BELL Lighting 06824 18W Deco Slim LED Bulkhead Installation Guide
- July 16, 2024
- BELL lighting
Table of Contents
BELL Lighting 06824 18W Deco Slim LED Bulkhead
Read these instructions before installation and retain them for future reference
- We recommend that luminaires are installed by a qualified electrician ensuring the installation complies with current lEE wiring regulations BS7671:2008 & local building control.
- All tests should be carried out in accordance with EN 50172:2004.
- Bell will not accept responsibility for any claims arising from a poor installation.
- The light source of this luminaire is not replaceable: when the light source reaches the end of life, the whole luminaire must be replaced.
Important user advice
- The ambient room temperature should not exceed 40°C.
- Ensure that there is adequate free-air ventilation around the fitting.
- It may be necessary to update your MCBs to allow for increased inrush current.
- Always switch off the main supply before installing.
- This product may contain substances that can be hazardous to the environment if not disposed of properly.
- Electrical and electronic equipment should never be disposed of with general household waste but must be separated for its correct treatment and recovery.
- Where possible recycle your packaging.
Installation Instructions
This equipment should be installed by a competent electrician.
- Remove bracket.
- Fix the bracket to the ceiling using the 2 expansion bolts.
- Connect the cable using the wiring diagram for the fitting version, and set the color temperature.
- Replace the terminal cover.
- Secure the fitting to the bracket and switch it on.
Wiring Diagrams
Color Temperature Settings
- British Electric Lamps Ltd, Unit A Foxbridge Way
- Normanton Ind Est, Normanton, West Yorkshire. WF6 1TN
- T: +44 (0)1924 893380 F: +44 (0)1924 894320 E:sales@belllighting.co.uk
- Technical Helpline +44 (0)1924 893380www.belllighting.co.uk
Read User Manual Online (PDF format)
Loading......