NINGBO 6274LM EchoGlow Speaker User Manual

NINGBO 6274LM EchoGlow Speaker

Specifications

• Input: 5V, 1A
• Battery: 1 x 18650 1800mAh
• Bluetooth speaker: 4.5W
• Charging time: 3-4 hours
• Working time: approx. 3 hours (Bright 5000K mode)
• Light source: 36pcs SMD2835
• Light: Warm(3000K) – Medium(4000K) – Bright(5000K) – Off
• USB-C cable: 19.7 inches (50cm)
• Size: Dia5.71 x 10.24 inches (Dia145x260mm)
• Weight: 1.49 lbs (680g)

Product Parts

• 1 x EchoGlow Speaker
• 1 x USB-C cable

Charging EchoGlow Speaker

1. Insert the USB-C end of the provided charging cable into the charging port located on the bottom of the EchoGlow Speaker.
2. Insert the other end into any USB power source (USB adapter, power bank, etc.).
3. The battery indicator light will light up red, indicating charging is in process.
4. It will take approximately 3-4 hours to fully charge your EchoGlow Speaker.
5. Once the unit is fully charged, the battery indicator light will turn off.

Connect to Bluetooth

1. Press and hold the Bluetooth button to turn on the unit’s Bluetooth. A chime will sound, and the unit will enter Bluetooth mode.

Lamp Functions

1. Press and hold the light button to turn the light ON (Warm light).
2. Press the light button again for Medium light.
3. Press the light button again for Bright light.
4. To turn the lamp OFF, press and hold the light button again.

FCC Statement:

Frequently Asked Questions

• Q: How can I reset my EchoGlow Speaker?
  • A: To reset your EchoGlow Speaker, press and hold the power button for 10 seconds until you hear a beep sound, indicating the reset.
• Q: Can I use my EchoGlow Speaker while it’s charging?
  • A: Yes, you can use your EchoGlow Speaker while it’s charging. However, it’s recommended to disconnect it from the power source for better portability once fully charged.

Specifications

• Input: 5V,1A
• Battery: 1 x 18650 1800mAh
• Bluetooth speaker: 4Ω 5W
• Charging time: 3-4 hours
• Working time: approx. 3 hours(Bright 5000K mode)
• Light source: 36pcs SMD2835
• Light: Warm(3000K)-Medium(4000K)-Bright(5000K)-Off
• USB-C cable: 19.7inches(50cm)
• Size: Dia5.71 x 10.24 inches(Dia145x260mm)
• Weight: 1.49lbs(680g)

Product part

Product Function

CHARGING ECHOGLOW SPEAKER

1. Insert the USB-C end of the provided charging cable into the charging port located on the bottom of the EchoGlow Speaker. Insert the other end into any USB power source (USB adapter, power bank, etc.). See the picture below.
2. The battery indicator light will light up red, indicating charging is in process.
3. It will take approximately 3-4 hours to fully charge your EchoGlow Speaker.
4. Once the unit is fully charged, the battery indicator light will turn off.

CONNECT TO BLUETOOTH

1. Press and hold the bluetooth button to turn on the unit’s Bluetooth. A chime will sound and the unit will enter Bluetooth mode. See the picture as below.
2. Turn your phone’s Bluetooth function by accessing the Settings menu. Select “BELL+HOWELL BY DESIGN”from the Bluetooth device list and connect to it. Once connected, the chime will sound.
3. You will be able to control the sound, volume, etc. through your phone. Play music through this Bluetooth speaker.
4. Once the EchoGlow Speaker has been successfully paired to your phone, it will automatically pair up the next time the unit is on.
5. If you need to pair the EchoGlow Speaker to a different phone, you have to disconnect from the current phone and repeat the pairing process for the new phone. If the phone’s Bluetooth is turned off and then turned on again, you need to re-connect to product manually.
6. Turn off the Bluetooth by pressing the bluetooth button

LAMP FUNCTIONS

1. Press and hold the light button to turn the light ON (Warm light)
2. Press the light button again for Medium light.
3. Press the light button again for Bright light.
4. To turn the lamp OFF, press and hold the light button again.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  Particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>