BELL lighting 11740 Multi Backlit LED Panel Instruction Manual
- June 17, 2024
- BELL lighting
Table of Contents
Installation Instructions: 11740
LED Wattage Switchable Backlit Panel
11740 Multi Backlit LED Panel
Date | Revision |
---|---|
13.09.23 | 1 |
Read these instructions before installation and retain for future reference
This equipment should be installed by a competent electrician
Important Information
We recommend that luminaires are installed by a qualified electrician
ensuring the installation complies with current IEE wiring regulations
BS7671:2018 & local building control.
- All tests should be carried out in accordance to EN 50172:2004.
- BELL will not accept responsibility for any claims arising from a poor installation.
This product may contain substances that can be hazardous to the environment
if not disposed of properly. Electrical and electronic equipment should never
be disposed of with general household waste but must be separated for its
correct treatment and recovery.
Where possible recycle your packaging.
https://bell-link.co/11756uk?r=qr
https://bell-link.co/11756eu?r=qr
Recessed
- Remove the ceiling plaster slab.
- Feed the main AC wire in driver terminal block respectively, connect the panel light and driver.
- Fix the panel light into plaster ceiling.
- Make sure the led panel light is firmly fixed, turn on the power.
For color changeable model (controlled by Slide Switch in lamp), please select
light color before installation, see below picture.
Choose color by slide switch with corresponding color temperature.
Technical Helpline +44 (0)1924 893380
www.belllighting.co.uk
British Electric Lamps Ltd
Unit A Foxbridge Way, Normanton Industrial Estate
Normanton, West Yorkshire. WF6 1TN
T: +44 (0)1924 893380
F: +44 (0)1924 894320
E: sales@belllighting.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>