BELL lighting 11489 Virtus Flood Lights Installation Guide
- August 15, 2024
- BELL lighting
Table of Contents
BELL lighting 11489 Virtus Flood Lights
Specifications:
- Product Name: Virtus Flood Lights
- Models: 11489, 11492, 11495
- Manufacturer: British Electric Lamps Ltd
- Address: Unit A Foxbridge Way, Normanton Industrial Estate, Normanton, West Yorkshire, WF6 1TN
- Contact: T: +44 (0)1924 893380, F: +44 (0)1924 894320, E: sales@belllighting.co.uk
- Technical Helpline: +44 (0)1924 893380
Product Usage Instructions
Installation:
- Ensure the luminaire is installed by a qualified electrician following current IEE wiring regulations BS7671:2018 and local building control requirements.
- Read and understand all installation instructions before proceeding with the installation.
- Retain the instructions for future reference.
Disposal:
Dispose of the product responsibly to prevent environmental hazards. Do not
throw electrical and electronic equipment with general household waste. Ensure
proper separation for correct treatment and recovery.
Packaging:
Recycle the packaging whenever possible to reduce environmental impact.
FAQ:
-
Q: Can I install the Virtus Flood Lights myself?
A: It is recommended that the luminaires are installed by a qualified electrician to ensure compliance with regulations and safety standards. -
Q: How should I dispose of the product?
A: To prevent environmental hazards, do not dispose of electrical and electronic equipment with general household waste. Separate it for proper treatment and recovery.
Important Information
We recommend that luminaires are installed by a qualifi ed electrician ensuring
the installation complies with current IEE wiring regulations BS7671:2018 &
local building control..
- BELL will not accept responsibility for any claims arising from a poor installation.
- Do not cover with any insulation.
- Internal & external use.
This product may contain substances that can be hazardous to the environment
if not disposed of properly. Electrical and electronic equipment should never
be disposed of with general household waste but must be separated for its
correct treatment and recovery.
Where possible recycle your packaging.
Read these instructions before installation and retain for future
reference
This equipment should be installed by a competent electrician
Wattage Switchable
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- For type Y attachments:
if the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Important Information
We recommend that luminaires are installed by a qualifi ed electrician ensuring
the installation complies with current IEE wiring regulations BS7671:2018 &
local building control..
- BELL will not accept responsibility for any claims arising from a poor installation.
- Do not cover with any insulation.
- Internal & external use.
This product may contain substances that can be hazardous to the environment
if not disposed of properly. Electrical and electronic equipment should never
be disposed of with general household waste but must be separated for its
correct treatment and recovery.
Where possible recycle your packaging.
Read these instructions before installation and retain for future
reference
This equipment should be installed by a competent electrician
Physical Dimensions(Unit: mm/inch)
Technical Helpline +44 (0)1924 893380
www.belllighting.co.uk
British Electric Lamps Ltd
Unit A Foxbridge Way, Normanton Industrial Estate Normanton, West Yorkshire.
WF6 1TN
T: +44 (0)1924 893380
F: +44 (0)1924 894320
E: sales@belllighting.co.uk
www.belllighting.co.uk