KSIX BESP01 Oasis Smart Mirror User Manual
- September 23, 2024
- KSIX
Table of Contents
USER MANUAL
KSIX OASIS SMART MIRROR – BESP01
Characteristics
1.1 Technical specifications
Power: 36 W
Speaker power: 3 W
Input voltage: 220-240V 50/60Hz
Luminous flux: 1,000 lm
LED color: RGB + Warm white
Light temperature: 3,000K
CRI index: 80
Number of LEDs 126 (RGB) + 126 (Warm white)
Lifespan: 30.000 h
Lightning angle: 110°
Protection rating: IP44
Operating temperature: -20 a +40°C
Dimensions: Ø70 x 3 cm
Weight: 6 kg
Material: Glass + Aluminium
Frequency range: 24GHz
Maximum transmitted power in frequency ranges: 6 dBm
Connectivity WiFi
Compatibility: Android 4.4 / iOS 8.0 and later versions
Voice assistants: Alexa and Google Assistant App Tuya Smart
1.2 In the box
1 x Smart mirror
1 x Cable
1 x Remote control (works with 2 x AAA batteries, not included)
4 x Screws
1 x User manual
1.3 Diagram
- Smart mirror
- Anti-fog touch button
- Remote control
- Compatible Tuya Smart App
1.4 Installation method
- Turn off the power before installing the mirror.
- Use a drill to make the holes in the wall.
- Insert the wall plugs into the holes.
- Insert the screws into the wall plugs and reserve 5-6 mm of the screw outside the wall.
- Connect the wires accordingly L-L; N-N; GDN-GDN. Align the mirror plate holes with the screws to hang the mirror on the wall.
- Turn on the power.
Remote control
The Oasis smart mirror includes a remote control to manage some of its features. You can control many more from the Tuya Smart app.
- Night light
- Turn on button
- Colour changing buttons
- Mode changing buttons
- Speed changing buttons
- Brightness changing buttons
- Brightness adjustment buttons
- Scene buttons
- Turn off button
- Static red
- Static green
- Static blue
- Static white
Initial setup
3.1 Download the app
The Oasis smart mirror compatible app is called Tuya Smart.
There are two ways to download it:
-Tap here to download the Tuya Smart app from Google Play or App Store.
-You can also download the app directly by typing “Tuya Smart” in the Google Play or App Store search engine.
3.2 Pairing iOS / Android devices
- First, and most importantly, make sure to have your smartphone’s BT and WiFi enabled.
- Access the Tuya Smart app. Once inside, tap on add device.
- Tap on the Lighting section on the left side of your screen. Then, tap on the ceiling light (Wi-Fi) icon.
- Enter your Wi-Fi address and password.
- Tap on “Add Device”.
- Wait patiently for thedevice to appear.
- Tap on the device to pair it
Note:
- To sync properly with your mobile phone, you must accept all the access permissions requested by the app.
- When pairing your phone with the device for the first time, ensure you’re connected to a WiFi network The connection process may take a few minutes.
- After the initial connection, you can control the device using a new WiFi network or mobile data, from anywhere at any time.
- For the first connection, stay close to the router for a faster setup.
- When connecting multiple devices to the WiFi network, avoid placing them too close together to prevent signal interference.
Tuya Smart App
4.1 Lighting control
From the app, you can control white lighting, colours, and choose from a wide
range of preset scenes.
RGB control
To control millions of RGB colours, activate the button in the top-right
corner. Select your desired colour by tapping it, and use the bar below to
adjust the brightness.
CCT white colour control
To adjust the shades of CCT white light, activate the button on the middle-
right, above the white selection area. Tap any white shade to choose your
lighting, and adjust the brightness using the bar beneath the white lighting
area.
Scene modes
Select preset scene modes from this section. There are several groups of scene
modes, each offering a variety of lighting patterns and colour mixes Tap to
select your preferred one. At the top, a horizontal bar allows you to create
your own scenes by adjusting colours, speed, and transitions. You can save
custom scenes within the app.
4.2 Music and lighting sync tool
To activate the speaker and sync the lighting with music, make sure the mirror
is connected to the BT ‘SmartLife’ network.
You must accept all permissions to use this function and activate the button
in the top-right corner. You can also control music from Spotify, Apple Music,
and other apps directly through the Tuya Smart app, using six commands: play,
pause, next/previous song, and volume +/-.
4.3 Extra features menu
In this section of the app, youll find a variety of options, including power-
on behaviour, rhythms, music, timers, and scheduling.
Each tool is simple to use. Just tap on the desired option and set your
parameters 4.4 Voice assistants
To set up voice assistants, tap the top-right corner and then the edit icon.
From here, you can grant access to third-party assistants like Alexa andGoogle
Assistant to control the mirror. You can adjust brightness, change the light
temperature, or turn the smart mirror on and off with voice commands. From
this same screen, you can also adjust other settings, such as the mirror’s
name and access device information.
4.5 More about the App
You can adjust various functions from the menu button in the top-right corner
of the app.
- Change the device name as needed.
- View device information.
- Use Tap-to-Run and Automation to check the Intelligent Automation linked to your device.
- Find instructions for connecting your device to Amazon Alexa or Google Assistant under “Supported Third-Party Control”.
- Enable Disconnection Notices to alert you when the device goes offline.
- Create a Group to control multiple smart devices simultaneously.
- Report issues or seek assistance via the FAQ & Feedback section
- Add the device to your smartphone’s home screen with the “Add to Home Screen” feature.
- Check the network connection status of the device.
- View firmware information and install updates.
Mirror features
5.1 Anti-fog system
This smart mirror features an anti-fog system that prevents mist from forming
on the surface due to hot water vapour.
You can activate it using the touch button at the bottom of
the mirror, via the remote control, or through the Tuya app.
5.2 Speaker
The KSIX Oasis includes a built-in 3W speaker.
5.3 Lighting
The Oasis mirror features a lighting system with a luminous flux of 1,000
lumens and includes 252 LEDs with an RGB colour setup, offering 16 million
combinations. It also features warm white lighting at 3,000K.
5.4 Low consumption
This smart mirror consumes low power, operating at 36W.
Safety, maintenance and usage recommendations
Read all documentation and instructions provided before using the product. Use only accessories compatible with the product. Clean the product regularly with a dry cloth. The product must be unplugged or switched off when cleaning. Keep the product’s ports and connectors clean from dust, dirt, etc., to ensure proper connection. Avoid breaking the product. Do not apply excessive pressure to any part of the product. Avoid impacts and falls that may damage the product. If the product has a cable, do not bend it and do not pull it with excessive force to avoid damaging it Avoid exposure to any liquid. Do not wet or immerse the product. Do not use the product with wet hands. Always keep the product in a dry place away from moisture. Always keep the product away from flammable materials and do not expose it to fire, heat sources or extreme temperatures. When the product is not in use, nplug it and store it in a clean, dry place away from moisture and dirt. If water enters the product, immediately disconnect it from any power source or device to which it is connected. Do not use the product for any purpose other than that for which it was designed. Do not use the product if you notice any visible defects. Do not open or disassemble the product or attempt to repair it yourself. These actions invalidate the warranty. Keep the product out of the reach of children. Recycle the product in accordance with local environmental rules and regulations. If the product includes a battery, maintain the state of charge between 20% and 80% of its capacity to preserve the battery life.
Legal Note
Atlantis Internacional, S.L, declares that this product is in compliance with the essential requirements and any other applicable or enforceable provisions of Directive 2014/53/EC. The functions and characteristics described in this manual are based on tests carried out by Atlantis Internacional S.L. The user is responsible for examining and verifying the product when purchasing it. Atlantis Internacional S.L. declines all responsibility for any personal, material, economic damage, as well as any damage to your device, due to misuse, abuse or improper installation of the product.
Disposal of electrical and electronic equipment
The CE symbol indicates that electrical and electronic equipment must be disposed of separately. This product is designed to be disposed of separately at an appropriate waste collection point. Do not dispose of it with household waste If the equipment is battery operated, the batteries must be removed and disposed of at a separate collection point for this type of waste. If the batteries are not removable, do not attempt to remove them, as this must be done by a qualified professional. Separate disposal and recycling help to conserve natural resources and prevent harmful consequences to human health and the environment that could arise from improper disposal. The final price of this product includes the cost of the environmental management necessary for the correct treatment of the waste generated. For more information, please contact the seller or your local waste management authority.
Declaración de Conformidad CE / CE
We hereby declare that the product (s) listed below satisfies the provision
for CE-marking, , complies with Directive 2014/53/EU and may be sold in all EU
countries, according to the following European directive(s):
EN 55015:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61547:2009
EN IEC 55015:2019+A11:2020
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN 61547:2009
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.6 (2023-06)
Article: BESP01
EAN: 8427542134697
Manufacturer: ATLANTIS INTERNACIONAL, S.L.
Address :
This declaration of conformity is issued under the sole responsibility of the
manufacturer
Place and date of the declaration
L’Hospitalet de Llobregat, July 02, 2024
Nico Broder
General Manager
Documents / Resources
| KSIX
BESP01 Oasis Smart
Mirror
[pdf] User Manual
M1000308P10A, VA-3-20220401, BESP01 Oasis Smart Mirror, BESP01, Oasis Smart
Mirror, Smart Mirror, Mirror
---|---