YUNJI WP27 Smart Phone User Manual
- May 15, 2024
- Yunji
Table of Contents
YUNJI WP27 Smart Phone
Specifications
- Model: WP27
- Power: 8500
- Power Consumption: 33W
| Manufacturer’s Name | SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD |
|---|---|
| Smart Phone Model | WP27 |
| Operating Temperature | -10°C to 40°C |
RF Specification
| Function | Operation Frequency | Max RF Output Power | Limit |
|---|---|---|---|
| BT(BR+EDR) | 2402MHz-2480MHz | 9.11dBm | 20 dBm |
Product Information
The WP27 is a versatile device that supports various wireless communication protocols, including Bluetooth, Wi-Fi, GSM, GPRS, EGPRS, WCDMA, LTE, FM Receiver, GPS Receiver, and NFC. It operates on different frequency bands with specific output power limits for each protocol, ensuring reliable and efficient connectivity.
Product Usage
Bluetooth:
The device supports Bluetooth technology with the following specifications:
- Operation Frequency: 2402MHz~2480MHz
- Max RF Output Power: 9.11dBm (for BR+EDR)
Wi-Fi:
The device supports Wi-Fi connectivity on multiple bands, including 2.4GHz
and 5GHz. Ensure to connect to the appropriate network based on your
requirements.
Cellular Networks:
The device is compatible with GSM, GPRS, EGPRS, WCDMA, and LTE networks.
Make sure to configure the device with the correct frequency bands for optimal
performance.
FM Receiver, GPS Receiver, NFC:
The device includes features like FM radio reception, GPS positioning, and
NFC capabilities. Utilize these functions as needed for your applications.
Maintenance
- Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively, and to extend the mobile phone’s lifespan as much as possible.
- Follow the instructions in the manual to open the phone. Do not disassemble the accessories and do not try other methods.
- Avoid dropping, hitting, or shaking your phone. Handling the phone may cause the screen to break, damaging the internal circuit board and delicate structure.
- Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, and soft cloth.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, press and hold the power button for more than 12 seconds, the mobile phone will be forced to restart (unlock the phone during restart) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power supply. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery’s life.
Standard packaging of this machine includes: packaging box, mobile phone, manual, protective film, USB data cable, charger.
Safety
- The phone must be at least 15 cm away from any medical implant or pacemaker and should never be placed in the pocket of a coat.
- Do not expose the device and other batteries together with high temperatures or heat-generating equipment like sunlight, heaters, microwave ovens, or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not in progress, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, do not attempt to replace the battery yourself to avoid damaging the battery or device.
- The use of an unapproved or incompatible power source, charger, or battery may cause fires, explosions, or other hazards.
- Do not disassemble or puncture the battery, insert other objects, or immerse in water or other liquids to prevent battery leaks, overheating, fire, or explosion.
- Do not drop, crush, scratch, or pierce the battery to avoid subjecting the battery to excessive external pressure, which could lead to an internal short circuit and overheating of the battery.
- The company assumes no responsibility for accidents caused by non-standard charging equipment.
If you wish to read the full CE compliance, please check this link: www.oukitel.com.
Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. The device is tested and complies with the RF exposure requirements for body-worn operations with a minimum separation distance of 10mm from the user’s body.
The device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range in certain European countries.
EU Declaration of Conformity: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD declares that the Smart Phone WP27 is in compliance with the essential requirements of Directive 2014/53/EU and can be used in Europe with restrictions.
FCC ID: 2ANMU-WP27SPUT
For more detailed information on product safety and regulatory compliance,
please visit www.oukitel.com.
Certifications
The device has received the following certifications: FCC, CE, RoHS.
Manufacturer Address: A-side A2 Building 2/F Enet New Industrial Park, No.20 Dafu Industrial Zone, Aobei Community, Guanlan, Longhua New District, Shenzhen China.
Restrictions in the 5 GHz band: According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland (FI), Sweden (SE), Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI). The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.
EU Declaration of Conformity We, SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD (202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen , China) hereby declares that this Smart Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. According to Article 10(2) of Directive 2014/53/EU, the WP27 can be used in Europe but with restriction.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Frequently Asked Questions (FAQ)
What should I do if the device encounters interference?
If the device experiences interference, ensure that it is not causing harmful interference itself and can accept external interference without affecting its operation.
How can I optimize the device's wireless performance?
To enhance wireless performance, position the device in an open area with minimal obstructions and interference. Additionally, ensure that the device is configured with the correct frequency bands for the desired network connections.
What should I do if the phone battery overheats?
Disconnect the charger from the device and unplug it from the power outlet. Avoid using the device while charging and do not expose it to high temperatures.
How can I clean the mobile phone?
Do not use chemical solvents or detergents. Wipe the case with a soft cotton cloth dampened with water or mild soap. Clean the lens with a soft, dry cloth.
What is the recommended way to charge the phone?
Disconnect the charger when the phone is not charging. Do not leave a fully charged battery connected to the charger for extended periods to prevent overcharging and to extend battery life.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>