KSIX LXTW01N Wireless Headphones User Manual
- June 1, 2024
- KSIX
Table of Contents
KSIX LXTW01N Wireless Headphones User Manual
ENGLISH – USER MANUAL
Wireless headphones – LXTW01N
Characteristics
Technical specifications
Playtime: 5 hours
Battery: 200 mAh
Frequency range: 20 Hz – 20 kHz
Protection rating: IPX3 (sweat and rain proof)
Operation range: 10 meters
Connectivity: Bluetooth 5.3
Bluetooth frequency range: 2402-2480 GHz
Maximum transmitted power in frequency ranges: 6dbm
Sensitivity: 110±3 dB
Impedance: 32 Ω
Charging time: 2.5 hours
Weight: 193 g
Material: ABS + PU
In the box
1 x Headset
1 x USB-A to USB-C cable (30 cm)
1 x Jack 3.5 mm (1 m)
Product details
- LED indicator
- M button
- Volume
- ON/OFF
- Jack port
- USB-C port
Headphones LED indicators
The headphones LED indicator informs about the state of the connection, among other aspects:
Initial setup
Turn on/off the headphones
To turn on the headphones press the multifunction button for 3 seconds, you will then hear “Power on”. To turn them off, do the same; you will then hear “Power off”.
How to pair the headphones
Turn the headphones on as shown previously. When you do so, the blue and red pairing lights will start to flash alternatively, this means that the device is in pairing mode. Activate the Bluetooth on your device, search for “LXTW01N” on the available Bluetooth devices list and select it. Once the connection has been successful you will hear a special sound. Once the headphones have been connected to a device, they will pair with it automatically when turned on.
Troubleshooting: If the headphones do not turn on automatically, it should be due to low battery. Please, charge the headphones. If they do not pair with your device properly, reset the headphones as instructed later in this manual.
Usage method
How to reset the headphones
To reset the headphones, disconnect them, access your device’s Bluetooth settings, tap on “LXTW01N” and then on unpair. Turn them on again and repeat the pairing process.
Charging the headphones
These headphones incorporate a USB-C port. Connect the cable that is included
in the package or a compatible cable to a wall charger, powerbank or computer
output.
It takes about 2.5 hours to charge the headphones up to full.
Troubleshooting: If the headphones LED indicator does not turn on during its charge, it should be due to a power supply issue. Please, check if the charging cable is correctly connected to the charging case. Check both ends of the cable, as well as the power supply state and the device you are using to charge, whether it is a wall charger, a powerbank or a PC port.
Maintenance recommendations
- Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
- Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
- Avoid breaking the device. Do not put objects over it or bend it too strong.
- If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
- Do not wet the product. Keep it always in a dry place, away from humidity.
- When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
- If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
- Avoid dropping or hitting the product. It might be damaged.
- Do not use the product for anything other than its intended use.
- Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
- When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
- If the product is wet or damaged do not use it.
- Do not use the product with wet hands.
- Do not leave the product in contact with flammable materials.
- Do not expose the product to high temperatures (for example: inside a car during hot weather).
- Do not throw the product into fire.
- Keep the product away from children.
- Disconnect or switch off the product if you are not going to use it for a long period of time.
- Do not use the device if you perceive any visible defects.
- Do not attempt to open or puncture the product. You might damage it.
- Do not use the product with incompatible devices.
- Do not dismount or modify the product. These actions will invalidate the Warranty.
Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of it as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed of in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling help conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
- For more information, contact the retailer or the local authorities in charge of waste management.
CE Declaration of Conformity
We hereby declare that the product (s) listed below satisfies the provision for CE-marking, , complies with Directive 2014/53/EU and may be sold in all EU countries, according to the following European directive(s):
EN 50663:2017
EN 62479:2010
EN IEC 62368-1:2020+A11:2020
ETSI EN 301 489-1 v 2.2.3 (2019-11)
ETSI EN 301 489-17 v 3.2.4 (2020-09)
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017+A11:2020
ETSI EN 300 328 v2.2.2 (2019-07)
Article: LXTW01N
EAN: 8427542132419
Manufacturer:
ATLANTIS INTERNACIONAL, S.L.
Address:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Place and date of the declaration
L’Hospitalet de Llobregat, August, 4th 2023
Nico Broder
General Manager