goobay 53870 Outdoor Work Light User Manual

goobay 53870 Outdoor Work Light

Specifications

Symbols used

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use.

The user manual must be available for uncertainties and passing the product.

• Keep this user manual.

Risk of life by electric shock!

Due to the M16 cable gland, the LED outdoor fl oodlight is considered installation material and should only be installed, maintained and repaired by qualifi ed electricians. Through improper installation you endanger:

• your own life
• the life of the users of the electrical system

With an inappropriate installation you risk heavy damages to property, e.g. by fi re. The perso-nal adhesion threatens with damages to property and person for you.
For the installation in particular the following expertise is necessary:

• The appropriate “5 safety rules” : De-energize, secure against restarting, determine deenergizing, grounding and short circuiting, cover energized neighbouring parts or pro-vide it with barriers

• selection of the suitable tool, the measuring instruments and if necessary the personal protection equipment

• evaluation of the measurement results

• selection of the electricity installation material for the securing of the switching off conditions

• IP enclosures

• installation of the electrical installation material

• kind of the supply network (TN-system, IT-system, TT-system) and the electrical opera-ting conditions following from it (classical protective grounding, protective grounding, ne-cessary additional measures, etc.)

• Do not open the housing.

• Do not modify product and accessories.

• Use product, product parts and accessories only in perfect condition.

• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.
  Not meant for children. The product is not a toy!

• Secure packaging, small parts and insulation against accidental use.
  The lamps are not replaceable!

• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.

• Follow local installation and building regulations.

• Choose mounting hardware according to the substrate conditions and the product weight.

• Never look directly into the light source.

• Do not aim the beam of the light into the eyes of other persons, animals or refl ective surfaces.
  The eyes can be damaged.

• Dispose broken glass with suitable protective measures.

Hot surfaces

• Do not touch in or immediately after use.
• Avoid proximity to fl ammable surfaces.

Heat storage

• Do not cover the product.
• Do not use in sealed environments.

Description and function

Product
Very bright and functional LED outdoor luminaire in compact design for house entrances, garages, carports and access paths.

• Quick and easy installation thanks to practical M16 cable gland with plug-in function for clamping range/cable diameter 4-10 mm.
• With large beam angle of 100° or 110°, suitable for illuminating facades
• Stable, bevelled mounting bracket for wall mounting or mounting on a tripod with rotation range of up to 180°

Scope of delivery

Operating Elements

See Fig. 1.

1. Glass pane
2. Refl ector
3. LEDs
4. Mounting bracket
5. Housing
6. Locking screw
7. M16 cable gland

Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use.
We do not permit using the device in other ways like described in chapter “Description and Func-tion“ and „Safety Instructions“. This product is protected to IP65 against water and touch and is suitable for both indoor and outdoor use. Not attending to these regulations and safety instruc-tions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used products.
   These must match or be in the specifi ed range.

Mounting and installation

Mounting the LED outdoor floodlight (Fig. 2 – 4)

• Place and use the tools safely.
• Do not hold limbs between shear parts.

1. Select the mounting location according to the following criteria:

   • The surface must be stable.
   • There must be no fl ammable objects in the vicinity.
   • A distance of 1 m from the illuminating object must be maintained.
   • he product must be mounted absolutely straight.
     See also fig. 1 and 3.

2. Select suitable mounting material according to the selected surface and product weight. Mounting material is not included in the scope of delivery.

3. Mark the hole spacing X and the cable entry Y using the mounting bracket and a suita-ble pin.
   See fig. 1.

4. Drill the mounting holes with a suitable tool. See fig. 2 and 3.

5. Fix the LED outdoor spotlight. See fig. 4.

Connecting the LED outdoor floodlight

WARNING: Risk of electric shock

• Have M16 cable gland connected ONLY by experienced electrician.

• Observe the safety instructions listed in chapter 1.

• Before working on the product, disconnect the line from the power supply, switch off the fuse and secure it against being switched on again.

• Check and ensure that there is no voltage before working on the product.

• Models without a fi tted earthing contact plug must be permanently installed on the mains supply. The power cables used must have a minimum cross-section of 1.0 mm². Stranded wires must be fi tted with wire end ferrules.
  Pre-treatment of conductor ends: the length of the exposed ends of the conductors must not exceed 6 mm.

• Fixing method: Fixed in the M16 cable gland.

  • Open the M16 cable gland by turning it anticlockwise until the terminal block is exposed as in Fig. 5.
  • Insulate the cables.
  • Slide the parts of the M16 cable gland shown in Fig. 6 over the connection cable.
  • Push the cable ends into the corresponding connections of the connector of the M16 cable gland so that the connections of the LED outdoor fl oodlight (N, L, protective earth/GND ) are connected with the corresponding cable colour of the mains connection (N = blue, L = brown, GND = green-yellow). Screw the mains cables tight using a screwdriver as shown in Fig. 6.
  • Insert the plug connector of the M16 cable gland into the connection of the outdoor LED spotlight. The groove on the connector and the pin in the connection provide the correct position.
  • Close the M16 cable gland by turning it clockwise until all parts are fi rmly connected, as shown in figs. 7 and 8.
    Note: The light sources are not interchangeable!

Maintenance, Care, Storage and Transportation

The product is maintenance-free.

NOTICE! Material damage

• Regularly check the tightness of product / screws.

• Do not over-tighten the screws.
  Threads can be damaged.

• Only use a dry and soft cloth for cleaning.

• Do not use detergents or chemicals.

• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.

• Store cool and dry.

• Keep and use the original packaging for transport.

Disposal instructions

Product

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment. As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the endof the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection. WEEE No: 82898622

Packaging

Packaging can be disposed of free of charge at the suitable collection points – paper belongs in paper bins, plastics belong in yellow sacks and glass belongs in used glass bins. DE4535302615620

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>