MS22111 Monster Bluetooth Speaker
- June 6, 2024
- Monster
Table of Contents
MS22111 Monster Bluetooth Speaker
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
- Soundbar
- Power Adapter
- Optical cable
- AUX IN audio cable
- remote control
- AAA 1.5V battery*2
- Wall-mounted accessories
- Quick Start Guide & Warranty Letter
- Power on/off
- Mode switching
- Previous song
- Next song
- Pause/Play/Mute
- Mode switching
- 3D sound effect
- Bass enhanced sound
- Bluetooth key
- Volume up
- Volume down
- Mode switching
- Pause/Play/Mute
- Power on/off
- Previous song/Volume down
- Next song/Volume up
HDMI (ARC)
Connect to TV via HDMI (ARC)
HDMI connection supports digital audio and is the best choice for connecting
to a sound bar. If your TV supports HDMI ARC, you can use an HDMI cable (not
included) to listen to TV programs through the sound bar.
Connect to TV via optical cable
Optical connection supports digital audio, which can replace HDMI for audio
connection.
Connect the device via an analog audio cable
Use the supplied analog cable to connect the AUX-IN (RCA jack) on the sound
bar to the AUX-OUT/3.5mm jack on the portable device.
Power on/off
First connect the power adapter to the speaker and turn on the power. In
shutdown mode, press and hold the power on/off button for about 2 seconds to
turn on the speaker, and you can hear the power-on prompt tone. To turn off
the speaker, please press and hold the power on/off button again for about 2
seconds, and you can hear the power off prompt tone.
Note: When the power is turned on, the speaker will automatically turn
on.
Volume Control
Short press the Volume Button “+” or “-” to turn volume up or down.
Bluetooth function
- When the speaker is used for the first time and turned on, the speaker will automatically enter the pairing mode.
- If you have connected a Bluetooth device, press and hold the pause button for about 2seconds to disconnect and pair with other devices.
- If the Bluetooth device is not connected, the speaker will automatically enter the pairing mode.
When pairing, enable the Bluetooth function of the mobile phone, search for the “Monster” device for pairing and connection. After the connection is successful, you will hear a beep, and the white LED indicator will change from flashing to steady on.
Music
Play/Pause: In the music playback mode, press the MFB to play/pause music.
Track forward: In the music playback mode, press and hold the Volume “+”
Button for 2 seconds for next song. Track backward: In the music playback
mode, press and hold the Volume “-” Button for 2 seconds for previous song.
LED display guide
- bt-Bluetooth mode
- HI-HDMI ARC
- AU-AUX IN
- OP-Optics
- CO-coaxial
- OF-Power OFF
LED Indicator Guide
| Status | Voice/Tone |
|---|
Power On
| Power On Tone
Power Off
| ****
“Goodbye”
Pairing
| ****
“Discovering”
---|---
Bluetooth Connected
| ****
“Your device is connected”
Caution
Make sure that the sound output of the TV is set to “external speakers”.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. FCC RF
exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.FCC ID：2AVD2-MS22111
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>