FORTIN EVO-ONE Push to Start Remote Starters and Alarm Systems Installation Guide
- September 19, 2024
- FORTIN
Table of Contents
FORTIN EVO-ONE Push to Start Remote Starters and Alarm Systems
Specifications
- Product Name: THAR-GM6 Immobilizer Bypass
- Compatibility: Cadillac ATS, CTS, CTS-V, Escalade; Chevrolet Tahoe, Suburban; GMC Yukon, Yukon XL (Model Years: 2013-2020)
- Bypass Firmware Version: 70.45
- Origin: Made in Canada
- Manufacturer Website: www.fortinbypass.com
Product Usage Instructions
Installation
To install the THAR-GM6 Immobilizer Bypass, follow the steps below:
- Consult the vehicle compatibility list to ensure your vehicle is supported.
- Use the provided T-Harness for easy installation.
- Make necessary connections following the color-coding provided in the manual.
- Program the bypass options as required using the Flash Link Updater or Flash Link Mobile tool (sold separately).
- Ensure mandatory installations like the hood pin are correctly set up for remote starting.
Warranty and Security
Ensure that the installation is done by a qualified technician to avoid any
damages to the vehicle. Incorrect connections can lead to permanent damage.
Remote Start Programming
To program the remote starter option for OEM Remote Stand Alone:
- Enable the feature to press 3x Lock to remote start with the OEM remote.
- Make the necessary connections under the driver dash as instructed in the manual.
Additional Information
Cut loop for automatic transmission mode and make sure all connections are
secure and correctly placed as per the manual instructions.
FAQs
-
Q: What should I do if my vehicle is not listed in the compatibility list?
A: If your vehicle is not listed, it means the THAR-GM6 Immobilizer Bypass is not compatible with your model. Do not attempt installation on incompatible vehicles. -
Q: Can I install the THAR-GM6 Immobilizer Bypass myself
-
A: It is recommended to have a qualified technician install the bypass to prevent any damage to your vehicle due to incorrect installations.
Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce dia- gramme (fonctionnelles si équipé)
VEHICLE VEHICULES
| PUSH START| YEARS ANNÉES| Immobilizer bypass|
Lock
| Unlock| Arm| Disarm| Trunk (open)| RAP Disable| Tachometer| Door Status|
Trunk Status| Hood Status*| Hand-Brake Status| Foot-Brake Status| Push-to-
Start Control| OEM Remote monitoring
CADILLAC| | | | | | | | | | | | | | | | |
ATS| Push-to-start| 2013-2019| •| •| •| •| •| •|
•| •| •| •| •| •| •| •| •
CTS| Push-to-start| 2014-2019| •| •| •| •| •| •|
•| •| •| •| •| •| •| •| •
CTS-V| Push-to-start| 2013-2016| •| •| •| •| •|
•| •| •| •| •| •| •| •| •| •
Escalade| Push-to-start| 2015-2019| •| •| •| •| •| |
•| •| •| •| •| | •| •| •
CHEVROLET| | | | | | | | | | | | | | | | |
Tahoe| Push-to-start| 2015-2020| •| •| •| •| •| |
•| •| •| •| •| | •| •| •
Suburban| Push-to-start| 2015-2020| •| •| •| •| •| |
•| •| •| •| •| | •| •| •
GMC| | | | | | | | | | | | | | | | |
Yukon| Push-to-start| 2015-2020| •| •| •| •| •| |
•| •| •| •| •| | •| •| •
XL| Push-to-start| 2015| •| •| •| •| •| | •|
•| •| •| •| | •| •| •
BYPASS FIRMWARE VERSION
70.[45] MINIMUM
- To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
| Program bypass option:| UNIT OPTION OPTION UNITE| DESCRIPTION
---|---|---|---
C1| OEM Remote status (Lock/Unlock) monitoring
Parts required (Not included): 1X THAR-GM6
MANDATORY INSTALL
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED) A11
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET
FUNCTION A11 TO OFF.
SECURITY STICKER
Notice: the installation of safety elements are mandatory. The hood pin and
the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
This guide may change without notice. See www.fortin.ca for latest version.
DESCRIPTION
Program remote starter option for R.S. OEM REMOTE STAND ALONE:
38| 2| Enable
Press 3x Lock to remote start with the OEM remote.
---|---|---
AUTOMATIC TRANSMISSION WIRING CONNECTION
MANUAL TRANSMISSION WIRING CONNECTION
KEY BYPASS PROGRAMMING PROCEDURE 1/2
- Remove the battery from the OEM remote. Place the OEM remote in the back cup holder in the center console. Refer to vehicule user guide for keyport location.
- Remove the battery from the OEM remote.
- Place the transmitter in the transmitter pocket, which is inside the centre console storage area. Refer to vehicule user guide for keyport location.
-
Press and hold
Insert the programming button: the 6-Pin Main connector -
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
-
Release the programming button when the LED is YELLOW.
If the LED is not solid YELLOW disconnect the 6-Pin connector (Main-Harness) and go back to step 1. -
Insert the required remaining connectors.
-
Press and release the programming button five (5x) times.
-
The YELLOW LED will flash 5 times each second.
-
WAIT for the YELLOW LED to turn ON solide.
-
Open the driver door.
-
Press the foot-brake pedal.
-
Press the Push-to-Start button until the engine start.
-
Release the foot-brake pedal.
-
The RED LED will turn ON. The YELLOW LED will turn OFF.
-
Press the Push-to-Start button until the engine turn OFF.
-
Close and open the driver door.
-
Press the foot-brake pedal.
-
Press the Push-to-Start button until the engine start.
-
Release the foot-brake pedal.
- The BLUE LED will turn ON.
- The BLUE LED will turn OFF. The RED LED will turn OFF.
- The YELLOW LED will flash rapidly
- The BLUE LED will turn ON.
- The BLUE LED will flash rapidly
-
Press the Push-to-Start button until the engine turn OFF.
-
The BLUE LED will flash slowly
-
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
-
4-pins (Data-Link).
-
Use the tool :
FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu. -
Microsoft Windows Computer with Internet connection
Parts required (not included) -
AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (Main-Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.
-
REMOTE STARTER / ALARM VERIFICATION
-
PROCEDURE
Test the remote starter. Remote start the vehicle. .
REMOTE STARTER PROGRAMMING
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING
REMOTE STARTER FUNCTIONALITY
- All doors must be closed.
- Remote start the vehicle.
- Unlock the doors with either:
- The OEM remote
- The remote-starter remote
- Or the proximity remote
- Enter the vehicle with the Intelligent Key.
- The vehicle can now be put in to gear and driven.
If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
Module label
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
www.fortinbypass.com
WEB UPDATE
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE