goobay 72024 Wireless LED Table Lamp User Manual

: September 25, 2024
: goobay

Table of Contents

goobay 72024 Wireless LED Table Lamp
FAQs
Specifications
Symbols used
Safety instructions
Description and function
Intended use
Preparation
Connection and operation
Maintenance Care Storage and Transportation
CONTACT INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

goobay 72024 Wireless LED Table Lamp

FAQs

Q: Are the bulbs in the table lamp replaceable?

A: No, the bulbs in this table lamp cannot be replaced.

Q: Can the table lamp be used outdoors?

A: Yes, the table lamp has an IP44 protection rating, making it suitable for outdoor use on patios, balconies, and gardens.

Specifications

Item number	72024	73927	73930

Table Lamp
Connections| USB-CTM
Input| 5.0 V, 1.0 A, 4.5 W
Dimensions| Ø 110 x 360 mm
Weight| 725 g
Material| gray cast iron
Color| black| white| bronze
LEDs| 24x SMD LED 2835
Luminous color| warm white
Color temperature| 3000 K
Color rendering index| 80 Ra
Power consumption| 2.8 W
Nominal luminous flux| 180 lm
Protection level | Protection class| IP44 | III
Dimmability| yes
USB Cable

Connectors| USB-CTM plug USB-A plug
Length| 1.0 m
Weight| 21 g
Rechargeable battery
Specifications| 18650 Li-Ion, 3.7 V , 1800 mAh,

6.6 Wh

Symbols used

Safety instructions

The user manual is part of the product and contains important information for correct use.

Read the user manual completely and carefully before use. The user manual must be available for uncertainties and passing the product.
Keep this user manual.
Do not open the housing.
Do not short-circuit connectors and circuits.
Do not modify products and accessories.
Use product, product parts, and accessories only in perfect condition.
Do not repair defective products yourself, but contact the dealer or the manufacturer. Not meant for children. The product is not a toy!.
Secure packaging, small parts, and insulation against accidental use.

Blinding

Never look directly into the light source.
Never look through a magnifying glass into bright light sources such as LED lamps or lasers.
Do not aim the beam of light into the eyes of other persons or animals. The eyes can be damaged!
Avoid stresses such as heat and cold, moisture and microwaves, vibrations, and mechanical pressure.
Install the system and devices attached to it in a way that persons cannot beinjured, or objects not be damaged for example by dropping or stumbling.
Only use the table stand on a stable, non-slip and horizontal surface.
Only use the USB cable supplied.
Use product, product parts, and accessories only in perfect condition.
In case of questions, defects, mechanical damage, trouble and other problemsnon-recoverable by the documentation, contact your dealer or producer.
Do not cover the product.
Avoid proximity to flammable surfaces and substances.
Do not place or hang any objects on or near the LED desk lamp. The bulbs in this table lamp cannot be replaced!

Battery hazards

The batteries are not replaceable.

Do not expose the battery to heat, for example in the form of radiant heat, or fire.
Leave leaked, deformed, or corroded batteries inside the product and dispose of it with appropriate protectives.
Batteries and rechargeable batteries may be damaged and leak if not used for the intended purpose.
Extreme heat can lead to explosion and/or leakage of corrosive liquid.
Do not short-circuit the battery.

There is a danger of Explosion, fire, heat, smoke, and/or gas

Description and function

Product

The table lamp is in a Scandinavian design for every living room, bedroom, or dining room. Made from high-quality, solid metal.

With touch operation and the integrated rechargeable battery, the light can be used anywhere wirelessly and flexibly
Thanks to its splash protection (IP44 protection rating), the table lamp is also suitable for the patio, balcony, or garden.

Scope of delivery

Wireless LED Table Lamp, USB cable, User Manual

Operating Elements

See Fig. 1.

1 ON/OFF touch switch
2 USB-CTM socket
3 USB-CTM plug
4 USB-A plug

Intended use

We do not permit using the device in other ways as described in chapters “Description or Function“ and „Safety Instructions“. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

IP44 : This product is protected against splash and contact with foreign objects ≥ Ø1 mm.

Preparation

Check the scope of delivery for completeness and integrity.
Compare the specifications of all used devices and ensure compatibility.

Connection and operation

Charging

The battery must be fully charged before initial start-up!

Open the cover of the USB-CTM socket (2).
Insert the USB-CTM plug (3) of the supplied USB cable into the USB-CTM socket (2) in the lower part of the lampshade. See Fig. 2
Connect the USB-A plug (4) to a suitable charger. The charging time depends on the charge status of the battery. The lamp is fully charged after approx. 4 hours.
After charging, pull the USB-CTM plug (3) out of the USB-CTM socket and close the cover.

Switching on/off

1. Before each use, check that the light is stable.
2. Switch the light on or off by briefly touching the ON/OFF touch switch (1). The light lasts for approx. 3.5 to 4 hours.

Dimming

1. Switch on the light as described under point 5.2.
2. You can dim the brightness by pressing and holding the ON/OFF touch switch (1). The brightness setting is retained even after switching off.

Maintenance Care Storage and Transportation

The product is maintenance-free.

NOTICE! Material damage

Switch the product off and unplug it from the mains before each cleaning.
Only use a dry and soft cloth for cleaning.
Do not use detergents or chemicals.
Store the product out of the reach of children and in a dry and dust-protected ambiance ambience when not in use.
Charge the batteries every three months to ensure they maintain capacity when not in use for an extended period of time.
Store cool and dry.
Keep and use the original packaging for transport.

Disposal instructions

According to the European WEEE directive, electrical and electronic equipment must not be disposed of with consumer waste. Its components must be recycled or disposed of apart from each other. Otherwise, contaminative and hazardous substances can damage health and pollute the environment. As a consumer, you are committed by law to dispose of electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated by national rights. The symbol on the product, in the user manual, or on the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share of environmental protection. WEEE No: 82898622