PROLED L6OP7xTx OPAL Tri and Quintopus Tube Installation Guide

: September 17, 2024
: PROLED

Table of Contents

PROLED L6OP7xTx OPAL Tri and Quintopus Tube
Specifications
Product Usage Instructions
FAQ
Characteristics
Safety indices
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROLED L6OP7xTx OPAL Tri and Quintopus Tube

Specifications

Brand: MBN GmbH
Model: LED Driver
Input Voltage: 220-240VAC
Manufacturer Address: Balthasar-Schaller-Str. 3, 86316 Friedberg, Germany
Website: www.proled.com

Product Usage Instructions

Safety Information:

For indoor use only. Please follow safety guidelines to prevent damage or injury.

Installation:

Switch off the electricity at the mains before starting the installation.
If available, remove the appropriate circuit fuse to prevent accidental power supply.
Connect the light to a power supply or a dimmer.
Connect the primary side of the driver to the power supply (230VAC).
Ensure all connections are secure and there are no loose strands.
Adhere to fire regulations when installing the lights.
If unsure about the instructions, consult a qualified electrician.

Sequence for LED Installation:

Install the LED driver (driver not included).
Then install the LED driver (driver not included) with an input of 220-240VAC.

FAQ

Q: Can this product be used outdoors?
- A: No, this product is designed for indoor use only.
Q: What should I do if the cable is damaged?
- A: Do not use the luminaire if the cable is defective. Contact a qualified electrician for repair or replacement.

Characteristics

OPAL Shape 2G Super Warm White, Warm White, Neutral White or RGB
Power consumption 15 – 18,5 W/m
Max. Light hose length 2 m each (MONO)
Metall housing round
Mounting ring colour White, Black or Gold
Power supply 24 VDC
Dimmable with a complying PWM dimmer and controller
Operating temperature range -10° C till +45° C
CE compliant with applicable European directives

Warning

For indoor use only
Please ensure that the packaging is disposed of in a safe environment
If cable is defected, do not use luminaire
We do recommend that a qualified electrician should be used to install the products
Do not look at the lighted lamp directly

Safety indices

Be sure to have a qualified electrician complete the installation. The customer is not entitled to claim for any lights installed without observing European safety directives. The manufacturer is then discharged from liability when damage is caused by improper use or installation. If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer. Do not cover lamps with heatinsulating materials. For indoor use only. Protection class IP20.

Installation

Please follow the sequence of installation step by step. Non-observance can lead to damage of LED.

Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
Connect the light to a power supply (secondary side) or a dimmer
Connect primary side of driver to power supply (230VAC)
Make sure all connections are tight with no loose strands
Ensure fire regulations are not breached when fitting your lights
If you are in any doubt regarding these instructions, consult a qualified electrician

Please follow the sequence, if not destroying of LED:

Remark to the energy efficiency class of the light source:

This product contains a light source of energy efficiency class F:

Attention:

This product counts as a containing product“ according to directive (EU) 2019/2020 and (EU) 2019/2015. The light source is part of the containing product. A separation of the light source and the containing product using commonly available tools is possible with this product. Replacement of the light source using commonly available tools is possible with this product.

The light source can be separated for testing purposes.