Space Invaders Frenzy Instruction Manual

: May 15, 2024
: Space Invaders

Table of Contents

Space Invaders Frenzy
Product Information
Specifications:
- Product Usage Instructions
Setup:
Startup Game:
Diagnostics and Adjustments:
- Frequently Asked Questions (FAQ)
Q: How should I handle components of the game?
Q: What should I do before transporting the game?
Q: How do I avoid electrical shocks while using the game?

Space Invaders Frenzy

“`html

Product Information

Specifications:

Product Name: Space Invaders FrenzyTM
Model Number: 040-00057-01 Rev. B

Product Usage Instructions

Setup:

Unpack Materials: Ensure all components are
unpacked carefully and inspect for any damage.

Check Electrical Settings: Verify the correct
electrical settings before powering on the game.

LED Display Quick Setup Guide: Follow the guide
to set up the LED display properly.

Startup Game:

Power up the game following the instructions provided in the
manual to start playing.

Diagnostics and Adjustments:

Basic Functional Test on Initial Power Up:
Perform a basic test to ensure all functions are working
correctly.

Test Menus: Access the test menus to make any
necessary adjustments or diagnostics.

Frequently Asked Questions (FAQ)

Q: How should I handle components of the game?

A: Components are sensitive to handling and ESD events. Handle
them with care and follow proper ESD procedures when servicing.

Q: What should I do before transporting the game?

A: Ensure all 4 quadrants are removed from the LED display
before moving it to prevent damage to the frame. Use appropriate
care when transporting the cabinet or LED display.

Q: How do I avoid electrical shocks while using the game?

A: Always turn off and unplug the unit before servicing. Ensure
proper grounding and do not use cheater plugs. Use caution when
servicing electronic components.

“`

Space Invaders FrenzyTM Operators Manual

040-00057-01 Rev. B

Space Invaders FrenzyTM
Table of Contents
Safety ……………………………………………………………………………………………………………………………………………….. 5 Operation………………………………………………………………………………………………………………………………………. 5 Transporting ………………………………………………………………………………………………………………………………….. 5 Handling Components …………………………………………………………………………………………………………………….. 5 Disconnect Power …………………………………………………………………………………………………………………………… 5 Grounding ……………………………………………………………………………………………………………………………………… 5 Electrical Shocks …………………………………………………………………………………………………………………………….. 5 Power Cord ……………………………………………………………………………………………………………………………………. 5 Surge Suppressor ……………………………………………………………………………………………………………………………. 5 Water and Other Liquid Sources ………………………………………………………………………………………………………. 6 Connectors…………………………………………………………………………………………………………………………………….. 6 Computer ………………………………………………………………………………………………………………………………………. 6 Hazard to Epileptics ………………………………………………………………………………………………………………………… 6 Manual ………………………………………………………………………………………………………………………………………….. 6 Specifications …………………………………………………………………………………………………………………………………. 6
Product Specifications ………………………………………………………………………………………………………………………… 7 Electrical Power ……………………………………………………………………………………………………………………………… 7 Dimensions ……………………………………………………………………………………………………………………………………. 7 Operating Temperature……………………………………………………………………………………………………………………7 Operating Humidity ………………………………………………………………………………………………………………………… 7
Fuse Replacement Guide …………………………………………………………………………………………………………………….. 7 Setup ………………………………………………………………………………………………………………………………………………… 9
Unpack Materials…………………………………………………………………………………………………………………………….9 Check Electrical Settings ………………………………………………………………………………………………………………….. 9 LED Display Quick Setup Guide………………………………………………………………………………………………………….9
Required Tools…………………………………………………………………………………………………………………………..10 Parts Note…………………………………………………………………………………………………………………………………10 Frame Components (Not to Scale) ………………………………………………………………………………………………. 10 Quadrants and Marquee Components (Not to Scale)……………………………………………………………………..12 Network Cable Connections …………………………………………………………………………………………………………… 14 Cabinet Assembly Setup Diagram…………………………………………………………………………………………………….15 Cabinet Assembly Instructions ……………………………………………………………………………………………………….. 16

3 | Page

Space Invaders FrenzyTM
Startup Game………………………………………………………………………………………………………………………………..16 Diagnostics and Adjustments………………………………………………………………………………………………………………17
Basic Functional Test on Initial Power Up ………………………………………………………………………………………… 17 Test Menus ………………………………………………………………………………………………………………………………….. 18
Main Menu ………………………………………………………………………………………………………………………………. 18 Diagnostics……………………………………………………………………………………………………………………………….. 18 Pricing Adjustments……………………………………………………………………………………………………………………19 Payout Settings Menu ……………………………………………………………………………………………………………….. 20 Audits………………………………………………………………………………………………………………………………………. 21 Utilities…………………………………………………………………………………………………………………………………….. 21 Volume ……………………………………………………………………………………………………………………………………. 22 Advertising ……………………………………………………………………………………………………………………………….. 23 Advertising Menu User Guide…………………………………………………………………………………………………………. 23 Advertising Image Troubleshooting………………………………………………………………………………………………….25 Keys to Maximizing Your Earning and Collections ……………………………………………………………………………… 26 Card Swipe Locations………………………………………………………………………………………………………………….26 E-Ticket Locations ……………………………………………………………………………………………………………………… 26 Coin Locations ………………………………………………………………………………………………………………………….. 26 2 Point Ticket Locations………………………………………………………………………………………………………………26 More Tickets = More Fun = Better Earnings…………………………………………………………………………………..26 PC Hardware ……………………………………………………………………………………………………………………………………. 27 Fujitsu Mini BIOS……………………………………………………………………………………………………………………………27 Dell Inspiron 3050 BIOS …………………………………………………………………………………………………………………. 28 PC Hard Drive Recovery …………………………………………………………………………………………………………………. 29 Troubleshooting ……………………………………………………………………………………………………………………………….. 30 Technical Support …………………………………………………………………………………………………………………………….. 35 Electrical and Mechanical Illustrations ………………………………………………………………………………………………… 37

4 | Page

Space Invaders FrenzyTM
Safety
Operation
Before operating game, read this manual. Failure to properly install and operate this game could result in malfunction or accident. Operate the game in accordance with the manual.
Transporting
When moving the LED display, ensure all 4 quadrants have been removed. Never attempt to move the LED display with the quadrants still attached, as this can cause the frame to bend and warp. Always use appropriate care when moving or transporting either the cabinet or LED display.
Handling Components
Many components are extremely sensitive to handling, environmental and Electrostatic Discharge (ESD) events–especially the computer. Do not handle it roughly. Before servicing, call your distributor and inquire about the PC warranty. Use proper ESD procedures when servicing. Protect components from harmful environmental conditions, such as extreme temperatures, excessive moisture or other damaging effects.
Disconnect Power
Always turn the power off and unplug the unit before servicing or making adjustments unless otherwise instructed. Installing or repairing components while power is on can damage the components and void the warranty.
Grounding
Avoid electrical shock. Do not plug in AC power until you have inspected and properly grounded the unit. Only plug into a grounded, three-wire outlet. Do not use a “cheater” plug or cut off the ground pin on the line cord.
Electrical Shocks
There is no isolation transformer in the cabinet. Disconnect AC power before servicing. However, be aware that lethal voltages can remain in the electronic components even when AC power is disconnected. Use extreme caution when servicing. Verify that there is a working ground connection. If the unit sustains water damage, cease using it immediately and unplug AC power.
Power Cord
If the power cord is damaged or lost, replace it with an identical cord as supplied by the manufacturer or an authorized service agent.
Surge Suppressor
It is recommended that you plug your game’s power cord into a surge suppressor to help protect from power surges that may damage sensitive electronic components.

5 | Page

Space Invaders FrenzyTM
Water and Other Liquid Sources
Do not install game near sprinkler or other water jet sources. Do not use water jet to clean game. Keep minimum clearance behind game and wall for proper ventilation but also prevent access of liquid from spills and sprays from entering ventilation holes.
Connectors
When servicing machine, ensure all connectors mate properly. If connectors do not slip in easily, do not force them. Connectors are often keyed and only connect one way. Check for correct orientation.
Computer
The computer contains sensitive components, including a hard drive. Do not handle it roughly. Call your distributor before servicing its internal components. Ask about warranty information as it relates to the PC. Do not turn the PC power switch on or off. It should remain permanently in the ON position. Cycle AC power on or off with the cabinet power switch. A dongle has been inserted into one of the USB ports. This is required for game play. Do not remove the dongle except for troubleshooting purposes.
Hazard to Epileptics
A small portion of the population has an epileptic condition that may cause seizures. Affected persons experience seizures while watching some television pictures or playing certain video games. People who have not had seizures may still have an undetected epileptic condition. If anyone in your family has experienced epilepsy symptoms (seizures or loss of awareness), consult your physician before using video games. While children play video games, a parent should observe. Be alert to the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation or convulsions. If you or your child experiences these symptoms, discontinue use immediately and consult your physician.
Manual
Keep this manual available and ready for use. If the game fails to function properly, turn off the machine and unplug the AC line cord. Contact your local distributor. Your warranty, when applicable, lasts 60 days from your purchase date. You may not reproduce this document or any of its contents without written authorization from Raw Thrills, Inc.
Specifications
For reasons such as performance, this product’s specifications may change without notice. Federal patent, copyright and other intellectual property laws protect the content, devices and design of the game and its equipment.

6 | Page

Space Invaders FrenzyTM

Product Specifications
Electrical Power
United States, International and Japan Operating AC Current: 5/2.5 Amps Voltage: 115/230 ~ VAC 50/60Hz Inrush AC Current: 5 Amps
Dimensions
Seat Pedestal
Height: 55.0″ (1.40 meters) Width: 43.5″ (1.10 meters) Depth: 32.5″ (0.83 meters)
Control Cabinet
Height: 46.0″ (1.17 meters) Width: 43.5″ (1.10 meters) Depth: 29.0″ (0.74 meters)
Display
Height: 117.0″ (2.97 meters) Width: 68.0″ (1.73 meters) Depth: 35.5″ (0.90 meters)

Operating Temperature
50° F to 104° F (10° C to 40° C)
Operating Humidity
Must not exceed 95% relative humidity

Fuse Replacement Guide
NOTE: FOR CONTINUED PROTECTION AGAINST FIRE AND ELECTRICAL DAMAGE, USE ONLY SPECIFIED FUSE TYPE AND VALUE.
RIO:
5VDC = 3A 250V SLO-BLO 12VDC = 5A 250V SLO-BLO
Game Lighting:
5A 250V SLO-BLO (x4)
LED Display Panel:
5A 250V SLO-BLO (x9 PER QUADRANT)

7 | Page

Space Invaders FrenzyTM

8 | Page

Space Invaders FrenzyTM
Setup
Unpack Materials
1. Place the shipping crates on a flat, stable surface. 2. Cut the banding straps and remove the cardboard lids. 3. Lift off the large cardboard containers surrounding the cabinets (control & pedestal) and monitor
assemblies and remove any shipping cleats. 4. Remove the coin door key from the coin return slot. 5. Open the top coin door. 6. Locate the keys for the back door and the cash box door. 7. Open the cash box door and remove the cash box. 8. Check for shipping damage to the following:
· Marquee and monitor · Cabinet decals 9. Check the AC line cord for visible signs of damage. Pay particular attention to the plug and line cord insulation.
Check Electrical Settings
1. Verify the voltage in the nearest AC outlet. 2. Verify the AC outlet ground connection is present and working. 3. Open the service door of the control cabinet assembly 4. Locate the 24V power supply and verify the voltage selector switch is set to the correct AC voltage.
Please note: some 24V power supplies are universal and do not have a voltage selector switch.
LED Display Quick Setup Guide
Important Note: This manual is accompanied by a separate document: “LED Display (P7.62 Version) Full Assembly and Service Procedure”. Please refer to this document when installing, servicing and troubleshooting the LED display. It is a more comprehensive guide and provides more detail than the quick setup guide listed below. Keep this and other documentation for future reference. Additional information regarding the latest version of software and documents can also be found on our website: www.rawthrills.com

9 | Page

Space Invaders FrenzyTM
Listed below is a step by step process to assemble the P7.62 based LED Display for Space Invaders Frenzy. For additional assistance, reference the full Assembly and Service Procedure included with the game. 2 people are required to do the assembly. Ladders are recommended when assembling the top quadrants of the LED screen. Refer to the “LED Display (P7.62 Version) Full Assembly and Service Procedure” for details.
Required Tools
M6 Allen Key, #2 Phillips Screwdriver, and a Level
Parts Note
All parts are labeled with decals. Refer to these decals when assembling the screen.
Frame Components (Not to Scale)

1 Left Base Assembly (x1)

2 Right Base Assembly (x1)

3 Left Upper Tube Assembly (x1)

4 Right Upper Tube Assembly (x1)

5 Cross Tube (x4)

6 M8x16mm Socket Head Cap Screw (x24)

10 | Page

Space Invaders FrenzyTM

11 | Page

Space Invaders FrenzyTM
Quadrants and Marquee Components (Not to Scale)
7 Marquee Assembly (x1)

8 4×9 Display Quadrant (x2)

9 3×9 Display Quadrant (x2)

10 Center Planar Bracket (x1)

11 Side Planar Bracket (x4)

12 M5x8mm Phillips Head Screws (x8)

13 M8x16mm Socket Head Cap Screw (x16)

12 | Page

Space Invaders FrenzyTM

(Note- Install screen quadrants individually, starting with the bottom quadrants)

13 | Page

Space Invaders FrenzyTM
Network Cable Connections

14 | Page

Space Invaders FrenzyTM
Cabinet Assembly Setup Diagram

(Recommended minimum 20″ distance between the LED display and the cabinet assembly)

15 | Page

Space Invaders FrenzyTM
Cabinet Assembly Instructions
1. Place control (control) cabinet in front of LED display.
2. Locate the two connecting brackets and the following hardware: (6) black tamper proof Torx machine screws, ¼-20 thread, 1-1/2″ long, and (6) ¼” black split lock washers, and (6) ¼” black flat washers. Using a T-27 bit, attach these connecting brackets to the inside of each cabinet side as shown in the cabinet assembly setup diagram.
3. Move Seat Pedestal assembly in front of control cabinet and connect harness. Locate the following hardware: (6) black tamper proof Torx machine screws, ¼-20 thread, 2″ long, and (6) ¼” black split lock washers, and (6) ¼” black flat washers. Push cabinet halves (seat and control section) completely together and be sure not to pinch wire harness. Using T-27 bit, connect the two cabinet halves with the hardware as shown in the cabinet assembly setup diagram. (Note: Leg levelers may need to be adjusted to account for uneven surfaces.)
4. Locate the following hardware: (2) black tamper proof Torx machine screws, ¼-20 thread, 1-1/2″ long, and (2) ¼” black split lock washers, and (2) ¼” black flat washers. Install screws through Seat Pedestal floor to center connecting bracket.
5. Move the completed cabinet assembly into the desired position in front of the display. Raw Thrills recommends a minimum distance of 20 inches between the LED display and the cabinet assembly. Once positioned, lower all (8) leg levelers.
6. Connect the network CAT 5 cable between the back of the completed cabinet at the terminal near the on/off switch and the back of the LED wall assembly. Use supplied D-channel sleeve and carpet tape to properly dress the network cable on the floor.
Startup Game
1. Plug in line cord to AC outlet.
2. Turn the power switch to ON.
3. Verify game display, sound, lights and controls are operating normally. If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.

16 | Page

Space Invaders FrenzyTM
Diagnostics and Adjustments
The Service Button Panel has four buttons, three of which can navigate the menu system. The start buttons and gun triggers can also advance through test menu screens.

TEST SERVICE

Volume UP
Volume DOWN

Navigating the Test Menu

Button TEST/BACK (Not in Test Menu)
TEST/BACK (In Test Menu) SERVICE (On Main Menu) SERVICE (Not on Main Menu)
VOLUME UP VOLUME DOWN
Start Buttons

Action Enters Test Menu Selects Highlighted Option Exits Test Menu Cancels Selection
Move Up Move Down Selects Highlighted Option

An on-screen message acknowledges changes or when you exit a selection without making a change.
Basic Functional Test on Initial Power Up
See the Diagnostic Section for further information.
1. Enter the Switch Test menu and verify all switches function. 2. Enter the Sound Test menu and verify the audio works and is not distorted. 3. Enter the Coin Meter Test menu and verify the operation of the coin meter. 4. Enter the Cabinet Lamps Test menu and verify that all cabinet lights work correctly. 5. Enter the Watchdog Test menu, which reboots the game. 6. Upon a successful reboot, you are ready to adjust pricing, volume and other functions found in the
Adjustments, Audits, and Diagnostics section.

17 | Page

Space Invaders FrenzyTM
Test Menus Main Menu
Main Menu Description- Choose from all available operator settings and menus here. You can use the test menu bracket and volume buttons to navigate. The guns, gun triggers, and start buttons also are available to use for easier navigation through these menus.
MAIN MENU
DIAGNOSTICS PRICING ADJUSTMENTS PAYOUT SETTINGS AUDITS UTILITIES VOLUME ADVERTISING
EXIT

Diagnostics
This menu allows all game functions to be verified or diagnosed. You can improve collections by periodically verifying proper game function and operation. This includes periodic CRC checks to verify that software has not been corrupted or reporting an error.

DIAGNOSTICS
CRC CHECK SWITCH TEST GUN LIGHTS TEST SOUND TEST COIN METER TEST TICKET TEST WATCHDONG TEST CALIBRATE GUNS

· CRC Check: Checks for errors in the game’s files · Switch Test: Test all the switches on the game · Cabinet Lights Test: Test all cabinet lighting · Gun Lights Test: Test gun lighting · Coin Meter Test: Tests functionality of “hard meter” · Ticket Test: Tests functionality of ticket mech(s) · Watchdog Test: Tests Functionality of watchdog (If
working properly, game will reboot).
· Calibrate Guns: Calibrate the aim of the guns

EXIT

18 | Page

Space Invaders FrenzyTM

Pricing Adjustments
This allows customization of coin values, currency denominations, bill pulse, and swipe value.
Pricing Adjustments: Coins Active (Default)

PRICING ADJUSTMENT
(COINS)
FREE PLAY CURRENCY TYPE CURRENCY INPUT COIN VALUE COINS TO PLAY
EXIT

· Free Play: No coins or swipes needed to play.
· Currency Type: Choose between: Cash, Tokens, or Card Swipes
· Coin Value: Money value of a coin. This is a very important setting and impacts payout. Default value is $0.25.
· Coins to Play: Number of coins per credit.

Pricing Adjustments: Swipes Active
PRICING ADJUSTMENT
(SWIPES)
FREE PLAY CURRENCY TYPE CURRENCY INPUT SWIPE VALUE SWIPES TO PLAY
EXIT

· Free Play: No coins or swipes needed to play.
· Currency Type: Choose between: Cash, Tokens, or Card Swipes
· Coin Value: Money value of a swipe. This is a very important setting and impacts payout. Default value is $1.00.
· Swipes to Play: Number of swipes per credit.

19 | Page

Space Invaders FrenzyTM
Payout Settings Menu
This menu allows for customization of target compensation, payout percentage, ticket value, E-Ticket support (Paperless Tickets), and Jackpot compensation.
PAYOUT SETTINGS
PAYOUT PERCENT TICKET VALUE JACKPOT TWO POINT TICKETS EXPRESS PAYOUT E-TICKET MODE AMUSEMENT ONLY EXTRA LIVES (available in Amusement Only)
EXIT
· Payout Percent: Set your targeted payout percentage. Game defaults to 40% which is the recommended setting. IMPORTANT NOTE- Space Invaders Frenzy has a dynamic targeted payout system in place but it is a skill based redemption game. There will be some slight volatility and variation in payout among different skill level players.
· Ticket Value: Set the value of your tickets. Default value: $0.01 and is the recommended setting. · Jackpot: Set the value of the game’s jackpot award up to 1000 tickets. Default value is 500. · Two Point Tickets: When set to ON, this setting allows a single ticket dispensed to be worth 2 points
in the game. · Express Payout- when set to ON, allows for tickets to be dispensed as tickets are earned
(recommended setting). When set to OFF, ticket payout is dispensed after the completion of the current game. · E Ticket Mode- Raw Thrills supports the use of paperless tickets or “E-TICKETS” with our new “ETicket Mode”. If you are using digital tickets via a card based system like Embed, Intercard, Semnox or equivalent system, you will need to activate E-Ticket Mode. This mode provides E-Ticket support to a 2-player simultaneous play experience like Space Invaders Frenzy. It splits the credits and Eticket payout to the Player 1 and Player 2 sides of the game to two separate card swipers. Each player’s payout and credits will be properly divided to the corresponding player’s card. · Amusement Only- This mode is a unique action arcade experience and is different than the video redemption mode. While the controls and general gameplay remain the same, “Amusement Only” has many various waves, power ups, bonus stages, and a continue feature with gameplay tailored towards a longer playing experience. The player plays only for points and to complete the game after all 50 stages are cleared. There are no tickets awarded during this mode. To turn on “Amusement Mode”, you can access it in the “Payout Settings” menu. This mode is perfect for nonticket redemption locations and provides a more traditional longer play action arcade experience. · Extra Lives- This is an adjustment only available and accessible when Amusement Only is set to ON. Operator can adjust the number of lives given per credit.

20 | Page

Space Invaders FrenzyTM
Audits
Audit screens help assess game performance, find intermittent problems, decide whether to adjust game difficulty and free game award and help maximize game earnings.
AUDITS
SYSTEM AUDITS 1 SYSTEM AUDITS 2 SYSTEM AUDITS 3 SYSTEM AUDITS 4 COIN AUDITS GAME AUDITS
EXIT
· System Audits- Logged information including boots, resets, game times, and more · Coin Audits- Tracks income related information, coin slot usage, dollar bill usage, and more · Game Audits- Tracks the gameplay habits of your customers. How many bonus ships hit, average
scores, number of jackpots won, payout percentage, and more.
Utilities
Utilities is a miscellaneous menu of operator tools and settings
UTILITIES
RESETS COPY TO USB LEADERBOARD SETTINGS SCREEN BRIGHTNESS TRADESHOW MODE ATTRACT MUSIC MODE
EXIT

21 | Page

Space Invaders FrenzyTM
(Utilities Menu Continued from Previous Page)
· Resets- All operator resets are available in this menu. Coins, tickets, audits, adjustments, high score leaderboards, are all accessible here. You can also factory reset the game from this menu which will restore all settings in the game to their original factory settings.
· Copy to USB- Allows you to upload your audits to an easy to read text file (.TXT) on a USB flash drive · Leaderboard Settings- Allows you to turn high score leaderboards on and off. ON is the default and
recommended setting. · Screen Brightness- Adjust the brightness of your Space Invaders Frenzy screen. There are 6 levels of
brightness to choose from. 6 is the default value and is the recommended setting. · Tradeshow Mode- Turn this mode on when operating on a trade show, sales floor, or demo floor.
The game runs on free play and also simulates ticket payouts without a ticket error appearing on the screen. · Attract Music Mode- This allows you to set how frequently you want the volume to play during the attract mode. Choose from “ON”, “Occasionally”, and “OFF”.
Volume
Volume
GAME VOLUME: 13/20 ATTRACT VOLUME: 7/20 CREDIT VOLUME: 17/20 MINIMUM VOLUME: 4/20
EXIT
· Game Volume- Adjusts the volume level during gameplay · Attract Volume- Adjusts the volume during the attract mode sequences · Credit Volume- Adjusts the volume level of the credit chime only (Independent setting of game and
attract volume) · Minimum Volume- Adjusts the minimum floor the volume can be lowered

22 | Page

Space Invaders FrenzyTM

Advertising
Space Invaders Frenzy has an advertising feature that allows the operator to upload photos which will be displayed during the attract mode of the game.

ADVERTISING

AD SLOT 1 AD SLOT 2 AD SLOT 3 AD LENGTH

10 SEC

EXIT

Desired Resolution: 224 x 288 Formats: TGA, PNG, JPG

· Ad Slot 1: First of 3 available advertising file slots · Ad Slot 2: Second of 3 available advertising file slots · Ad Slot 3: Third of 3 available advertising file slots · Ad Length: Adjusts the time duration that the advertising image appears
Advertising Menu User Guide
1. Identify and select advertising image files you would like to have displayed on the screen during the game’s attract mode. On your personal computer or laptop, upload these advertising images to a USB flash drive. Image files should be .TGA, .PNG, or .JPG format type.

Note The resolution of images should be 224 x 288 pixels. (224 x 288) Larger resolution files or different file types can cause an error or won’t appear correctly on your Space Invaders Frenzy screen. (To be able to clearly read text and images, we recommend making your image 72 DPI, 224 x 288 resolution) Game can hold up to 3 images.

23 | Page

Space Invaders FrenzyTM
2. After you have your images picked out, sized, and copied to your USB flash drive, you are now ready to upload the images into Space Invaders Frenzy. Open the coin door and find the service bracket that has the test menu and service buttons. On this bracket, you will find a USB slot to insert your flash drive. Important Make sure to only insert your flash drive while the game is in attract mode. Never insert a flash drive while the game is booting up, or in the Test Menu.

(Above- Image of the USB slot above the test menu buttons) 3. Once your USB flash drive is inserted into the USB slot on the service control panel, you can then press the “TEST” button to access the main menu.
4. Select “ADVERTISING” from the main menu to access the upload feature. From this menu, you can then select an ad slot for your image.

ADVERTISING

AD SLOT 1 AD SLOT 2 AD SLOT 3 AD LENGTH

10 SEC

EXIT

Desired Resolution: 224 x 288 Formats: TGA, PNG, JPG

AD SLOT
LOAD IMAGE AD BRIGHTNESS PREVIEW IMAGE CLEAR IMAGE
EXIT

24 | Page

Space Invaders FrenzyTM
5. After you are in the “AD SLOT MENU” you can select “LOAD IMAGE” which generates a list of the file names of the image files that are on your USB drive. Navigate to the file name you would like to upload and select it. (See image below)
SELECT A FILE TO LOAD
(Your Flash Drive Files Listed Here)

6. When you select the image you would like to upload, you will be presented with a preview of the image, which you can accept or decline. If you accept the image, you will be taken back to “AD SLOT MENU” which will allow you to load a different image, adjust the ad brightness, preview the image again, clear your image or exit the menu.
Please Note: If you have lighter colors or lots of white areas in your advertisement, we recommend that you adjust the ad brightness to a lower level. The default ad brightness is 6 but many advertisements have a better appearance at 3-5 brightness.

Advertising Image Troubleshooting

Error
USB DEVICE NOT CONNECTED
INCORRECT RESOLUTION DETECTED
NO IMAGES ON FLASH DRIVE IN AD SELECT SCREEN
FILES MISSING FROM AD SELECT SCREEN WHEN THE AD SELECT SCREEN HAS MORE THAN 1 PAGE

Solution
Check your USB drive to ensure it is properly connected. Also, check to make sure your USB drive can be read on other devices. Ensure the coin door USB connection cable to the PC inside the cabinet did
not become disconnected or dislodged. Please check the resolution of the image that you are trying to
upload. Recommended image size is 224 x 288 pixels Check to make sure your files have properly loaded on to your flash
drive and ensure that they are in the proper .PNG, .TGA, or .JPG format.
Please remove some files on your flash drive and check to make sure you do not have more than 10 files on the main USB flash drive folder

25 | Page

Space Invaders FrenzyTM

Keys to Maximizing Your Earning and Collections
Card Swipe Locations
· Make Sure Your Game is Set to Swipes Mode: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Pricing Adjustments” from the menu. 3. Select “Currency Input” from the menu. 4. Select “Swipes” from the menu. 5. Set “Swipe Value” to the currency equivalent of your swipe, or the payout will be incorrect. THIS SETTING IS EXTREMELY IMPORTANT! (Example: If the card swipe is worth $1.50 in your card system, set the swipe value to $1.50 as well)
E-Ticket Locations
· Make Sure Your Game is Set to E-Ticket Mode: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Payout Settings” from the menu. 3. Select “E Ticket Mode” and set to “On”
IMPORTANT NOTE: You must have two card swipers for E-Ticket mode to work. One for Player 1 Gun and one for Player 2 Gun.
Coin Locations
· Make Sure Your Pricing & Coin Value are Correct: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Pricing Adjustments” from the menu. 3. Select “Coins to Play” and set the desired amount of coins per game of Space Invaders FrenzyTM. 4. After setting the coins per play, set “Coin Value” to the currency equivalent of your coin, or the payout will be incorrect. THIS SETTING IS EXTREMELY IMPORTANT! (Example: If your coin is worth $0.25, set “Coin Value” to $0.25 as well)
2 Point Ticket Locations
· Make Sure the 2 Point Ticket Setting is Activated: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Payout Settings” from the menu. 3. Select “Two Point Tickets” and set to “On”. (Your tickets are now worth 2Pts each)
IMPORTANT NOTE: Only use this setting if your tickets are worth 2 points per ticket or the payout will be incorrect.
More Tickets = More Fun = Better Earnings
· We recommend using the default payout setting of 40% to maximize earning potential and fun factor for the players. To set the “Payout Percentage”: 1. Hold the Test Button for 2 seconds to enter the Test Menu. 2. Select “Payout Adjustments” from the menu. 3. Select “Payout Percent” and adjust to desired amount.
IMPORTANT NOTE: Space Invaders FrenzyTM will dynamically adjust to your desired payout setting.

26 | Page

Space Invaders FrenzyTM
PC Hardware
Your Space Invaders FrenzyTM game may ship with either a DELL INSPIRON 3050 computer or a Fujitsu IMP3313-S4-4G-HD Mini PC computer (“Fujitsu Mini PC”). The Dell Inspiron 3050 computer is square in shape has a “Dell” logo on it while the Fujitsu computer is rectangular in shape and has no logo. Listed below are the BIOS settings for each computer. NOTICE Both the DELL INSPIRON 3050 and FUJITSU MINI PC ship with correct BIOS settings. Making changes to the BIOS different from the description below may adversely affect game functions.

(Above- Dell Inspiron 3050)
Fujitsu Mini BIOS

(Above- Fujitsu Mini PC)

To Access BIOS Settings: With the computer powered off, plug a USB keyboard into an open USB slot, hold `F2′ key and turn the computer on. Continue holding the F2 key until the BIOS Setup screen appears.
Note: All settings that are not listed should remain their default values
Advanced + Graphics Configuration – Internal Graphics ……………………[Enabled] – Primary Display…………………………….[IGD] – IGD Memory ……………………………. [512M] Power – Power Failure Recover …………………… [Always ON] Boot – Prefer USB Boot………………………………….[Enabled] Note: After exiting BIOS settings screen, power- cycle the cabinet by using the cabinets main power switch.

27 | Page

Space Invaders FrenzyTM

Dell Inspiron 3050 BIOS

To Access BIOS Settings: With the computer powered off, plug a USB keyboard into an open USB slot, hold F12′ key and turn the computer on. Continue holding the F12 key until a menu with a blue background appears. From the menu, selectBIOS Setup’

Main · Nothing

Advanced – Intel® SpeedStepTM …………………………….[Enabled] – Virtualization ……………………………………..[Enabled] – Integrated NIC ……………………………………[Enabled] – SATA Operation………………………………………[AHCI] – Adapter Warnings ………………………………[Enabled]

+ Miscellaneous Device – Nothing

+ Power Options – Wake Up by Integrated LAN …… [Disabled] – AC Recovery…………………………..[Enabled] – Auto Power On …………………….. [Disabled] Security – Nothing

Boot
–
Exit
–

Boot List Option ………………………………….. [Legacy] File Browser Add Boot Option File Browser Del Boot Option Secure Boot ……………………………………… [Disabled] Load Legacy Option Rom……………………..[Enabled] 1st Boot Priority …………………. [USB Storage Device
Nothing

Note: After exiting BIOS settings screen, power-cycle the cabinet by using the cabinets main power switch.

28 | Page

Space Invaders FrenzyTM
PC Hard Drive Recovery
Symptoms requiring PC hard drive recovery include · File Test reports bad or missing files. · Game fails to finish loading during startup. · After resetting the AC power, an error is reported. · Erratic Game or Attract Mode. · The following screen:
WARNING!
CRC File Missing! Reinstall Software! File Damaged! Reinstall Software! File Missing! Reinstall Software!

The only way to repair corrupt files is to reinstall the software as described below:
Computer The computer contains sensitive components. Do not handle roughly. Call your distributor before servicing its internal components. Ask about warranty information as it relates to the PC. Do not use the PC on/off switch. Turn AC power on or off with the cabinet power switch. Steps to Re-install the software: (NO DVD Restoration. USB Thumb Drive is used on the Dell Inspiron 3050 PC or Fujitsu Mini)
1. With game and PC on, verify that the RIO board has power. If not, see Troubleshooting. 2. Open the coin door 3. Insert the recovery USB thumb drive (included in your game) into the USB port on the Test button
bracket inside the coin door. 4. Turn cabinet power switch to OFF. Wait 30 seconds. 5. Turn cabinet power switch to ON. 6. Select the Space Invaders Frenzy restore version from the menu and follow on screen instructions 7. If recovery does not begin, check to ensure USB Drive is inserted correctly and is not damaged. 8. Initial software loading may take several minutes. Check progress periodically.
Do not interrupt power or reset the game during recovery. 9. When software has been loaded, a message indicates that restore is complete. When instructed to
remove USB Drive, wait 15 seconds to remove the drive from the PC. 10. Turn cabinet power switch off and then turn the cabinet on again. Your game will now be restored.

29 | Page

Space Invaders FrenzyTM

Troubleshooting
Warning: Review safety chapter before making any adjustments to game.

Problem

Possible Cause
Game not plugged in.

Solution
Plug game into AC outlet.

Game will not power up.

Game not turned on.
Game fuse is blown.
No power to receptacle.
PC BIOS set incorrectly. Flash Drive Installer is left connected to PC. Advertising USB flash drive left connected to PC.

Turn on main power switch.
Check and replace fuse. See Specification section for fuse values. Test AC outlet and plug game into powered outlet.
See BIOS Settings section.
Disconnect Flash Drive Installer and power cycle the game. Remove USB flash drive and power cycle the game.

Faulty micro switch.

Buttons do not work.

Faulty wiring.

Faulty PCB.

Replace the micro switch on the button and re-test. Verify that the wires are connected to the correct spades on the micro switch. Disconnect the cabinet from AC power. Verify that all wires are firmly connected to each button and the PCB. Verify that no wires are frayed or improperly shorting to ground. Verify that wires are connected to the correct spades on the micro switches. Ensure all connections to PCB are secure. Replace PCB if faulty.

Neither buttons nor audio work.

PCB connected to faulty USB port (boot message may indicate not detected)

To test a USB port, turn off the game, disconnect the device from the port, and then connect the game dongle to the port. Reboot the game. A No Dongle message indicates the port is bad. If the game starts, the port is working. After the test, reconnect all devices to the correct USB ports and reboot.

30 | Page

Space Invaders FrenzyTM

Problem

Possible Cause
Bad connection. Volume set too low.
Faulty wiring.

No sound or bad sound.

Blown speakers.

Reversed wires.

Faulty PCB.

Constant low audio hum.

Faulty power supply. Open ground.

Game does not load. PC Drive test reports “bad” or
“missing” files. Game fails to finish loading. After resetting, game still reports
an error. Erratic game mode or attract
mode. WARNING! Data files Corrupted. (Game Operation May Become Unstable.) Use “Test” Switch to Enter Test Mode and Run “File Test.”

PC hard drive failure.

Solution
Check connection to speakers. Use VOL UP button on Test panel to raise volume Verify all wires are firmly connected to the speakers, PCB, and green computer audio port. Verify that each wire is connected to the correct port and no wires are frayed or improperly shorting to ground. Remove the grill and inspect each speaker for visible damage. Run the Sound Test from System Tests in the Operator Menu to verify each speaker is working. A weak or low muffled sound is a sign of reversed speaker wires. Check for reversed wires on each speaker. To verify audio is working at the computer, connect stereo headphones to the green computer audio port.
Check external DC supply and the PC supply. Check all ground wires in cabinet. Ensure AC wall outlet is properly grounded
Recover hard drive. See Flash Installer Document or
visit www.rawthrills.com for latest software version download.

31 | Page

Space Invaders FrenzyTM

Problem
Game Resets

Possible Cause
Bad file.

Solution
Run Flash Installer.

Coin meter does not click during test.

No pulse to meter.
Faulty meter. Blown fuse(s) on PCB

Check wiring from meter to RIO board. Replace coin meter. Replace 12vdc 5A fuse(s) on PCB.

Incorrect setting in Pricing Adjustments.

Improper number of credits given when coins or bills are
inserted.

Faulty wiring.

Faulty coin mech.

Adjust pricing settings.
Disconnect cabinet from AC power. Verify wires are firmly connected to coin mech and bill validator and ground wires are properly connected. Verify no wires are frayed or shorting to ground. Verify coin mech is not jammed. Ensure coin mech is properly aligned and latched to coin door.

Exits Test Mode every 3 seconds. Test button stuck in ON position.

Slide or toggle button off after Test Menu appears

No Video

PC not turned on.
Video cable not secure.
Network cable missing or not secure between cabinet and LED screen.
Network cable missing or not secure between LED controller card and RJ45 Network jack. Faulty RJ45 pass-through Network jack.

Turn PC power switch on. Ensure IEC cable tightly plugged in. Trace cable back to source to ensure continuity. Check and secure DVI connector to LED controller card. Check and secure DVI or HDMI connector to PC. Connect network cable between RJ45 Network jack on the back of the cabinet and quadrant #1 of the LED screen. Power cycle the game after connecting the network cable. With the cabinet AC power off and the line cord removed, check the Ethernet cable between the LED controller card (Port “U”) and the RJ45 Network jack on the inside of the cabinet.
Replace jack.

32 | Page

Space Invaders FrenzyTM

Problem
Dongle Not Present

Possible Cause
Dongle missing or disconnected. Faulty USB port.

Solution
Find dongle cable and reseat in USB port. Insert dongle cable in different USB port.

Connect RIO Board or RIO Board USB cable disconnected.

Missing.

No Power to RIO board.

Check USB connection from PC to RIO board. Check for proper voltage (+5V, +12V) at RIO P1 connector.

Defective single pixel.

Defective LED module.

· Tap gently on defective pixel. · Replace LED module.

Several defective pixels, but not all in same row or same column.

Defective LED module.

· Replace LED module.

Entire row or column of defective pixels.

Faulty data transmission.

Defective LED module.

· Check ribbon cable between malfunctioning module and module to the left (from the back).
· Check/replace module to the left (from the back).
· If module is left-most in quadrant (from the back): o Check ribbon cable between module and LED display controller. o Check quadrant LED display controller.
· Replace LED module.

33 | Page

Space Invaders FrenzyTM

Problem

Possible Cause

Faulty data transmission. Entire module malfunctioning.
Bad power. Defective LED module.

Solution
· Check ribbon cable between malfunctioning module and module to the left (from the back).
· Check/replace module to the left (from the back).
· If module is left-most in quadrant (from the back): o Check ribbon cable between module and LED display controller. o Check quadrant LED display controller.
· Check power connection to LED module.
· Check quadrant fuse block for blown fuse.
· Replace LED module.

Entire row of modules in quadrant malfunctioning.

Faulty data transmission.

Bad power.

Screen Note 1- Space Invaders Frenzy uses over 65,000 LEDs on its giant screen. It is normal for a few LEDs to fail over the course of operating the game. This will not affect normal operation or viewing of the game and most will not be noticeable to the eye.
Screen Note 2- This manual is accompanied by a separate document: “LED Display (P7.62 Version) Full Assembly and Service Procedure”. Please refer to this document when servicing and troubleshooting the LED display. Additional information regarding the latest version of software and documents can also be found on our website: www.rawthrills.com

34 | Page

Space Invaders FrenzyTM
Technical Support
Contact your distributor for support.
For a list of authorized distributors near you, check the Raw Thrills website at: www.rawthrills.com

35 | Page

Space Invaders FrenzyTM

36 | Page

Space Invaders FrenzyTM Electrical and Mechanical Illustrations

NOTE: PLEASE CHECK FOR THE LATEST VERSION OF GAME SOFTWARE AND MANUAL AT WWW. RAWTHRILLS.COM

37 | Page

Space Invaders FrenzyTM

38 | Page

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

Space_Invaders_Control_Assy

Control Cabinet Assembly

600-01457-01

JP55″ Bracket Connect

McMaster-Carr – 97416A119

Black-Oxide Steel SAE Flat Washer, 1/4″ Screw Size, 0.281″ ID, 0.625″ OD

McMaster-Carr – 93711A500

Black-Oxide 18-8 Stainless Steel Split Lock Washer for 1/4″ Socket Head Screws, 0.26″ ID, 14
0.363″ OD

Special Order Hardware (not available at McMaster-Carr)

Alloy Steel Tamper-Resistant Torx Rounded Head Screws, 1/4″-20 Thread Size, 2″ Long

Space_Invaders_Pedestal_Assy

Pedestal Assembly

McMaster-Carr – 96075A231

Alloy Steel Tamper-Resistant Torx Rounded Head Screws, 1/4″-20 Thread Size, 1-1/2″ Long

P7.62_LED_Wall_Assy

Complete LED Wall Assembly inc. 12″ Extensions (w/ P7.62 Panels & Marquee)

2 7

6 NOT SHOWN: > CABLES/HARNESSING > CABLE MANAGEMENT WIRE CHANNEL
– 5′ LONG W/ ADHESIVE TAPE

Space Invaders Frenzy Assembly

17 25 26 27 28

10 12

NOT SHOWN: > HARDWARE > 500-00131-01 – RGB LED Strip Reel
– 2X 120CM / 72 LEDs (installed in #10)

Space Invaders Frenzy Control Cabinet Assembly
(BOM on next page)

Space Invaders Frenzy – Control Cabinet Assembly: BOM

ITEM NO.

PART NUMBER

9 601-00779-01

10 603-00718-01 (47.5 in)

DESCRIPTION Main Cabinet LED T-Molding Extrusion – 47.5″

11 600-01939-01

Flanged LED T-Molding Clip

12 600-01938-01

LED T-Molding Clip

13 Space_Invaders-Ray_Gun_Assy

Space Invaders Gun Assembly (w/ Ray Gun Tip Assembly)

14 600-01913-01 15 600-01912-01 16 600-01936-01 17 600-01937-01 18 600-01486-01 19 702-00015-01

Gun Gusset Bracket L Gun Gusset Bracket R
Gun Plate Rear Gun Plate Front Dash Gun Cover Plate Large Round RED Pushbutton (Suzo-Happ)

20 702-00019-01

Large Round BLUE Pushbutton (Suzo-Happ)

21 600-01944-01 22 AC_Plate_Sub-Assy

Cabinet Seam Plate AC Power Plate Assembly

23 800-00001-00 24 820-00012-00

120mm Wire Fan Guard Cooling Fan (standard size): 12VDC, 3W, 80CFM

25 Space_Invaders_RIO_Assy

RIO Assembly w/ Mounting Plate

26 500-00187-01

Switching Power Supply: 156W, 24V, 6.5A (Mean Well RS-150-24)

27 500-00193-01

Switching Power Supply: 320.4W, 12V, 26.7A, PFC (Mean Well RSP-320-12)

28 800-00040-01

Solid State Relay (Magnecraft 6210DSX-1)

29 850-00024-01

Fujitsu PC (IMP-3313-S4-4G-HD)

30 380-00002-01 31 800-00043-01

LED Control Card Ticket Dispenser Door Assembly (Suzo-Happ)

32 800-00005-01

Mid-Width Coin Door Assembly (Suzo-Happ)

33 2-1-10-00-00-000

5.25″, 8 Ohm Full Range Speaker (Goldwood)

34 600-01464-01

JP55″ Speaker Grill

35 600-01458-01 36 Space_Invaders_Back_Door_Assy

JP55″ Center Bracket Connect Back Door Sub-Assembly

QTY. 1 2 2 2 2 1 1 2 2 2 1 1 1 1 2 1 1 1
1
1 1 1 2 1 2 2 1 1

ITEM NO. PART NUMBER

37 600-01754-01 38 703W-00/08

McMaster-Carr 90272A146

40 T9-611P-6

41 1832.3312

42 602690

DESCRIPTION AC Electronics Plate AC Receptacle: 250V, 15A (Qualtek) Steel Phillips Rounded Head Screws, 6-32 Thread Size, 3/8″ Long Thermal Circuit Breaker: 240VAC, 6A, Snap-in, Fuseholder, 1-Pole (Schurter) Rocker Switch (DPST): 250VAC, 20A
(Marquardt) Cat5e Keystone Coupler: Black,
RJ45F/RJ45F (CNAweb)

QTY. 1 1 2
1
1
1

Space Invaders Frenzy AC Power Plate Assembly

ITEM NO. PART NUMBER 43 600-01914-01 44 500-00040-01

McMaster-Carr 90316A192

46 500-00194-01

47 520-00024-01

McMaster-Carr 90272A106

DESCRIPTION RIO Mounting Plate
RIO PCB 18-8 Stainless Steel Hex Washer Head Slotted Machine Screw, 8-32
Thread, 3/8″ Length 5V, 5A Switching Regulator PCB
(12V input) Aliens / Terminator Deluxe Gun
Kickboard Steel Phillips Rounded Head Screws, 4-40 Thread Size, 1/4″ Long

QTY. 1 1 10
1
4 16

43 44
45

Space Invaders Frenzy RIO Assembly w/ Mounting Plate

46 47 48

54 53
49

ITEM NO. PART NUMBER

49 601-00780-01

50 600-00043-01

McMaster-Carr 90054A196

52 150-00001-00

53 800-00001-00

McMaster-Carr 90272A201

McMaster-Carr 90126A009

McMaster-Carr 90631A009

DESCRIPTION Back Door
Lock Retainer Plate Flanged Hex Head Screws for Sheet Metal, Zinc-
Plated Steel, Number 8 Size, 5/8″ Long
Standard Door Lock Assembly (for 3/4″ Panels)
120mm Wire Fan Guard Steel Phillips Rounded Head Screws, 8-32 Thread
Size, 1-1/4″ Long Zinc-Plated Steel SAE Washer for Number 8 Screw
Size, 0.188″ ID, 0.438″ OD Low-Strength Steel Nylon-Insert Locknut, Zinc-
Plated, 8-32 Thread Size

QTY. 1 1 3 1 2 8
8
8

55 56

Space Invaders Frenzy Back Door Sub-Assembly

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

57 601-00781-01

Seat Cabinet

58 600-01915-01

Seat Mount Bracket

McMaster-Carr 97416A119

McMaster-Carr 93711A500

Black-Oxide Steel SAE Flat Washer, 1/4″ Screw Size, 0.281″ ID, 0.625″ OD

Black-Oxide 18-8 Stainless Steel Split

Lock Washer for 1/4″ Socket Head

Screws, 0.26″ ID, 0.363″ OD

McMaster-Carr 96075A231

Alloy Steel Tamper-Resistant Torx Rounded Head Screws, 1/4″-20 Thread 10
Size, 1-1/2″ Long

Space_InvadersSeat Assy

Seat Assembly

59 60

58 63

McMaster-Carr 96765A145

McMaster-Carr 93711A600

Black-Oxide 18-8 Stainless Steel Washer for 5/16″ Screw Size, 0.344″ ID, 4
0.75″ OD

Black-Oxide 18-8 Stainless Steel Split

Lock Washer for 5/16″ Socket Head

Screws, 0.322″ ID, 0.457″ OD

64 65 70

McMaster-Carr 92965A581

McMaster-Carr 92141A030

McMaster-Carr 91102A030

Black-Oxide Grade 5 Steel Hex Head

Screws, Medium-Strength, 5/16″-18

Thread Size, 3/4″ Long

18-8 Stainless Steel Washer for 5/16″ Screw Size, 0.344″ ID, 0.75″ OD

Zinc-Plated Steel Split Lock Washer for 5/16″ Screw Size, 0.322″ ID, 0.583″ OD

Medium-Strength Grade 5 Steel Hex

McMaster-Carr 92865A587

Head Screw, Zinc-Plated, 5/16″-18 Thread Size, 1-1/2″ Long, Fully

Threaded

Space_Invaders_Rear _Seat_LED_Cap_Assy

Rear Seat LED Cap Assembly

66
67 68

70 601-00783-01

McMaster-Carr 97416A113

McMaster-Carr 95638A201

Seat Access Panel

Black-Oxide Steel SAE Flat Washer, Number 8 Screw Size, 0.188″ ID, 0.438″ 8
OD

Tamper-Resistant Torx Rounded Head

Screws for Sheet Metal, 18-8 Stainless Steel, Number 8 Size, 1-1/4″ Long,

PAINT BLACK

Space Invaders Frenzy

Pedestal Assembly

77 82 83 84

76 75 74
73

ITEM NO. PART NUMBER 73 603-00523-01 74 600-00105-01 75 600-00620-01

McMaster-Carr 95638A197

77 Seatback LED Assy

78 807-00003-00

McMaster-Carr 90054A196

80 Woofer LED Assy

81 600-00106-01

82 606-01261-01 83 600-01840-01

McMaster-Carr 97416A113

85 500-00065-01

86 603-00540-01

DESCRIPTION Plastic Seat – Red Seat Headrest Speaker Grill Middle Seat Plate Tamper-Resistant Torx Rounded Head Screws for Sheet Metal, 18-8 Stainless Steel, Number 8 Size, 3/4″ Long, PAINT BLACK White LEDs w/ Foam (500-00093-01 – 35CM / 21 LEDs) & Plastic LED Extrusion (603-00762-01 – 16″) 6.5″ Woofer, 8 Ohm (Goldwood) Flanged Hex Head Screws for Sheet Metal, ZincPlated Steel, Number 8 Size, 5/8″ Long ROB Side Emitting LEDs (500-00219-01 – 70CM / 63 LEDs) & Plastic LED Extrusion (603-00762-01 – 28″)
Woofer Grill Seatback Translite Seatback Clear Overlay Black-Oxide Steel SAE Flat Washer, Number 8 Screw Size, 0.188″ ID, 0.438″ OD Red LED Puck Light w/ Black Face PCB LED Spotlight Lens – Red Tint

QTY. 1 2 1
24
2 1 4
1 1 1 1 6 2 2

Space Invaders Frenzy Seat Assembly

93 94 88
89

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

87 601-00782-01

LED Cap Panel

88 603-00718-01 (20.5 in) LED-T-Molding Extrusion – 20.5″

89 600-01744-01

LED Cap Bracket

Tamper-Resistant Screw for Sheet

McMaster-Carr 95638A194

Metal, Pin-in-Torx, 18-8 Stainless Steel, Button Head, Number 8

Size, 1/2″ Long, PAINT BLACK

91 603-00805-01

LED Cap Lens

McMaster-Carr 97416A113

Black-Oxide Steel SAE Flat

Washer, Number 8 Screw Size,

0.188″ ID, 0.438″ OD

Space_InvadersRear Seat_LED_Assy

Rear Seat Light Assembly

McMaster-Carr 90054A194

Flanged Hex Head Screws for

Sheet Metal, Zinc-Plated Steel,

Number 8 Size, 1/2″ Long

NOT SHOWN: > 500-00131-01 – RGB LED Strip Reel
– 2X 50CM / 30 LEDs (installed in #88)

Space Invaders Frenzy Rear Seat LED Cap Assembly

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

95 603-00806-01

LED Cap Back

500-00162-01 (40 CM)

White LED Strip Reel w/ Foam Tape: 40CM / 24 LEDs

Space Invaders Frenzy Rear Seat Light Assembly

96 NOT SHOWN: > 6X Wire Ties

3 19 18
16 9 15
7
11

REV.

DESCRIPTION

DATE

A RELEASED B REVISED

10/18/14 1/9/15

C NO CHANGE THIS SHEET 12/14/16

ITEM NO.

PART NUMBER

DESCRIPTION

QTY.

UPPER VACFORM ASSEMBLY 1

SHAKER ASSEMBLY

GRIP ASSEMBLY

4 600-01422-01

PIN PLATE

5 600-01423-01

COVER BRACKET

18 17

6 600-01495-01 7 600-01411-01

FRONT VACFORM BRACKET 1

GRIP PLATE WELDMENT

8 600-01420-01 9 600-01491-01

LARGE GEAR

POT BRACKET

10 MMC 96075A211 1/4-20 X 1/2″ BLK TP SCREW 18

11 MMC 96075A183 10-32 X 3/8″ BLK TP SCREW 10

12 MMC 90273A827 10-32 X 3/8″ FLAT HEAD SCREW 6

13 MMC 91251A337 10-32 X 5/16″ CAP SCREW

14 MMC 6384K369

3/4″ FLANGED BEARING

15 MMC 90126A036

3/4″ WASHER

16 MMC 91342A240

3/4″ LOCKNUT

CABLE CLAMP

18 600-01567-01

SMALL POT GEAR

19 HAPP 50-2670-01

POT – 5K

LOWER MECH ASSEMBLY

TOP ASSEMBLY

NOTES: 1) ALL SCREWS SHOULD BE INSTALLED WITH BLUE LOCTITE 242 or 243. 2) THE 3/4″ LOCKNUT (16) IS TIGHTENED UNTIL THE TOP IS FLUSH
WITH THE TOP OF THE TUBE IN THE LOWER MECH ASSEMBLY (21).

RAW THRILLS INC.

TITLE: GUN MAIN ASSEMBLY

TOL: .X ±.030 .XX ±.015 .XXX ±.005
HOLES: +.002/-.000 ANGLES: ±0.5°
SHEET 1 of 1

MATERIAL:
FINISH: SEE NOTES PART NO.

REV
C

19
6 20
12 11
22 NOTE POSITION OF 13 ORIENTATION HOLE IN PINCH GUARD
29 26 27
28
25
23

15 14

1 21 18
4 5
17 2
7

REV.

DESCRIPTION

DATE

A RELEASED

10/18/14

B REVISED

1/9/15

C CHANGED TO MOLDED LOWER 12/14/16

COVER

ITEM NO.

PART NUMBER

1 MMC 92313A532

2 MMC 96075A211

3 603-00756-01

4 600-01425-01

5 MMC 6384K344

6 600-01418-01

7 600-01424-01

8 MMC 90652A029

9 MMC 90108A413

10 HAPP 96-4907-00

11 600-01567-01

12 HAPP 50-2670-01

13 600-01426-01

14 MMC 95229A480

15 MMC 90566A220

17 MMC 91257A552

18 600-01417-01

19 600-01496-01

20
21 MMC 947633A170
22 MMC 90675A009 23 600-01577-01 25 600-01739-01 26 600-01738-01 27 999-00021-01

28 999-00017-01

DESCRIPTION
1/4-20 x 3/16″ SET SCREW 1/4-20 X 1/2″ BLK TP SCREW
LOWER VACFORM ROCKER BRACKET 3/8″ FLANGED BEARING TUBE STOP BUMPER – 5/8″ OD
SIDE PIN 1/4-20 THIN LOCKNUT
1/4-20 WASHER SEGMENT GEAR
POT GEAR POT – 5K LOWER TUBE WELDMENT 3/8″ WASHER 3/8″ THIN LOCKNUT 1/4-20 x 2 1/2 HEX HEAD – GRADE
8 SHORT STOP BUMPER – 3/4″ OD LOWER VACFORM MOUNTING
BRACKET CABLE CLAMP RETAINING CLIP 8/32″ KEPS NUT
GUN ISOLATOR
BOTTOM COVER – RIGHT BOTTOM COVER – LEFT 6-32 HEX LOCKNUT – BLACK 6-32 X 2.5″ PHILLIPS HEAD SCREW –
BLACK

QTY.
1 4 1 1 2 2 1 3 1 1 1 1 1 1 1
2
1
1
1 1 1 1 1 1 4
4

29 600-01419-01

PINCH COVER

LOWER MECH ASSEMBLY
NOTES: 1) ALL SCREWS SHOULD BE INSTALLED WITH BLUE LOCTITE 242 or 243. 2) PEEL AND STICK GUN ISOLATOR (#23) TO BOTTOM OF
LOWER TUBE WELDMENT (#14)

RAW THRILLS INC.

TITLE: GUN MAIN ASSEMBLY

TOL: .X ±.030 .XX ±.015 .XXX ±.005
HOLES: +.002/-.000 ANGLES: ±0.5°
SHEET 1 of 1

MATERIAL:
FINISH: SEE NOTES PART NO.

REV
C

ITEM NO.

PART NUMBER

1 600-01576-01 2 600-01412-01 3 HAPP FL11629 4 600-01413-01 5 600-01414-01 6 MMC 91375A535
7 680-00214-01

8 608-00210-01

9 HAPP #95-0637-00

10 MMC 93298A109

DESCRIPTION
COIL MOUNT BRACKET COIL BRACKET COIL COIL ROD COIL WEIGHT
1/4-20 x 3/8″ SET SCREW BLUE DAMPER PAD
COIL SPRING COIL SLEEVE 10-32 FLANGED LOCKNUT

QTY.
4 1 2 1 1 1 2
2 2 8

3 9
1

REV.

DESCRIPTION

A RELEASED

B REVISED

C NO CHANGE THIS SHEET

DATE 10/18/14
1/9/15 12/14/16

5 4

6 2

PEEL AND STICK DAMPER PAD WITH CENTER HOLE CONCENTRIC TO COIL BRACKET

10
SHAKER ASSEMBLY
NOTES: 1) SET SCREW AND LOCKNUTS SHOULD BE INSTALLED WITH RED LOCTITE 262.

RAW THRILLS INC.

TITLE:
GUN MAIN ASSEMBLY

TOL: .X ±.030 .XX ±.015 .XXX ±.005
HOLES: +.002/-.000 ANGLES: ±0.5°
SHEET 1 of 1

MATERIAL:
FINISH: SEE NOTES PART NO.

REV
C

ITEM NO.

PART NUMBER

DESCRIPTION

608-00224-01 GREEN BUBBLE BALL

600-01922-01 GREEN GUN ACRYLIC – SMALL

600-01922-01 GREEN GUN ACRYLIC – MEDIUM

600-01922-01 GREEN GUN ACRYLIC – LARGE

600-01923-01 BLACK GUN DISCS – SMALL

600-01923-01 BLACK GUN DISCS – MEDIUM

600-01923-01 BLACK GUN DISCS – LARGE

500-00223-01 GUN TIP PCB

600-01924-01 GUN TIP BRACKET

10 MMC 90107A029 WASHER

11 MMC 90145A431 1/16″ DIA X 2.5″ LONG ANTI-ROTATION PIN

12 MMC 91287A256 M6 X 90MM STAINLESS STEEL HEX BOLT

603-00755-01 UPPER VACFORM ASSEMBLY

606-01247-01 UPPER LEFT DECAL

606-01249-01 LOWER LEFT DECAL

606-01246-01 UPPER RIGHT DECAL

606-01248-01 LOWER RIGHT DECAL

18 MMC 96075A211 1/4-20 X .5″ BLACK TAMPERPROOF SCREW

QTY
1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 2

16 17 13

18 8

REV.

DESCRIPTION

A RELEASED

DATE 11/8/16

15 12 11 10
9

NOTES: 1) APPLY LOCTITE RED 271 TO HEX BOLT (ITEM 12) THREADS TO SECURE BUBBLE BALL (ITEM 1) 2) APPLY A RAW THRILLS APPROVED ADHESIVE TO THE END OF PIN (ITEM 11) AND INSERT IT INTO SMALL BLACK GUN DISC (ITEM #5)

RAW THRILLS INC.

TITLE:
SPACE INVADERS GUN TIP ASSY

TOL: .X ±.030 .XX ±.015 .XXX ±.005
HOLES: +.002/-.000 ANGLES: ±0.5°
SHEET 1 of 1

MATERIAL:
SEE NOTES
FINISH: SEE NOTES PART NO.

REV
A

REV.

DESCRIPTION

A RELEASED

DATE 1/15/15

INSTALL SEGMENT GEAR AFTER POT IS ALIGNED FOR EASIER ACCESS TO GEAR SET SCREW

DETAIL A SCALE 1 : 1

ALIGN FLAT ON POT DOWNWARD AND POINTING TOWARD CENTER OF SEGMENT GEAR

INSTALL 1/16″ (.063″) APART

INSTALL WITH GEAR INSTALLED AND POT FLAT POINTING TOWARD HANDLES

UP AND DOWN POT ALIGNMENT

LEFT TO RIGHT POT ALIGNMENT

RAW THRILLS INC.

TITLE:
POT ALIGNMENT DRAWING

TOL: .X ±.030 .XX ±.015 .XXX ±.005
HOLES: +.002/-.000 ANGLES: ±0.5°
SHEET 1 of 1

MATERIAL:
SEE NOTES
FINISH: SEE NOTES PART NO.

REV
A

2
10 12

3 7 5 4

REV.

DESCRIPTION

A RELEASED

DATE
11/17/10

11 8

ITEM NO.

RAW PART NUMBER

HAPP NUMBER

608-00201-01 95-1294-00

DESCRIPTION GRIP, LEFT HALF

QTY. 1

608-00204-01 95-1295-00

TRIGGER, RED

608-00203-01 95-1439-00 LARGE THUMB BUTTON 1

608-00205-01 95-1315-00 SHAFT, TRIGGER

608-00216-01 95-0259-00

SWITCH ASSY FOR THUMB SWITCH

608-00215-01 95-0028-00

SWITCH ASSY. FOR TRIGGER

608-00206-01 95-1297-00 SPRING, TORSION

608-00207-01 95-1298-00

SPRING, COMPRESSION

608-00202-01 95-1293-00 GRIP, RIGHT HALF

10 608-00218-01 96-0110-00 TRIGGER BUMPER

MMC 96075A147 43-0378-00

SCREW, #8-32 x 1 TP BLACK

12 MMC 86537A140 43-1124-00 HEX NUT #8-32 BLACK 1

GRIP ASSEMBLY

RAW THRILLS INC.

TITLE: GRIP ASSEMBLY

TOL: .X ±.030 .XX ±.015 .XXX ±.005
HOLES: +.002/-.000 ANGLES: ±0.5°
SHEET 1 of 1

MATERIAL:
FINISH: SEE NOTES PART NO.

REV
A

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

Space Invaders Frenzy

Product Information

Specifications:

Product Usage Instructions

Setup:

Startup Game:

Diagnostics and Adjustments:

Frequently Asked Questions (FAQ)

Q: How should I handle components of the game?

Q: What should I do before transporting the game?

Q: How do I avoid electrical shocks while using the game?

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Related Manuals