KSIX ORION BXTW09B Wireless Earphones User Manual
- May 15, 2024
- KSIX
Table of Contents
**KSIX ORION BXTW09B Wireless Earphones User Manual
**
Technical specifications
Earphones playtime : 5 hours
Case playtime : 10 hours
Earphones battery : 35 mash
Case battery : 200 mash
Frequency range : 20 Hz – 10 kHz
Protection rating : IPX4 (splash proof)
Operation range : 10 meters
Connectivity : Bluetooth 5.3
Technology : True Wireless Stereo (TWS)
Noise cancelling : ENC, Dual Mic
Sensitivity : -42±1 dB
Impedance : 32 Ω
Earphones charging time : 1 hour
Case charging time : 1 hour
Case dimensions : 4.5 x 5.8 x 2.5 cm
Earphones weight : 8 g (both)
Case weight : 34 g
Material : ABS
In the box
1 X Pair of earphones
1 x Charging case
1 x USB-A to USB-C cable (30 cm)
3 x Pairs of earpads
1 x Manual
Product details
Earphones with touch control, LED indicators, microphone and charging pins and charging case with LED indicator
Case USB-C charging port
3 x pairs of included earpads
Earphones LED indicators
The earphones LED indicator informs about the state of the connection, among other aspects:
Pairing | A blue light will flash quickly until the earphones are paired. |
---|---|
Connected | No light will show. |
Power on | The light will flash blue and red alternatively a total of |
12 times.
Power off| A red light will flash 3 times and no light will be shown
afterwards.
Charging| A fixed red light will show while charging.
Turn on/off the earphones
The earphones turn on automatically when taken out of the charging case. To turn them off automatically place the earphones into the charging case. Once they are in the charging case, they will start to charge automatically
To turn them on manually tap both earphones for 5 seconds, you will then hear the word “Power on”. To turn them off manually tap both earphones for 5 seconds, you will then hear the word “Power off
How to pair the earphones
Take the earphones out of the charging chase to activate the pairing mode automatically.
Activate the Bluetooth on your device, search for KSIX ORION on the available Bluetooth devices list and select it. Once the connection has been successful, you will hear the word “Connected”. Once the earphones have been connected to a device, they will pair with it automatically when taken out of the charging case.
Troubleshooting : If the earphones do not turn on automatically, it should be due to low battery. Please, charge the earphones and the charging case. If only one earphone is working, it should be due to a connection failure. Please, reset the earphones as instructed later on in this manual
Usage method
Use the touch control to make use of all the functions of the device:
Play/Pause | Tap the left or right earphone once. |
---|---|
Previous/Next song | To play the previous song, tap the left earphone |
3 times.To play the next song, tap the right earphone 3 times.
Volume -/+| To decrease the volume, tap the left earphone twice. To
increase the volume, tap the right earphone twice.
Answer/Hang up calls| To answer an incoming call, tap the left or
the right earphone twice.To hang up, tap the left or the right earphone twice.
Reject calls| To reject an incoming call, tap the left or right
earphone for 2 seconds.
Voice assistant| To activate the voice assistant, tap on the right
earphone during2 seconds
Switch audio mode| To switch between game and music audio mode,
tap on the right or left earphone 5 times.
How to reset the earphones
To reset the earphones disconnect them, access your smartphone’s Bluetooth settings, tap on KSIX ORION and tap on “Unpair”. Place them on the charging case, take them out and repeat the pairing process.
If the left and right earphone flash red and blue lights, tap on the right earphone 6 times to pair. Once the right and left earphones are paired with each other, they will flash a blue light slowly. Then, pair them to your smartphone via Bluetooth.
Charging the earphones
To charge the earphones, simply place both inside the charging case, close the cover, and they will start to charge automatically. The LED charging case indicators will light up for 7 seconds and the earphones LED indicators will flash blue and red twice. Make sure that both earphones are properly introduced in the case
It takes about 1 hour to charge the earphones up to full.
Charging the charging case
The charging case incorporates a USB-C port. There is a green round LED that will light up for 7 seconds when charging the earphones. When the charging case’s battery is low, this LED indicator will flash green light for 7 seconds.
It takes about 1 hour to charge the charging case up to full. With the charging case being fully charged, you will be able to charge your earphones up to full about 2 times.
Troubleshooting : If the charging case LED indicator does not turn on during its charge, it should be due to a power supply issue. Please, check if the charging cable is correctly connected to the charging case. Check both ends of the cable, as well as the power supply state and the device you are using to charge, whether it is a wall charger, a power bank or a PC port
Maintenance recommendations
- Regularly clean the product with a dry cloth. The product must be disconnected or switched on when you clean it.
- Keep the connectors and/or ports free from dust, lint, etc. to prevent improper connections.
- Avoid breaking the device. Do not put objects over it or bend it too strong.
- If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
- Do not wet the product. Keep it always in a dry place, away from humidity.
- When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
- If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
Safety information
Please read the following instructions before using the device for the first time:
-
When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
-
If the product is wet or damaged do not use it.
-
Do not use the product with wet hands.
-
Do not leave the product in contact with flammable materials.
-
Do not expose the product to high temperatures (for example: inside a car during hot
weather) -
Do not throw the product into fire.
-
Keep the product away from children.
-
Disconnect or switch off the product if you are not going to use it for a long period of time.
-
Do not use the device if you perceive any visible defects.
-
Do not attempt to open or puncture the product. You might damage it.
-
Do not use the product with incompatible devices.
-
Do not dismount or modify the product. These actions will invalidate the Warranty
Legal Note
Hereby, Atlantis International S.L. declares that this product is in
compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EC. The
features and functions described in this manual are based on tests made by
Atlantis International S.L. It is the user’s responsibility to examine and
verify the product after its purchase. Atlantis International S.L. is not
responsible and will never be liable for any personal loss or injury,
economical loss, material loss or any damage due to misuse, abuse or improper
installation of the product. For electronical devices with Bluetooth: Atlantis
International S.L. is not responsible and will never be liable for any
function, communication and connection failure between the product and
Bluetooth enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of it as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling help conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
- For more information, contact the retailer or the local authorities in charge of waste management.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>