goobay 49216 Outdoor Powerbank 8.0 User Manual

49216 Outdoor Powerbank 8.0

Product Information

• Item number: 49216
• Connections: IN: Micro USB 2.0 socket, OUT: 2x USB-A 2.0 socket
• Input: 5 V, max. 2 A, 10 W
• Output: 5 V, max. 2 A, 10 W
• Solar charging current: 200 mA
• Charging cycles: 500
• Battery: Lithium-Polymer (Li-Pol) 3.7 V, 8000 mAh, 29.6 Wh
• Protection level: IP44
• Dimensions | Weight: 140 x 77 x 22 mm | 246 g
• Protection against: deep discharge, overcharge voltage, over discharge voltage, overcurrent
• Operating conditions: -10°C to +45°C
• Storage conditions: -20°C to +50°C
• Charging cable: Connections – Micro-USB plug, USB-A plug; Cable length – 50 cm

Product Usage Instructions

1. Ensure that the product is fully charged before using it.
2. Compare the technical data of all devices to be connected with the product.
3. To activate the power bank, press and hold the function button for 3 seconds. The LED status indicator will light up to indicate that the product has been activated.
4. To charge the product, connect it to a USB power supply or an integrated solar panel. When the product is charging, the LED status indicator will blink to show the current charging status. Disconnect all cable connections after charging.
5. To charge a mobile device, connect it to the USB-A port of the product using a suitable cable. The LED status indicator will show the current charging status of the mobile device.
6. The product can also be used as a torch or a compass.
7. Do not expose the product to heat or fire.
8. Store the product in a dry and cool place.
9. Dispose of the product and its accessories at authorized collection points or recycling centers to protect the environment.

Specifications

overcurrent
Operating conditions| -10°C ~ +60°C | 25% ~ 70% RH
Storage conditions| -10°C ~ +50°C | 10% ~ 80% RH
Charging cable
Connections| Micro-USB plug, USB-A plug
Cable length| 50 cm

Symbols used

Direct current| IEC 60417- 5031|

---|---|---
Recycling| ISO 7001 – PI PF 066|
Avoid contact with heat/fire| –|

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully be-fore use.

The user manual must be available for uncertainties and passing the product.

• Keep this user manual.

• Do not open the housing.

• Do not modify product and accessories.

• Do not short-circuit connectors and circuits.
  Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.

• Use product, product parts and accessories only in perfect condition.

• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.

Not meant for children. The product is not a toy!

• Secure packaging, small parts and insulation against accidental use.

Battery hazards
The batteries are not replaceable.
Batteries may be damaged and leak if not used for the intended purpose.

• Leave leaked, deformed or corroded batteries in-side the product and dispose it by appropriate protectives.

• Never throw batteries into a fire.
  Extreme heat can lead to explosion and/or leakage of corrosive liquid.

• Do not deform or disassemble the battery. Mechanical damage can cause gaseous substances to escape, which can be highly irritating, flammable or toxic.

• Do not immerse the battery in liquids.
  There is a danger of: Explosion, fire, heat, smoke and/or gas.

• Do not operate the product in an explosive environment.

Blinding

• Never look directly into the light source.
• Do not aim the beam of the light into the eyes of ot-her persons or animals.

The eyes can be damaged!

• Do not use in road traffic!

Description and function

Product
The product is a mobile auxiliary battery and is used to for charging and operating mobile devices. It has an in-tegrated lithium-polymer battery that can be recharged can be charged via USB power supply or via an integ-rated solar panel.
In addition, the product can be used as a torch and has a compass.

Scope of delivery
Outdoor Powerbank 8.0 (8.000 mAh), Charging cable, User Manual

Operating Elements

See Fig. 1.

1. Carabiner
2. Solar panel
3. LED status indicator
4. Function button
5. Compass
6. Torch
7. USB-A socket
8. Micro USB socket
9. Protective cap
10. USB-A plug
11. Micro USB plug

Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use. We do not permit using the de-vice in other ways like described in chapter “Descrip-tion or Function“ and „Safety Instructions“. Not atten-ding to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.
IP44: This product is protected against splash and con-tact with foreign objects ≥ Ø1 mm.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

Connection and operation

Activating the power bank

• Press the function button 1x to activate the pow-er bank.

The power bank switches on automatically when you connect a mobile device. The power bank switches off automatically after a while if no mobile device is con-nected.

Charging the power bank
The power bank is delivered partially charged. Fully charge the power bank before using it for the first time.

1. Open the protective cap.

2. Connect the micro USB socket of the power bank to a USB power source via the charging cable.
   This can be either a 230 V USB charging adapter, a 12/24 V car USB charger or the USB socket of a PC.

3. Disconnect all cable connections after charging.

4. Close the protective cap.

Charging the mobile device

1. Open the protective cap.

2. Connect your mobile device to one of the USB-A sockets.
   Your mobile device is charging.
   It is not recommended to charge several mobile devi-ces at the same time via the power bank.

3. Press the function button 1x each to start and end the charging process.

4. Disconnect all cable connections after charging.

5. Close the protective cover.

Checking the charging status
See Fig. 2.

• Press the function button 1x to activate the power bank.

The charging status is indicated by the LED status indicator.
If no LED lights up despite pressing the function key, the power bank is completely empty. During the charging process, the respective LED flashes to indicate the current charging status. If there is sufficient suns-hine, the power bank is also charged via the solar panel. The green LED then lights up.

Torch
See Fig. 3.

1. Press the function button 1x to activate the Powerbank.
2. Press the function button 2x to switch the torch function on or off.
3. After switching on, press the function button 1x briefly each time to select the other functions.

Maintenance, Care, Storage and Transportation

NOTICE! Material damage

• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Charge the batteries every three months to ensure they maintain capacity when not in use for an extended period of time.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport

Disposal instructions

Product

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment. As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an import-ant share to environmental protection. WEEE No: 82898622

Packaging
Packaging can be disposed of free of charge at the suitable collection points – paper belongs in paper bins, plastics belong in yellow sacks and glass belongs in used glass bins. DE4535302615620

EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.

References

• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>