KSIX BXLEDST10M RGB LED Striplight 10m With Remote Control User Manual

KSIX BXLEDST10M RGB LED Striplight 10m With Remote Control

Technical information

• LED: 5050RGB
• LED Quantity: 30 pcs per meter Output power: 24W
• Input voltage: AC 100V-240V
• Output voltage: DC12V
• Distance of remote operation: within 5m Working temperature:-20-+45°C Illumination angle: 120°
• Dimensions: 500010 (mm) *2 Lumens: 12-15 lm per LED

In the box

• 2 led strip
• 1 remote control 1 AC adapter
• 1 User manual
• 1 Infrared receiver 2 grippers

Illustration

REMOTE CONTROL INSTRUCTIONS

1. Increase / Decrease brightness
2. 16 static colors
3. On / Off
4. Flash effect
5. Stroboscopic effect
6. Fade effect
7.  Smooth effect

FAQS

The LED strip does not light up after connecting the controller and power on.

1.  Check the power input: Please use our supplied adapter or any other power source which is of the same type as our adapter. LED light must be used under 12V voltage.
2.  Check if the controller and the strip are properly connected. Confirm all connections are OK.
3.  Check if the remote control is switched on.

The LED strip is on, but the remote controller is not working or cannot control the LED light.

1.  Check if the insulation plate is in the remote control.
2.  Check if the battery of the remote control is well placed.
3.  Confirm that you are within 5m and align with infrared sensor.
4.  Try to change the battery.

Maintenance recommendations

• Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
•  If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information
Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather)
• Do not throw the product into fire.
• Keep the product away from children.
•  Disconnect or switch off the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
•  Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.
For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>