goobay 60344 LED Solar Camping Lamp with IR Remote Control User Manual

goobay 60344 LED Solar Camping Lamp with IR Remote Control

Specifications

Light colour

Rated Luminous flux

Colour temperature

| cool white 220 lm

6800 K

Luminous range| 5 m
Nominal life time| 10000 h
Dimmability| dimmable
Protection level| IP44
Operation temperature range| -10 °C ~ +50 °C
Housing material| ABS, PP
Housing colour| black, white, gold, red
Dimensions | Weight| Ø 13 x 5.7 mm | 221 g
USB cable
Connections| Micro-USB plug, USB-A plug
Cable length| 50 cm
Rechargeable battery
Specifications| 18650 Li-Ion, 3.7 V             , 2000 mAh, 7.4 Wh
Solar panel
Type| Polysilicon
Watt Peak| 5 Wp
Remote control
Sensor type| Infrared
Dimensions | Weight| 85 x 40 x 6 mm | 3 g
Max. detection range| 5 m
Battery for remote control (included in the scope of delivery)
Type | Quantity (pcs.)| Lithium, CR2025 | 1
Voltage | Capacity| 3.0 V            | 150 mAh

Safety instructions

In general

• The user manual is part of the product and contains important information for correct use.
• Read the user manual completely and carefully before use.
• The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.

Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.

• Use product, product parts and accessories only in perfect condition.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.

Not meant for children. The product is not a toy!

• Secure packaging, small parts and insulation against accidental use.
• Never look directly into the light source.
• Do not aim the beam of the light into the eyes of other persons, animals or reflective surfaces.

The eyes can be damaged!

• Do not use the product in road traffic!
• Do not touch the LED during and immediately after use.
• Avoid proximity to flammable surfaces and substances.
• Do not cover the product.
• Do not hang anything on the product.

Batteries

• The battery of the remote control is replaceable.
• Keep batteries out of the reach of children.
• The remote control is equipped with a lithium button cell. If swallowed, there is a risk of severe internalburns or even death.
• Seek immediate medical attention if you believe someone may have swallowed or otherwise ingested the battery.
• Never use batteries if they are dented, leaking or damaged.
• Remove leaking, deformed or corroded cells from the product and dispose of them using appropriate protective devices.
• If a battery has leaked, avoid contact with skin, eyes and mucous membranes. If necessary, rinse the affected areas with water and seek medical attention immediately.
• Do not deform, burn or disassemble batteries and never pierce them with a sharp object.
• Do not short-circuit batteries or immerse them in liquids.
• There is a risk of explosion, fire, heat, smoke and/or gas emission. The battery of the camping lamp is not replaceable.
• Leave leaked, deformed or corroded batteries inside the product and dispose it by appropriate protectives.
• Do not expose the battery to heat, such as sunlight or heat from heating, or fire.

Exposure to extreme heat may cause an explosion and/or leakage of corrosive liquids. Mechanical damage may result in gaseous substances that can be highly irritating, flammable or toxic.

Description and function

Product

This product is a battery-powered LED solar camping lamp that can be used as a stand lamp, hanging lamp and torch.

Scope of delivery

LED solar camping lamp with IR remote control, Micro USB cable, CR2025 button cell, User Manual.

Operating Elements

1. Hanging bracket
2. Solar panel
3. LED status indicator
4. Protective cap
5. Function button
6. LED light
7. USB-A socket
8. Micro USB socket
9. Remote control
10. USB-A plug
11. Micro USB plug

Intended use

This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use. We do not permit using the device in other ways like described in chapter “Description or Function“ and „Safety Instructions“. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property. IP44: This product is protected against splash and contact with foreign objects ≥ Ø1 mm.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

Commissioning

Remote control

1. Remove the contact protection tab from the remote control.
2. Use the buttons to select the corresponding function.
3. The range of the remote control is approximately 5 m.

Camping lamp

• Before using the LED camping lamp for the first time, charge it either via the solar panel or the Micro USB socket.
• When the light becomes dim, please charge the battery immediately to protect it from deep discharge and related damage.

Charging – solar panel

• To charge the LED camping lamp, place it in daylight with the solar panel (2) facing upwards.
• When the LED status indicator (3) flashes, the LED camping lamp is charging. It is fully charged when all four blue LED status indicators light up.

Charging – Micro USB socket

1. Open the protective cap (4).
2. Connect the Micro USB socket (8) of the LED camping lamp to a USB voltage source using the supplied charging cable.
3. This can be either a 230 V USB charging adapter with max. 5 V/1 A, a 12/24 V car USB charger or the USB socket of a PC.
4. Disconnect all cable connections after charging.
5. Close the protective cap.
6. When the LED status indicator (3) flashes, the LED camping lamp is charging.

Operation

Manual

1. Press the function button (5) once to start the LED camping lamp with continuous light. The lamp now has 100 % luminosity.
2. By pressing the function key repeatedly, you can switch to the following 5 modes: 50 % luminosity, flashing, red light, red SOS signal, off.

Switching on – Remote control

• With the remote control you can choose between the following 6 settings:
  • „ON“ = 100 % continuous light, „MODE1“ = 75 % continuous light,
  • „MODE2“ = 50 % continuous light, „MODE3“ = flashing, „SOS“ = red SOS signal,
  • „OFF“ = the LED camping light goes out.

Checking the charging status

• Press the function button (5) to display the battery status. If no LED lights up despite pressing the function button, the LED camping lamp is completely discharged. During the charging process, LED 1-4 flash blue. If all 4 LEDs light up without flashing, the LED camping lamp is 100 % charged.

Changing the battery of the remote control

If necessary, replace the empty battery with a new one of the same type. See chapter „Specifications“.

1. Grasp the battery compartment with your thumb and index finger.
2. Press the locking tab (A) flush against the battery compartment with your thumb.
3. Grasp the recessed grip (B) with the nail of your index finger.
4. Pull the battery compartment out of the remote control.
5. Remove the battery.
6. Dispose of the empty battery properly.
7. Please also read the „Disposal instructions“.
8. Insert a new battery of the same type into the battery compartment with the positive pole facing upwards.
9. Close the battery compartment as far as it will go.
10. The safety catch must click into place.

Maintenance, Care, Storage and Transportation

The product is maintenance-free.

NOTICE: Material damage.

• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Remove the batteries if they are not going to be used for a long time.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal instructions

Product

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment.

As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection. WEEE No: 82898622

Batteries

(Rechargeable) batteries must not be disposed of with household waste. Their components have to be supplied separately to the recycling or disposal, because toxic and dangerous ingredients can harm the environment if not disposed of sustainably. As a consumer, you are obliged to return them at the end of their service lives to the manufacturer, the sales outlet or established for this purpose, public collection points for free. Details regulates the respective country‘s law. The symbol on the product, the instruction manual and / or the packaging draws attention to those provisions. With this kind of material separation, recovery and disposal of waste (rechargeable) batteries you make an important contribution to protecting our environment. D-34000-1998-0099

Subject to change without notice

Goobay®

• by Wentronic GmbH Pillmannstraße 12
• 38112 Braunschweig Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>