KSIX BXPLAFLED40 Rainbow LED Ceiling Light User Guide
- June 3, 2024
- KSIX
Table of Contents
KSIX BXPLAFLED40 Rainbow LED Ceiling Light
TECHNICAL SPECIFICATIONS
- Light output: 30W
- RGB output: 5W
- Speaker output: 5W
- Dimensions: 40 x 7 cm (diameter) Bluetooth version: 4.0
- Color temperature: 3000K-6800K Brightness: 2200 lumens
- Lamp bulbs beam angle: 165°
- Light beam angle: 180°
- Working voltage: AC200~265V Working temperature: -20~50°C RA: ≥80
- Lifetime: 30000 h
- Light source type: LED lamp, 108pcs Irradiation area: 10-20 m2
IN THE BOX
- 1 x LED ceiling lamp
- 1 x remote control 4 x screws
- 4 x plastic wall plugs
- 1 user manual
DIAGRAM
WARNING:
Before starting the installation, turn off the power at the main electrical
panel.
INSTALLATION
-
Separate the base of the lampshade from the lamp. To do this, turn the shade counterclockwise.
-
Insert the wiring through the wiring hole.
-
Attach the base to the ceiling. Attach the dowels first, then screw the base to the ceiling.
-
Connect the wiring to the terminals.
-
Attach the base to the lampshade. To do this, place the opening on the slide rail and turn the lamp clockwise until it is fully secured to the base.
Maintenance recommendations
- Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
- Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
- Avoid breaking the device. Do not put objects over it or bend it too strong.
- If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
- Do not wet the product. Keep it always in a dry place, away from humidity.
- When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
- If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
- Avoid dropping or hitting the product. It might be damaged.
- Do not use the product for anything other than its intended use.
- Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
- When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
- If the product is wet or damaged do not us it.
- Do not use the product with wet hands.
- Do not leave the product in contact with flammable materials.
- Do not expose the product to high temperatures (for example: inside a car during hot weather)
- Do not throw the product into fire.
- Keep the product away from children.
- Disconnect or switch off the product if you are not going to use for a long period of time.
- Do not use the device if you perceive any visible defects.
- Do not attempt to open or puncture the product. You might damage it.
- Do not use the product with incompatible devices.
- Do not dismount or modify the product. These actions will invalidate the Warranty.
Legal Note
Hereby, Atlantis International S.L. declares that this product is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EC. The features and functions described in this manual are
based on tests made by Atlantis International S.L. It is the user’s
responsibility to examine and verify the product after its purchase. Atlantis
International S.L. is not responsible and will never be liable for any
personal loss or injury, economical loss, material loss or any damage due to
misuse, abuse or improper installation of the product. Atlantis International
S.L. is not responsible and will never be liable for any function,
communication and connection failure between the product and Bluetooth enabled
devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be
collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
- For more information, contact the retailer or the local authorities in charge of waste management.
Warranty
5-year warranty applicable to LED components only.
REGISTER YOUR WARRANTY · 5 YEARS
Scan this code and sign up online
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>