Alecto BW05 Microwave Bottle Sterilizer Instruction Manual
- June 10, 2024
- Alecto
Table of Contents
Alecto BW05 Microwave Bottle Sterilizer
CONTENT
UTILIZATION
First time use
Clean all parts of the BW05 by using e.g. a dishwasher.
Before every use
Wash all products before you start sterilizing. After cleaning, no food
residues and such may be left over. Disassemble all parts.
Use
Place the parts to be sterilized in the basket. The outsides of bottles may
touch each other, but the rest of the parts must not make contact with other
parts. Large bottles may be placed on their sides.
ZPut the basket with the parts into the lower basin and fill the basin with
200ml (preferably distilled) water.
(ATTENTION: Never use too much water, but neither let it boil dry).
Place the lid onto the lower basin and click it shut using the handles.
Place the BW05 into the microwave.
Use the following times:
| * power | high power | cool down |
|---|---|---|
| 500-800W | 6 min. | 5 min. |
| 850-1000W | 4 min. | 5 min. |
| 1100-1850W | 3 min. | 5 min. |
ATTENTION: Don’t use the grill or oven setting.
WARNING : When opening the lid, hot steam may escape.
When leaving products in the BW05 without opening the device, they’ll remain
sterile for at least 24 hours.
After use:
Remove the waste water, rinse the BW05 and dry well after rinsing.
The BW05 is suitable for dishwashers.
- Keep in mind that 200ml water is used. When using the device repeatedly, first remove the excess water.
- Ensure that the BW05 never boils dry.
- Never use a grill, oven or combination setting. Only use the microwave function.
- Never overfill the basket.
- The BW05 may still be hot when removing it from the microwave.
- Steam may escape when opening the lid. Steam is hot.
- Always wash your hands before emptying the BW05.
- Never rinse products after sterilizing them.
- Before use, ensure the lid is closed properly.
- After use, let the BW05 cool down for at least 5 minutes.
- Always keep the BW05 away from children.
- Never place bottle teats with sealing ring upside down into the BW05.