rock space ZC3-B Smart Protective Film Plotter User Manual

June 4, 2024
rock space

rock space logo

rock space ZC3-B Smart Protective Film Plotter

Product List

rock space ZC3-B Smart Protective Film Plotter 1

Appearance And Function

rock space ZC3-B Smart Protective Film Plotter 2

  1. Driver: Control the lateral movement of the blade kit
  2. Blade Kit: Cut protective film. See details 8, 9, 10, 11
  3. Platen Roller: Fix protecive film
  4. Blade Kit Clamp: Lock the knife handle to secure the blade kit
  5. QR Code Sticker: Scan to download App.
  6. Power Switch: Start device
  7. Power Interface: Connect to power
  8. Button: Press to eplace blade
  9. Blade Setting Knob: Rotate the knob to control the length of blade
  10. Blade Hosing: Fixed with the blade kit clamp
  11. Blade: Cut protective film

Instructions Install blade kit

rock space ZC3-B Smart Protective Film Plotter 4

power on

rock space ZC3-B Smart Protective Film Plotter 5

Connect the power cord to the adapter and socket. To ensure the normal operation of the device, please use 100-240volts AC power. Connect the adapter to the power interface of the device; Install the blade kit on the clamp to ensure it is fixed correctly. After connecting, press Power Switch to start the device.

Cut Film

Scan the QR code to download App (Only available for Android phones). To connect to Bluetooth after power on, you need to click [BLUETOOTH SETTING], and then
click the corresponding device model to automatically connect.

rock space ZC3-B Smart Protective Film Plotter 6

  1. Please prepare a protective film to be cut as shown in the figure. Confirm that the protective film is flat and complete, without bending, folding or missing layer.rock space ZC3-B Smart Protective Film Plotter 7
  2. Feed the front end of film to the bottom of platen roller and align the right side of film with the guide line. Please don’t place the film into the white area. Hold the film gently for 3 seconds until it enters automatically.rock space ZC3-B Smart Protective Film Plotter 8
  3. After the App starts normally, enters the home page.rock space ZC3-B Smart Protective Film Plotter 9
  4. Enter keywords in the search box to search for the product model you need to cut; select the appropriate protective film.rock space ZC3-B Smart Protective Film Plotter 10
  5. After checking that the protective film has been placed correctly, click [DONE] to start cutting.rock space ZC3-B Smart Protective Film Plotter 11
  6. After cutting, the protective film will be pushed out automatically. Take out the protective film and finish cuttingrock space ZC3-B Smart Protective Film Plotter 12

Activate Film Code

Scratch the coating on the film package then enter the identification code in the plotter [Consumables] and click [ADD] to add the film stock.

rock space ZC3-B Smart Protective Film Plotter 13

Attention

  • Shut down: Press and hold the power button for 2 seconds, the machine will automatically shut down after hearing a beep; Emergency stop: In the power-on state, press the power button once, the machine will terminate the film cutting and return to the initial state, and exit the film paper.
  • Please don’t move the driver manually when powered on to avoid damage to the machine.
  • Please don’t touch or bump the blade against anything hard for it is sharp and fragile
  • In order to ensure perfect cutting effect, it is suggested to replace the blade and the rubber strip every 500 times of cutting or 3 months of use. Please shut down the machine normally through the App, and please don’t unplug the power cable directly, for it may cause irreversible damage to the machine

Product Specification

  • Intput: 100-240V 2A 50-60Hz
  • Output: 24V 2.75A DC
  • Size: 420 183*130mm
  • Net Weight: 4.2kg
  • Working power: <40w
  • Bluetooth protocol Bluetooth:  4.2 BR/EDR-BLE+2.4FHz-Proprietar

Cautions

rock space ZC3-B Smart Protective Film Plotter 24

How to Install the Film

  1. Wipe the screen with the cleaning kit;
  2. Tear off the outer frame of the film from the tearing position at the upper right corner of the front of the film;
  3. Place the film flatly. Roll down the bottom layer to release the protective film.rock space ZC3-B Smart Protective Film Plotter 21
  4. Remove the holes of film and tear off the middle auxiliary strip; (Please fix the film with your index and middle fingers.)
  5. Place the film flatly on the screen and align the film to the phone precisely and press the auxiliary strip; (Be careful not to touch either end of the auxiliary strip)
  6. Lift the upper part of the film and then push forward slowly with a scratch card from the middle of the auxiliary strip.rock space ZC3-B Smart Protective Film Plotter 22
  7. Then lift the lower part of the film and pull back 2cm, then push forward slowly with a scratch card;
  8. Use a cleaning cloth to smooth the curved surface if necessary;
  9. Finally uncover the surface PET film and finish installing the film.rock space ZC3-B Smart Protective Film Plotter 23

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference vwill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals