goobay 53934 Outdoor Fast Charge Powerbank with Solar User Manual
- June 4, 2024
- goobay
Table of Contents
- goobay 53934 Outdoor Fast Charge Powerbank with Solar
- Specifications
- Safety instructions
- Description and function
- Intended use
- Preparation
- Connection and operation
- Maintenance, Care, Storage and Transportation
- Disposal instructions
- EU Declaration of conformity
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
goobay 53934 Outdoor Fast Charge Powerbank with Solar
Specifications
Article number | 53934 |
---|
Connections
| IN: Micro USB 2.0 socket (Type B) IN/OUT: USB-C™ socket OUT: 2x USB-A QC 3.0
socket
Input Micro USB, USB-C™ PD (Power Delivery)| | 5 V , 2 A; 9 V| , 2 A;
12 V| , 1.5 A
Input solar panel| | 5 V| , 0.22 A max.|
Output USB-C™ PD (Power Delivery), USB-A (QC 3.0)| 5 V| , 2 A, 10 W; 9 V| , 2
A, 18 W; 12 V| , 1.5 A, 18 W
Battery| 2x Lithium polymer, 3.7 V , 10000 mAh, 37.0 Wh Total: 20000
mAh, 74.0 Wh
Dimensions | Weight| 179 x 86 x 25.5 mm | 548 g
Protection against| deep discharge, overcharge voltage, overdischarge voltage,
overcurrent
Protection level| IP44
Operating temperature / humidity| 0°C ~ +40°C | 10% ~ 80% RH
Storage temperature / humidity| -20°C ~ +70°C | 20% ~ 70% RH
LED light
Type | Colour| 2835-D-E2-C6950 | White| Light temperature| 6000 – 15000 K
Number of lights| 2| Luminous flux| 22 – 28 lm
Operating voltage| 3.0 – 3.4 V| Service life| 30000 – 50000 h
Solar panel| Charging cable
Voltage| 5 V| Connections| USB-C™ plug, USB-A plug
Type| Mono-Crystalline Silicone| Cable length| 30 cm
Work| 1.25 Wp| Weight| 10 g
Fig. 2.
Safety instructions
The user manual is part of the product and contains important information for correct use.
- Read the user manual completely and carefully before use.
- The user manual must be available for uncertainties and passing the product.
- Keep this user manual.
- Do not open the housing.
- Do not modify product and accessories.
- Do not short-circuit connectors and circuits. Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.
- Use product, product parts and accessories only in perfect condition.
- In case of questions, defects, mechanical da-mage, trouble and other problems, non-recover-able by the documentation, contact your dealer or producer.
- Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
- Secure packaging, small parts and insulation against accidental use.
Battery hazards
The batteries are not replaceable.
Batteries may be damaged and leak if not used for the intended purpose.
-
Leave leaked, deformed or corroded batteries in-side the product and dispose it by appropriate protectives.
-
Never throw batteries into a fire.
Extreme heat can lead to explosion and/or leakage of corrosive liquid. -
Do not deform or disassemble the battery. Mechanical damage can cause gaseous substances to escape, which can be highly irritating, flammable or toxic.
-
Do not immerse the battery in liquids.
There is a danger of: Explosion, fire, heat, smoke and/or gas. -
Do not operate the product in an explosive environment.
Blinding
-
Never look directly into the light source.
-
Do not aim the beam of the light into the eyes of other persons or animals.
The eyes can be damaged! -
Do not use in road traffic!
Description and function
Product
The product is a mobile auxiliary battery and is used to charge or operate small mobile devices. It has an integrated lithium polymer battery that can be char-ged both via USB power supply and via an integra-ted solar panel. In addition, the product can be used as a torch.
Scope of delivery
Outdoor Fast Charge Powerbank with Solar, Charging cable, User Manual
Operating Elements See Fig. 1.
- Protective cover
- LED status indicator
- Solar panel
- Torch
- Function button
- USB-A QC 3.0 socket
- USB-Câ„¢ socket
- Micro USB socket
- USB-A plug
- USB-Câ„¢ plug
Intended use
We do not permit using the device in other ways like described in chapter
“Description or Function“ and „Safety Instructions“. Not attending to these
regula-tions and safety instructions might cause fatal ac-cidents, injuries,
and damages to persons and pro-perty.
IP44: This product is protected against splash and contact with foreign
objects ≥ Ø1 mm.
Preparation
- Check the scope of delivery for completeness and integrity.
- Compare the specifications of all used devices and ensure compatibility.
Connection and operation
Switching the power bank on and off
- Press the function button 1x to switch on the power bank.
- Press the function button 2x to switch off the power bank.
The power bank turns on automatically when you connect a mobile device. The power bank switches off automatically after 30 seconds if no mobile de-vice is connected.
Charging the power bank
The power bank is supplied partially charged. Fully charge the power bank before using it for the first time!
- Open the protective cover.
- Connect the USB-C™ or Micro-USB socket of the power bank to a USB power source via a charging cable. This can either be a 230 V USB charging adapter, a 12/24 V car USB charger or the USB socket of a PC.
- Disconnect all cable connections after charging.
- Close the protective cover.
When LED 6 lights up red, the power bank is charging via the solar panel.
Charging a mobile device
-
Open the protective cover.
-
Connect your mobile device to the USB-C™ socket or one of the USB-A sockets. Your mobile device will start charging.
It is not recommended to charge multiple mobile devices at the same time via the power bank. If several devices are being charged at the same time, the Quick Charge function cannot be used. -
Disconnect all cable connections after charging.
-
Close the protective cover.
Switching the torch on and off
- Press the function button for 3 seconds to switch the torch on or off.
Checking the charging status See Fig. 2.
Briefly press the function button to display the battery status. If no LED
lights up despite pressing the function button, the power bank is complete-ly
empty.
During the charging process, LED 1-4 flash blue. LED 5 lights up green when
Quick Charge is active. LED 6 lights up red when the power bank is being
charged via the solar panel.
Maintenance, Care, Storage and Transportation
- Only use a dry and soft cloth for cleaning.
- Do not use detergents or chemicals.
- Charge the batteries every three months to ensure they maintain capacity when not in use for an extended period of time.
- Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
- Store cool and dry.
- Keep and use the original packaging for transport.
Disposal instructions
Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its com-ponents must be recycled or
disposed apart from each other. Otherwise contaminative and ha-zardous
substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispo-se electrical and electronic
devices to the producer, the dealer, or public collecting points at the end of
the devices lifetime for free. Particulars are regula-ted in national right.
The symbol on the product, in the user manual, or at the packaging alludes to
the-se terms. With this kind of waste separation, appli-cation, and waste
disposal of used devices you achieve an important share to environmental
protec-tion.
WEEE No: 82898622
Packaging
Packaging can be disposed of free of charge at the suitable collection points – paper be-longs in paper bins, plastics belong in yellow sacks and glass belongs in used glass bins. DE4535302615620
EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>