KSIX BXLED01 LED Strip User Manual

KSIX BXLED01 LED Strip

Specifications:

• 5 meters LED strip
• Power adapter
• Remote control
• DC cable

Product Information

• The LED strip lighting kit includes a 5-meter strip, power adapter, remote control, and DC cable. It is designed for indoor use and provides various lighting effects and colors.
• Safety Note: Do not modify the product or exchange any parts. Avoid covering the product once installed and connected to power. Keep the product away from high-heat objects and wet areas.

Usage Instructions

1. Connecting the Strip:
   To connect the strip, plug the power adapter into the DC cable, and then connect the DC cable to the LED strip. Finally, plug the power adapter into a power source.

2. Cutting the Strip:
   To cut the strip, disconnect it from the power supply. Use a pair of scissors to cut along the guides marked on the strip. Note that once cut, the strip cannot be reused.

3. Using the Remote Control:
   The remote control allows you to control various functions of the LED strip:

   • ON/OFF Button: Turn the strip on or off.
   • Light Button: Stabilize illumination without effects.
   • Speed Buttons: Change the speed of the light effects.
   • Brightness Adjustment Buttons: Increase or decrease lighting brightness.
   • Attenuation Buttons: Adjust the attenuation of the light.
   • Modes Buttons: Explore different lighting effects.

FAQ:

• Q: Can I reuse a cut LED strip?
  A: No, once the LED strip is cut, it cannot be used again.

• Q: Can I cover the LED strip after installation?
  A: It is recommended not to cover the LED strip once it is installed and connected to power to prevent overheating.

• Q: Can I install the LED strip in a wet environment?
  A: No, avoid installing the LED strip in wet places to prevent damage and ensure safety.

ENGLISH – USER MANUAL
LED STRIP – BXLED01

 Characteristics

Technical specifications

• Power: 7.2W/m
• Input: 220-240V / 50 Hz
• Luminous flux: 2,400 lm
• LED colour: CCT (6,000K – 6,500K)
• CRI index: 85
• Number of LEDs: 300
• Lifespan: 20,000 h
• Lighting angle: 120°
• Protection rating: IP20 (dustproof)
• Operating temperature: -20°C to +50°C Dimensions: 500 x 1 x 0.3 cm (long x wide x thick) Weight: 400 g
• Materials: ABS + PC
• Connectivity: Infrared
• 1.2 In the box
• 1 x LED strip
• 1 x Controller
• 1 x Power adapter
• 1 x DC cable

Product parts

1. 5 metres strip
2. Power adapter
3. Remote control
4. DC cable

Safety note : Don’t modify the product or exchange any parts. Do not cover the product once it is installed and connected to the power. Do not install the product on top of high-heat objects or in a wet place.
How to connect the strip
Connect the power adapter to the DC cable, and the DC cable to the strip. Then plug into a power source.
How to cut the strip
To perform this task, disconnect the strip from the power supply and with the help of a pair of scissors, make a cut in the guides marked on the strip.
Note : once the strip has been cut, it cannot be used again.

Remote control

The strip includes a remote control to also be able to make use of it. These are the functions of the buttons.

1. ON/OFF button: Press this button to turn on or off the strip.
2. Light: Press this button to stabilize the illumination without effects.
3. Speed: Press these buttons to change the speed of the light.
4. Brightness adjustment: Press these buttons to increase or decrease the lighting brightness.
5. Attenuation: Press these buttons to increase or decrease the attenuation.
6. Modes: Press these buttons to play with the different effects.

FAQS

The LED strip does not light up after connecting the controller and power on.

1. Check the power input: Please use our supplied adapter or any other power source which is of the same type as our adapter. LED light must be used under 12V voltage.

2. Check if the controller and the strip are properly connected. Confirm all connections are OK.

3. Check if the remote control is switched on.
   The LED strip is on, but the remote controller is not working or cannot control the LED light.

4. Check if the insulation plate is in the remote control.

5. Check if the battery of the remote control is well placed.

6. Confirm that you are within 5m and align with infrared sensor.

7. Try to change the battery.

Warnings

• Please, strictly follow this user manual to install and use the product to avoid accidents.
• Do not disrupt the product or modify any component.
• Turn off the power and the main electrical panel before installing or doing maintenance tasks to avoid damage from electric shock.
• Do not install the product on unstable or unsafe ceilings.
• Do not cover the product with blankets or similar objects.
• Do not handle any product component for installation, repairing or checking unless you are a qualified electrician. Wire connecting must follow IEE electric standard or any other valid national standard.
• Do not install the product above hot or wet surfaces.

 CE Declaration of Conformity

We hereby declare that the product (s) listed below satisfies the provision for CE-marking, , complies with Directive 2014/53/EU and may be sold in all EU countries, according to the following European directive(s):

• EN IEC 55015:2019+A11:2020
• EN IEC 61547:2020
• IEC 62321-4:2017 IEC 62321-3-1:2013
• IEC 62321-1:2013 IEC 62321-5:2013
• IEC 62321:6-2015 IEC 62321-7-1:2015
• IEC 62321-7-2:2017 IEC 62321-7-1:2015
• ArticleBXLED01
• EAN: 8427542133805
• Manufacturer: ATLANTIS INTERNACIONAL, S.L.

General Manager

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>