KSIX BTW02N Cosmos Wireless Earphones User Manual
- June 1, 2024
- KSIX
Table of Contents
WIRELESS EARPHONES – USER MANUAL
COSMOS – BTW02N
Characteristics
1.1 Technical specifications
- Earphones playtime: 6 hours
- Case playtime: 18 hours
- Earphones battery: 50 mAh
- Case battery: 400 mAh
- Frequency range: 20 Hz – 20 kHz
- Protection rating: IPX4 (against sweat proof)
- Operation range: 10 meters
- Connectivity: Bluetooth 5.4
- Bluetooth frequency range: 2.402-2.480 GHz
- Maximum transmitted power in frequency ranges: 4 dBm
- Technology: Open Ear
- Sensitivity: 115±3dB
- Impedance: 7Ω±15 at 2khz
- Earphones charging time: 1 hour
- Case charging time: 2 hours
- Case dimensions: 7.2 x 6.3 x 2.7 cm
- Earphones weight: 14.2 g (both)
- Case weight: 49 g
- Material: ABS + TPE
1.2 In the box
- 1 X Pair of earphones
- 1 x Charging case
- 1 x USB-A to USB-C cable (30 cm)
- 1 x Manual
1.3 Product details
- LED indicators
- Fastening hooks
- USB-C charging port
1.4 Earphones LED indicators
The earphones LED indicator informs about the state of the connection, among
other aspects:
Charging case | When charging the case, the LED flashed red colour. |
---|---|
Charging earphones | When charging the earphone, the case LED will be steady |
blue colour.
Initial setup
2.1 Turn on/off the earphones
To switch the earphones on, open the charging case, then the earphones will
turn on and pair with each other automatically.
To turn them off automatically, place the earphones into the charging case.
Once they are in the charging case, they will start to charge automatically.
To turn them on manually, tap on both earphones for 3 seconds, you will then
hear the word “Power on” To turn them off manually, long tap on both
earphones.
2.2 How to pair the earphones
Take the earphones out of the charging chase to activate the pairing mode
automatically.
Activate the Bluetooth on your device, search for “KSIX COSMOS” on the
available Bluetooth devices list and select it. Once the connection has been
successful, you will hear the word “Connected”. Once the earphones have been
connected to a device, they will pair with it automatically when taken out of
the charging case.
Troubleshooting: If the earphones do not turn on automatically, it should
be due to low battery. Please, charge the earphones. If they do not pair with
your device properly, reset the earphones as instructed later in this manual.
2.3 Usage method
ON/OFF| To switch on or off, long press for 3 seconds in any of the earphones.
To switch off, long press for 5 seconds in any of the earphones.
---|---
Play/Pause| Tap the right/left earphone one to play or pause the music.
Volume -/+| To decrease the volume, triple tap left. To increase the volume,
triple tap right.
Previous/Next song| To play the previous song, tap left earphone twice. To
play the next song, tap right earphone twice.
Answer/Hang up calls| To answer an incoming call, tap left or right earphones
once. To hang up, tap left or right earphones once again
Reject calls| To reject an incoming call, long press right or left earphones
for 2 seconds.
Voice assistant| To activate voice assistants, long press left or right
earphone for 3 seconds.
2.4 How to reset the earphones
To reset the earphones, disconnect them, access your smartphone’s Bluetooth
settings, tap on “KSIX COSMOS” and tap on “Unpair”. Place them on the charging
case, close the cover, then take them out and repeat the pairing process. If
the left and right earphones keep flashing blue quickly, tap the right
earphone 6 times to pair them. Once the left and right earphones are paired
with each other, they will slowly flash a blue light. Then, repeat the pairing
process with your device.
2.5 Charging the earphones
These earphones incorporate a USB-C port. Connect the cable that is included
in the package or a compatible cable to a wall charger, powerbank or computer
output. It takes about 2 hours to charge the earphones up to full.
Troubleshooting: If the earphones LED indicator does not turn on during
its charge, it should be due to a power supply issue. Please, check if the
charging cable is correctly connected to the charging case. Check both ends of
the cable, as well as the power supply state and the device you are using to
charge, whether it is a wall charger, a powerbank or a PC port.
Maintenance recommendations
- Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
- Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
- Avoid breaking the device. Do not put objects over it or bend it too strong.
- If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
- Do not wet the product. Keep it always in a dry place, away from humidity.
- When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
- If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
- Avoid dropping or hitting the product. It might be damaged.
- Do not use the product for anything other than its intended use.
- Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
- When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
- If the product is wet or damaged do not use it.
- Do not use the product with wet hands.
- Do not leave the product in contact with flammable materials.
- Do not expose the product to high temperatures (for example: inside a car during hot weather).
- Do not throw the product into fire.
- Keep the product away from children.
- Disconnect or switch off the product if you are not going to use it for a long period of time.
- Do not use the device if you perceive any visible defects.
- Do not attempt to open or puncture the product. You might damage it.
- Do not use the product with incompatible devices.
- Do not dismount or modify the product. These actions will invalidate the Warranty.
Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EC. The features and functions described in this manual are
based on tests made by Atlantis Internacional S.L. It is the user’s
responsibility to examine and verify the product after its purchase. Atlantis
Internacional S.L. is not responsible and will never be liable for any
personal loss or injury, economical loss, material loss or any damage due to
misuse, abuse or improper installation of the product. Atlantis Internacional
S.L. is not responsible and will never be liable for any function,
communication and connection failure between the product and Bluetooth enabled
devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be
collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of it as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed of in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling help conserve natural resources and prevent negative consequences for human health and the environment that might result from correct disposal.
- For more information, contact the retailer or the local authorities in charge of waste management
Declaration of Conformity
We hereby declare that the product (s) listed below satisfies the provision
for CE-marking, , complies with Directive 2014/53/EU and may be sold in all EU
countries, according to the following European directive(s):
50663:2017
62479:2010
IEC 62368-1:2020+A11:2020
301 489-1 v 2.2.3 (2019-11)
ETSI EN 301 489-17 v 3.2.4 (2020-09)
55032:2015+A11:2020+A1:2020
55035:2017+A11:2020
ETSI 300 328 v2.2.2 (2019-07)
Article: BTW02N
EAN: 8427542134574
Manufacturer/ ATLANTIS INTERNACIONAL, S.L.
Address
Barcelona (Spain)
Place and date of the declaration April 16, 2024
General Manager
Documents / Resources
| KSIX
BTW02N Cosmos Wireless
Earphones
[pdf] User Manual
BTW02N, BTW02N Cosmos Wireless Earphones, Cosmos Wireless Earphones, Wireless
Earphones, Earphones
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>