V-TAC VT-154ST 150W LED Street Light Chip Instruction Manual
- June 4, 2024
- V TAC
Table of Contents
V-TAC VT-154ST 150W LED Street Light Chip Instruction Manual
Dimensions
TECHNICAL SPECIFICATIONS
POWER| WATTS| LUMENS| LxWxH(mm)| CRI| INPUT VOLTAGE| BEAM ANGLE| DF| LIFE
TIME| SURGE PROTECTION GRADE| MOUNTING DIAMETER
---|---|---|---|---|---|---|---|---|---|---
VT-34ST| 30W| 4050 LM| 374.8×134.9×62.9mm| >70| AC:120-240V, 50/60Hz| 120°|
0.9| 25,000 Hours| 1KV/2KV| φ60MM
VT-54ST| 50W| 6850 LM| 434.8×169.9x63mm| >70| AC:120-240V, 50/60Hz| 120°| 0.9|
25,000 Hours| 1KV/2KV| φ60MM
VT-104ST| 100W| 13500 LM| 534.8x260x64mm| >70| AC:120-240V, 50/60Hz| 120°|
0.9| 25,000 Hours| 2KV/4KV| φ60MM
VT-154ST| 150W| 20300 LM| 534.8x260x64mm| >70| AC:120-240V, 50/60Hz| 120°|
0.9| 25,000 Hours| 2KV/4KV| φ60MM
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does notapply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.!
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- Replace any cracked protective shield.
- Minimum distance from lighted objects 1m.
- Proper grounding should be ensured throughout the installation.
- Please read through all following instructions before installing the unit.
- User should prepare all the necessary accessories and spare parts (Spare parts not provided) including junction box.
- The raised lighting must be connected to the earth ground.
- Installation must be performed by a qualified electrician.
Strictly follow these instructions for installing, avoid the intensity of power cable during installing.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
INSTALLATION & WIRING DIAGRAM
-
-
-
Switch OFF power before starting the installation.
-
Connect supply wires to luminare as displayed in the wiring diagram.
-
(a) Pass the cable through mounting adaptor, fix 4 screws on street light by 6mm allen wrench.
-
(b) Fasten 4 screws against the pole by 6mm allen wrench.
-
Turn ON the power to Test
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>