Trudian TD-D3R36 4 Wire Analog Video Intercom Kit User Manual

TD-D3R36 4 Wire Analog Video Intercom Kit

“`html

Specifications:

• Video intercom system for villa users

• Features call, intercom, monitoring, and IC card access
  control

• Simple UI design for intuitive operations

• Night vision capability with infrared LED illumination

• Supports changing ringtones with 16 built-in options

• Can connect to 2 main outdoor stations and 1 indoor
  monitor

Product Usage Instructions:

1. Installation:

The video intercom should be installed at a height of 1.4 to 1.7
meters above the ground. Avoid harsh environments such as direct
sunlight, high temperatures, rain, snow, chemical corrosion,
excessive humidity, or excessive dust.

1.1 Installation Diagram:

Use screws or tape to fix the intercom on the wall, wooden
board, or door. Refer to the Outdoor Station Installation Diagram
for guidance.

1.2 Connecting Outdoor Station and Indoor Monitor:

Follow the Standard Connection Diagram to connect the outdoor
station and indoor monitor. Ensure proper power connection as per
the Access Control Power Connection Diagram.

2. Access Control Management:

• Master Management Card: Use this feature for
  master access control management.

• Adding User Cards: Add user cards for access
  control purposes.

• Deleting User Cards: Remove user cards when
  needed.

Frequently Asked Questions (FAQ):

Q: What is the recommended height for installing the video

intercom system?

A: The recommended height for installation is between 1.4 to 1.7
meters above the ground.

Q: How many main outdoor stations and indoor monitors can the

system connect to?

A: The system can connect to 2 main outdoor stations and 1
indoor monitor.

“`

4-Wire Analog Video Intercom Kit User Manual

4-Wire Analog Video Intercom Kit User Manual
Contents
1. Install wiring ………………………………………………………………………………………………1 1.1 Installa.on diagram…………………………………………………………………………………1 1.2 Connect the Outdoor sta.on and indoor Monitor …………………………………3
2. Indoor Monitor opera.on…………………………………………………………………………8 2.1 Intercom…………………………………………………………………………………………………..8 2.2 Call……………………………………………………………………………………………………………8 2.3 Unlocking …………………………………………………………………………………………………8 2.4 Monitoring……………………………………………………………………………………………….8 2.5 Do Not Disturb…………………………………………………………………………………………9 2.6 Audio and Video SeGngs ………………………………………………………………………..9
3. Access Control Management…………………………………………………………………. 10 3.1 Master Management Card …………………………………………………………………… 10 3.2 Adding User Cards………………………………………………………………………………… 10 3.3 Dele.ng User Cards ……………………………………………………………………………… 10

4-Wire Analog Video Intercom Kit User Manual
1.Install wiring
1.1 Installa-on diagram
The video intercom should be installed at a height of 1.4 to 1.7 meters above the ground. Try to avoid sun and rain. Use screws or tape to fix it on the wall, wooden board, door.
75°
Figure 1-1 Outdoor Sta0on Installa0on Diagram
1

4-Wire Analog Video Intercom Kit User Manual

Device Installation Diagram
Bracket for outdoor station Anchors

Screws

Anchors

Bottom screw
Hex wrench
Bracket for Screws indoor monitor

Figure 1-2 Device Installa0on Diagram
Avoiding harsh environments: The visitor (Outdoor StaBon) intercom system should not be installed in areas exposed to direct sunlight, high temperatures, rain, snow, chemical corrosion, excessive humidity, or excessive dust.
2

4-Wire Analog Video Intercom Kit User Manual
1.2 Connect the Outdoor sta-on and indoor Monitor
1 Set Outdoor StaBon to 1 Set Indoor Monitor Standard ConnecBon Diagram
Figure 1-3 Standard Connec0on Diagram 1 Set Outdoor Sta0on to 1 Set Indoor Monitor
3

4-Wire Analog Video Intercom Kit User Manual
Access Control Power ConnecBon Diagram
Figure 1-4 Access Control Power Connec0on Diagram Set Outdoor Sta0on to 1 Set Indoor Monitor
4

4-Wire Analog Video Intercom Kit User Manual
1 Set Outdoor StaBon to 2 Set Indoor Monitor Standard ConnecBon Diagram
Figure 1-5 Standard Connec0on Diagram 2 Set Outdoor Sta0on to 1 Set Indoor Monitor
5

4-Wire Analog Video Intercom Kit User Manual
Access Control Power ConnecBon Diagram
Figure 1-6 Access Control Power Connec0on Diagram Set Outdoor Sta0on to 2 Set Indoor Monitor
(1) Product IntroducBon The 4-Wire Villa Intercom System is a video intercom system developed for villa users. The system features call, intercom, monitoring, and IC card access control. It also uses a simple UI design for intuiBve operaBons such as changing ringtones and adjusBng volume.
6

4-Wire Analog Video Intercom Kit User Manual
(2) Features Video intercom, monitoring, and unlocking funcBons. IC card access control. Do-not-disturb mode. Night vision capability with infrared LED illuminaBon. Support for changing ringtones, with 16 built-in opBons for users to choose from. The system can connect to 2 main outdoor staBons and 1 indoor monitor.
7

4-Wire Analog Video Intercom Kit User Manual
2.Indoor Monitor opera4on
2.1 Intercom
When the outdoor staBon calls, the indoor doorbell rings, and the video image is displayed simultaneously. Press ” ” within 60 seconds for a
video call, or press ” ” for unlocking. The video call is limited to 120
seconds and will automaBcally hang up aXer 120 seconds. Press ” ” to forcibly end the call. If there is no response, the call will automaBcally hang up aXer 60 seconds.
2.2 Call
When a visitor presses the call buYon on the outdoor staBon, the indoor monitor will ring and display the image from the outdoor unit.
2.3 Unlocking
During communicaBon between the indoor monitor and the outdoor staBon (either being called, in intercom, or monitoring mode), press the ”
” buYon to open the corresponding electric lock.
2.4 Monitoring
In standby mode, press ” ” to observe the video from the outdoor
staBon. The monitoring is limited to 40 seconds. To unlock, press ” “.
8

4-Wire Analog Video Intercom Kit User Manual

Repeatedly pressing ” staBon video.

” will allow you to monitor the next outdoor

2.5 Do Not Disturb

In call or monitor mode, press and hold ” ” unBl you hear a beep, and
the LCD displays ” “. To cancel mute, press and hold ” ” for 3-5 seconds unBl you hear a double beep. An icon indicates mute is on; no icon indicates normal status.
2.6 Audio and Video SeEngs

In call or monitoring mode, press the setup buYon ” ” to select ringtones and adjust the volume and display brightness. AXer selecBng
the item to be set, press ” /+” and ” /-” to adjust the
parameters.

9

4-Wire Analog Video Intercom Kit User Manual
3.Access Control Management
3.1 Master Management Card
Press and hold the “buYon” and power on unBl you hear a beep. Swipe two cards consecuBvely; the first card (beep) is for adding, and the second card (beep) is for deleBng. AXer se^ng, power off and on again.
3.2 Adding User Cards
While the device is in working mode, swipe the Add Card (six beeps). Swipe the cards you want to add (beep for each). Swipe the Add Card again (six beeps) to complete the addiBon.
3.3 Dele-ng User Cards
While the device is in working mode, swipe the Delete Card (three beeps). Swipe the cards you want to delete (beep for each). Swipe the Delete Card again (three beeps) to complete the deleBon. To clear all cards: While the device is in working mode, swipe the Delete Card (three beeps). Then, swipe the Add Card (three beeps). Wait for 10 seconds unBl you hear a beep, indicaBng the clearing is complete.
10

4-Wire Analog Video Intercom Kit User Manual 11

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>