SPACE 9-F3T1N48P Vertical Matrix Back Managers Chair Instruction Manual
- September 25, 2024
- SPACE
Table of Contents
SPACE 9-F3T1N48P Vertical Matrix Back Managers Chair
Product Information
Specifications
- Model Numbers: 639-F3T1N48P, 639-F3T1N48PHX, 639-T11N48P, 639-T11N48PHX
- Chair Type: Direction Chair with Vertical Matrix Back
FAQ
Question: How do I make a warranty claim?
Answer: Contact the Parts Department with your model number, proof of purchase, and a description of the problem to obtain return authorization.
Question: Can I use the chair for purposes other than its intended use?
Answer: No, please use the chair only for its intended purpose to ensure safety and longevity.
PART QTY
- Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
- Casters . . . . . . . . . . . . . . . . . . . . . . . . . 5
- Pneumatic Cylinder . . . . . . . . . . . . . . . . 1
- Seat Plate . . . . . . . . . . . . . . . . . . . . . . . 1
- Seat Cushion . . . . . . . . . . . . . . . . . . . . . 1
- Backrest . . . . . . . . . . . . . . . . . . . . . . . . 1
- Arms (7L & 7R) . . . . . . . . . . . . . . . . . . . 2
- Flat Washers . . . . . . . . . . . . . . . . . . . . . 6
- Arm Screws . . . . . . . . . . . . . . . . . . . . . . 6
- Seat Plate Screws . . . . . . . . . . . . . . . . 4
- Back Support Screws . . . . . . . . . . . . . . 3
- Back Support (pre-installed) . . . . . . . . . 1
- Allen Wrench . . . . . . . . . . . . . . . . . . . . 1
FEATURES
-
PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1). To lower seat height sit on chair and lift lever (1).
NOTE: It is normal for chair to slightly lower under body weight. -
BACK HEIGHT ADJUSTMENT
To adjust the height of the backrest lift upward. Once backrest reaches its highest position it returns to the bottom to be moved upward again. -
SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, lift lever (2) up.
Release lever (2) to lock desired seat position. -
2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an adjustment knob that will allow the user to change the tension of the tilting feature. Turn knob (3) clockwise to increase tension and counter-clockwise to decrease or ease the tension. To lock, return chair to the upright position and push lever (1) in. To unlock, pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob completely. -
ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (4) in to allow the arms to move up or down freely. Release the button (4) once the desired height is reached.
WARNING
- Use this product only one person at a time.
- Do not use this chair unless all bolts screws and knobs are securely tightened.
- Check that all bolts screws and knobs are tight every three months or as needed.
- Do not overturn back tilt knob when decreasing tension.
- Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation.
- Do not use chair as a stepladder.
- Use this chair for its intended purpose only.
- Use mild detergent only for cleaning.
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
- Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
- 3 Years on upholstery fabric and foam against wear and deterioration.
- Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, and description of the problem and obtain return authorization. At it’s option Office Star Products will:
- (a) Supply compatible components of current manufacture.
- (b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by Office Star Products.
- *All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty-hour work week by persons weighing 275 lbs. or less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829’s with self-adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five-year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
- All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
- Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts.department@officestar.net, by Fax 1-909-930-5629, or toll-free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. – 3:30 pm. Pacific Time.
ASSEMBLY INSTRUCTIONS
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
-
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
-
STEP 2 Attach Arms (7L & 7R) to Seat Cushion (5) using three Flat Washers (8) and three Arm Screws (9) for each arm.
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13). -
STEP 3 Attach Seat Plate (4) to Seat Cushion (5) with arrow pointing towards the front of the chair, secure Seat Plate (4) using four Seat Plate
Screws (10). FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13). -
STEP 4 Attach Back Support (12) to rear of Seat Plate (4) using three Back Support Screws (11).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13). -
STEP 5 Insert Pneumatic Cylinder (3) into Base (1), place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
© Office Star Products May, 2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>