goobay 58469 HDMI Audio Extractor 4K 30 Hz Instruction Manual

: June 1, 2024
: goobay

Table of Contents

58469 HDMI Audio Extractor 4K 30 Hz
Specifications
Safety instructions
Description and function
Intended use
Connection and operation
Maintenance, Care, Storage and Transportation
Disposal instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

58469

58469 HDMI Audio Extractor 4K 30 Hz

goobay 58469 HDMI Audio Extractor 4K 30 Hz -

Specifications

Item number	58469
Connectors – Inputs	HDMI™ socket, DC socket
Connectors – Outputs	HDMI™ socket, Toslink socket, 3.5 mm jack socket
Input	5.0 V **** , 1.0 A
HDCP specification	HDCP 1.4, 1.3
Data transmission rate	max. 10.2 Gbit/s
Resolution	max. 4K @ 30 Hz (input: up to 10 m; output: up to 10 m)
Colour depth	8-bit
Supported HDMI™ audio formats	Stereo, LPCM, Dolby Digital /DTS (Dolby 5.1,

Symbols used

For indoor use only| IEC 60417- 5957|
---|---|---
Alternating current| IEC 60417- 5032|
Direct current| IEC 60417- 5031|
Class III equipment| IEC 60417- 5180|
Class II equipment| IEC 60417- 5172|

Safety instructions

The user manual is part of the product and contains important information for correct use.

Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the product.
Keep this user manual.

Notes for network separation
The product has no power switch and may be used only in easily accessible outlets to quickly remove it in an emergency and after use.
Voltage-free only with pulled plug.

In case of emergency, after use and during a thunderstorm, pull the mains plug out of the socket directly at the plug housing.
Do not open the housing.
Do not modify product and accessories.
Do not short-circuit connectors and circuits.

A defective device may not be put into operation, but must be disconnected from mains and protected against further use.

Use product, product parts and accessories only in perfect condition.
Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer. Not meant for children. The product is not a toy!
Secure packaging, small parts and insulation against accidental use.

Heat storage

Do not cover the product.
Keep enough space around all devices for a good ventlation and free motion and to avoid damages.

Description and function

2.1 Product
The product is an audio extractor including a power supply that allows the connection of analogue devices (e.g. hi-fi system or soundbar) to an HDMI™ device without a dedicated audio output. The audio extractor is used to detach a digital HDMI™ audio signal from the HDMI™ input and convert it into a 2-channel stereo signal or a multi-channel audio signal (SPDIF).
2.2 Scope of delivery
HDMI™ Audio Extractor 4K @ 30 Hz, Power supply, Charging cable, User Manual

2.3 Operating Elements
See Fig. 1.

Select button
LED status indicators
DC socket
3.5 mm jack socket
Toslink socket
HDMI™ socket (output)
HDMI™ socket (input)
USB-A socket
Euro plug
USB-A plug
DC plug

Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use. We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

Check the scope of delivery for completeness and integrity.
Compare the specifications of all used devices and ensure compatibility.

Connection and operation

5.1 Connection
NOTICE!
Material damage

Disconnect the power supply to the audio extractor before connecting or disconnecting your source and output devices.

See Fig. 2.

Connect a source device (e.g. set-top box, console) to the HDMI™ socket (input) (7).
Connect an output device (e.g. TV) to the HDMI™ socket (output) (6).
To use the ARC function, the HDMI™ output of the audio extractor must be connected to an ARC-compatible HDMI™ socket of the TV.
Connect an audio output device (e.g. soundbar) to the Toslink socket (5).
Optionally, connect another audio output device (e.g. hi-fi system) to the 3.5 mm jack socket (4).
Connection cables are not included in the scope of delivery. Make sure that the source and output devices as well as the connection cables support the resolutions and standards of the product!
Connect the USB-A plug (10) of the charging cable to the USB-A socket (9) of the power supply unit.
Plug the Euro plug (8) of the power supply unit into a free and easily accessible socket.
Connect the DC plug (11) of the charging cable to the DC socket (3) of the audio extractor.
The audio extractor is now supplied with power and the LED status indicator (2) „Power“ lights up red.
Disconnect all cable connections after use.

5.2 Operation
By pressing the select button (1), you can switch between the audio formats for the output. When an audio format is selected, the respective LED status indicator (2) lights up blue. There are 4 settings available:

2.1: In this setting, sound is transmitted via all outputs.
5.1: In this setting, sound in 5.1 format is transmitted via the Toslink socket (5). The other audio outputs are also active.
7.1: In this setting, sound in 7.1 format is transmitted via the HDMI™ output (6). The other audio outputs are also active.
ARC: In this setting, no sound is transmitted to the TV via the HDMI™ output (6). The audio signal is only output via the 3.5 mm jack socket (4) and Toslink socket (5).

5.3 Troubleshooting
If you experience problems such as no picture/sound or poor picture/sound dropout when using the audio extractor, follow these steps to troubleshoot possible problems:

Make sure all cables are properly connected.
Make sure that the connection cables and connected devices are compatible with the standards and resolutions of the audio extractor.
Make sure that the connection cables do not exceed a length of 10 m.
Make sure that the HDMI™ output of the audio extractor is connected to the ARC-compatible HDMI™ socket of the TV.
Make sure that the correct channel is set on the TV.
Make sure that the correct audio format is set for the output on the audio extractor.

Maintenance, Care, Storage and Transportation

The product is maintenance-free.
NOTICE! Material damage

Always disconnect the mains plug before cleaning.
Only use a dry and soft cloth for cleaning.
Do not use detergents or chemicals.
Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
Store cool and dry.
Keep and use the original packaging for transport.

Disposal instructions

**** According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection. WEEE No: 82898622

REV2023-12-15
V2.0aw
Z zastrzeżeniem zmian.
Goobay® by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany | cs@wentronic.com