renkforce Full-HD Webcam Instruction Manual
- June 7, 2024
- renkforce
Table of Contents
Operating instructions
FULL-HD Webcam RF-WC1080P1
Item No. 1899867
Intended use
This webcam is designed to take images and record videos in HD quality and
forward them to a computer for display and further processing. It connects to
a USB 2.0 port on a computer.
This product is intended for indoor use only. Do not use it outdoors. Contact
with moisture (e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product.
Using the product for purposes other than those described above may damage the
product. In addition, improper use can cause hazards such as a short circuit
or fire. Read the operating instructions carefully and store them in a safe
place. Only make this product available to third parties together with its
operating instructions.
This product complies with statutory, national, and European regulations. All
company and product names included herein are trademarks of their respective
owners. All rights reserved.
Package contents
• Webcam
• Operating instructions
http://www.conrad.com/downloads
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads
or scan the QR code on this
page. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight
important information in these operating instructions. Always read this
information carefully.
The arrow symbol indicates special information and tips on how to use the
product.
Safety information
Read the operating instructions and safety information carefully. If you do not follow the safety instructions and information on proper handling in these operating instructions, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
a) General information
-
The product is not a toy. Keep it out of the reach of children and pets.
-
Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
-
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapours and solvents.
-
Never expose the product to mechanical stress.
-
If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress. -
Handle the product carefully. Jolts, impacts or a fall even from a low height may damage the product.
-
Always observe the safety instructions and operating instructions of any other devices which are connected to the product.
-
Consult a technician if you are not sure how to use or connect the product, or if you have concerns about safety.
-
Maintenance, modifications and repairs must only be carried out by a technician or a specialist repair centre.
-
If you have any questions which are not answered in these operating instructions, contact our technical support service or other technical personnel.
Operating elements
- Power LED
- Camera lens
- Microphone opening
- Flexible clamp
Attaching the webcam to a monitor
• Place the webcam in the desired position on the monitor.
• Use the flexible clamp (4) to fix the webcam in place.
Setup
a) Plug and Play
• Connect the device to a USB port (USB 2.0) on your computer.
• Windows® automatically starts the installation of the required drivers.
Follow the on-screen instructions.
• If you experience problems, refer to your computer manual.
b) Operation
• The power LED (1) turns on when the webcam starts working.
• Launch the desired webcam software on your computer. On Mac computers you
can use software such as PhotoBooth or FaceTime.
Care and cleaning
• Disconnect the product before cleaning.
• Do not immerse the product in water.
• Never use aggressive detergents, rubbing alcohol or other chemical
solutions, as these may damage the housing or cause the product to
malfunction.
• Use a dry, lint-free cloth to clean the product. Be careful not to scratch
the lens (2).
• Keep the microphone opening (3) free from dirt and fluff.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product according to the relevant statutory regulations. You thus fulfil your statutory obligations and contribute to environmental protection.
Technical Data
Power supply …………………………………. Via USB2.0
Operating current ……………………………. max. 200 mA
Detection angle ………………………………. 65° (horizontal)
Camera panning …………………………….. Fixed position
Frame rate …………………………………….. 30 fps
Video resolution ……………………………… max. 1920 x 1080
Image sensor …………………………………. 1/2.7“ CMOS
Connection ……………………………………. USB2.0
USB cable length ……………………………. 200 (±3 cm)
System requirements ………………………. IBM PC, compatible PC or laptop with USB port
Pentium 1G or higher CPU, at least 500 MB free storage space, 256 MB RAM,
DirectX 9.0 VGA For HD 1080P video recordings 2.4 GHz Intel Core™ 2Duo, 2 GB
RAM, 1 GB free storage space
Microphone ……………………………………. Built-in
Supported operating systems …………… Windows XP® and higher, Mac OS X 10.5 and
higher, DirectX 9.0 VGA
Operating conditions ……………………….. 0 to +40 ºC, 5–80 % relative humidity (non-
condensing)
Storage conditions ………………………….. -20 to +70 ºC, 5–85 % relative humidity (non-
condensing)
Dimensions (W x H x D) …………………. 104 x 47 x 36 mm
Weight ………………………………………….. 103 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com). All rights including
translation reserved. Reproduction by any method (e.g. photocopying,
microfilming or capturing in electronic data processing systems) requires
prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of
printing. Copyright 2021 by Conrad Electronic SE.
*1899867_v5_0321_02_ds_m_4L
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>