BELL lighting Upgrade of the Luminaires with Electronic Ballast Circuit Installation Guide
- September 23, 2024
- BELL lighting
Table of Contents
- Upgrade of the Luminaires with Electronic Ballast Circuit
- Product Information
- Specifications
- Product Usage Instructions
- Upgrade of Luminaires with Electronic Ballast Circuit
- Replacing Fluorescent Tube with Electronic Ballast
- Contact Information
- Q: Can I install the T5 LED tube myself?
- Q: Where can I find more information about the product?
Upgrade of the Luminaires with Electronic Ballast Circuit
Product Information
Specifications
-
Product: T5 LED Tube
-
Manufacturer: British Electric Lamps Ltd
-
Model: T5 LED Single Side Power Input
-
Address: BELL House, Foxbridge Way, Normanton Industrial
Estate, Normanton, West Yorkshire, WF6 1TN -
Contact: T: +44 (0)1924 893380, F: +44 (0)1924 894320, E:
sales@belllighting.co.uk -
Website: www.belllighting.co.uk
Product Usage Instructions
Upgrade of Luminaires with Electronic Ballast Circuit
1. Installation must be performed by a qualified
electrician.
2. Ensure to change the wiring as needed for compatibility.
Replacing Fluorescent Tube with Electronic Ballast
1. Remove the existing conventional fluorescent tube with
electronic ballast carefully.
2. Install the T5 LED tube with single side power input in its
place.
3. Make sure the power supply is switched off before starting
the installation.
Contact Information
If you have any questions or need assistance, contact British
Electric Lamps Ltd at the provided phone number or email
address.
FAQ
Q: Can I install the T5 LED tube myself?
A: It is recommended to have the installation done by a
qualified electrician to ensure safety and proper functioning.
Q: Where can I find more information about the product?
A: Visit the manufacturer’s website at
www.belllighting.co.uk or
contact them directly via email or phone.
Upgrade of the luminaires with electronic ballast circuit
Installation must be performed by a qualified electrician Change of wiring –
Yes
Connection example in accordance with DIN EN 62776:2015. (1) Turn off power
supply, remove fluorescent tube. (2) Remove the old luminaire ballast. (3)
Rewire the luminaire with single side power input. (4) Place the new T5 LED
tube, keeping in mind the single side input. (5) Lock the LED-tube by 90°
rotation switch on the power.
Ballast Fluorescent Tube
Conventional Fluorescent Tube with electronic ballast
No Ballast T5 Tube
Upgrade to T5 LED, single side power input
British Electric Lamps Ltd BELL House, Foxbridge Way, Normanton Industrial
Estate
Normanton, West Yorkshire. WF6 1TN T: +44 (0)1924 893380 F: +44 (0)1924 894320
E: sales@belllighting.co.uk
www.belllighting.co.uk