Vesoi giro linea 150 Iconic Wall Lamp Installation Guide
- June 12, 2024
- Vesoi
Table of Contents
Vesoi giro linea 150 Iconic Wall Lamp
Product Information
The product is a Vesoi luminaire with the model name “giro linea 150/so – 200/so dim – orizzontale”. It is a lighting device that can be rotated horizontally and has three different positions. The product comes with general instructions for proper usage, including precautions such as connecting the base only to properly grounded outlets, avoiding sharp edges, and keeping the cable away from heat and water sources. The product also comes with a Vesoi European Guarantee for a period of two years from the purchase date.
Product Usage Instructions
- Connect the base of the luminaire only to properly grounded outlets. Verify that the voltage reported on the appliance is the same power supply voltage.
- Do not use accessories that are not recommended for the appliance as they can cause fires, electric shock, and personal injury.
- Do not place the cable near sharp edges. Fix it or let it hang and hold the cable away from heat and water sources.
- Avoid placing the appliance near or on hot surfaces such as heaters, hobs, gas stoves, or similar to avoid possible damage.
- Do not use the appliance if the cable or plug is damaged or if the appliance has fallen, is damaged, or has malfunctioned. If damaged, the appliance, the cable, and the plug can cause electrical discharges, burns, and fires.
If any fault of manufacture is discovered within two years from the purchasing date, contact the Vesoi retailer or authorized assistance center with a descriptive note of the lack and proof of purchase.
Features
VESOI EUROPEAN GUARANTEE
thank you for having chosen our product. we produce innovative illimination devices and original in the design, and we are always pedged to improve the quality and reliability of his products. for product installation, utilisation and maintence we invite you to read and follow carefully instructions below. the consumer is granted some rights law 99/44/ce as assimilated in the different national regulations, and this warranty does not derogate from those according to law.
- Vesoi guarantees that the product is lacking any fault of manufacture.
- This guarantee is valid exclusively in Europe.
- In case of any lack of manufacture you may ask for the guarantee enforcement on the product or on one of its components within two years from the purchasing date.
- the lack of conformity of the product is denounced within two months from its discovery;
- the lack is recognised as such by vesoi, a retailer or from an authorized assistance center.
What to do in case of faulty item:
- contact the vesoi retailer either the closer authorised assistance center (this information are available at the site www.vesoi.com);
- supply to above said operators a descriptive note of the lack;
- not forget to enclose the proof of purchase, or the invoice the fiscal ticket; in lack, we will not be able to allow reparation either to substitute the product in guarantee;
- shipped or delivered the defective product to the
- Retailer or to assistance Center, possibly in the original packaging or however using a suitable pack.
- Vesoi is reserving the right to not to operate the intervention in guarantee in absence of the proof of purchase and in case insufficient information are supplied or they are compatible with the product.
- Vesoi does not guarantee the integrity and / or the functioning of possible appliance bulbs included.
CAUTION
- If you were in doubt during the installation, contact an electrician and/or vesoi srl.
- disconnect the mains power switch every time you work on the appliance.
- install the luminaire only indoors, in a dry place
- the device carries no risk of photobiological emissions.
- does not coverit with any object: the temperatures that might develop may cause fire.
- do not exceed the maximum wattage of the bulbs indicated on the luminaire.
- the appliance cannot be changed or tampered; any modification can compromise the security. vesoi declines all responsibility for damages caused by incorrect respect of these instructions.
- for the cleaning of steel I brass
- we reccomend using a cotton cloth slightly moistenend (not wooll; are avoid products containing solvents and / or alcohol. please, re-cycle this paper.
general instructions
- connect the base only to properly grounded outlets. verify that the voltage reported on the appliance is the same power supply voltage;
- accessories use not recommended for the appliance can cause fires, electric shock and personal injury;
- do not place the cable with sharp edges, fix it or let it hang. hold the cable away from heat and water sources.
- to avoid possible damage, never place the appliance near or on hot surfaces such as heaters, hobs, gas stoves or similar.
- do not use the appliance if the cable or plug is damaged or if the appliance has fallen, is damaged or has malfunctioned. if damaged, the appliance, the cable, and the plug can cause discharges electrical, burns and fires.
assembly instructions
- fix fasteners not supplied to the ceiling as a template – fig. 1;
- connect cables from ceiling to terminal box C through H sheath included, as indicated:
- install A canopy with fasteners already fixed on the ceiling following the sequence – fig2
- fix to ceiling S and S1 – fig. 3 support with fasteners as indicated in the drawing;
- install F structure with supplied steel ropes, through the automatic holder B and through side hole support S – S1 – fig.3; fix automatic holder B with D;
- adjust the length of steel ropes with automatic holder S – S1 by exerting a slight pressure on P, taking care to hold the rope – fig. 4; Just release P to fix the luminaire length.
note: small length power cable adjustments from G screw-canopy.
the symbol indicates that the product must be disposed of separately from
urban waste.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>