interference in a residensia installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Howlation irens device dotes that i harmerene will ence to radio or reievision. reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the r eceiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals