KSIX BTW03X Vision Wireless Earphones User Manual

KSIX BTW03X Vision Wireless Earphones

FAQs

Q: How do I know if the earphones are fully charged?

A: When there is no LED flashing, it means that the earphones are either off or fully charged.

Technical specifications

• Earphones playtime: 6 hours
• Case playtime: 20 hours
• Earphone battery: 40 mAh
• Case battery: 400 mAh
• Audio frequency range: 20 Hz – 20 kHz
• Protection rating: IPX3 (sweatproof)
• Operation range: 10 meters
• Wireless frequency range: 2.402-2.480 GHz
• Maximum transmitted power in frequency ranges: 9 dBm
• Noise cancelling: ANC and ENC
• Sensitivity: 110 ± 3 dB
• Impedance: 32 Ω±15%
• Earphone charging time: 1 hour
• Case charging time: 2 hours
• Case dimensions: 6 x 5.1 x 2.7 cm
• Earphones weight: 7.8 g (both)
• Case weight: 43.8 g
• Material: ABS
• Display: 2.01’’ TFT multi-touch
• 1Earpads: S, M, L

In the box

• 1 x Pair of earphones
• 1 x Charging case
• 1 x USB-A to USB-C cable (30 cm)
• 1 x User manual

Diagram

1. Air-outlet hole
2. LED indicator
3. Tapping area
4. Microphone
5. Turn on button
6. USB-C charging port

Earphones LED indicators

The earphones’ LED indicator informs about the connection and battery state:

• Blue LED flashing:  When the blue LED is flashing it means that the earphones are on.
• White LED flashing: white LED When the is flashing every 5 seconds it means that the connection is successful, the music is paused, and there is an incoming call or low battery.
• No LED flashing: When there is no LED flashing it means that the earphones are off or fully charged.

Initial setup

When you turn on the earphones for the first time, you will see an intro animation on the screen and hear music. Press the button to activate the earphones for the first time. After Hello plays, choose the language and dial of your choice.

Earphones usage method

• ON/OFF To turn them on or off, long-tap the earphones button for 3 seconds.
• Play/Pause Press the button of any earphone once
• Volume -/+ To decrease the volume, tap the left earpiece button 3 times. To increase the volume, tap the button on the right earpiece 3 times.
• Previous/Next song To play the previous song,  double-tap the button on the left earphone. To play the next song, double-tap the button on the right earphone.
• Answer/Hang up calls To answer or hang up a call, press the button of any earphone once. Reject calls To reject an incoming call, long-press the button on any earphone
• ANC noise To enter the ANC noise reduction
• reduction mode, long-tap the button on the left earphone
• Voice assistant To activate voice assistants, long-press the button on the right earphone
• Unlock the To unlock the case display, swipe
• screen to the right on the screen.
• Turn on the If the earphones are on, but the
• screen display is not, press the power button on the right-hand side.

Turn on/off the earphones

• To turn the earphones on, open the charging case, then the earphones will turn on and pair with each other automatically. To turn them off automatically, place the earphones into the charging case and close the case, the earphones will be powered off automatically and start to charge automatically. To turn them on manually, tap the button on both earphones for 3 seconds, you will then hear the word “Poweron”. To turn them off manually, long-press the buttons of both earphones.

3.2 How to pair the earphones

• Take the earphones out of the charging case to activate the pairing mode automatically.  Activate the BT on your device, search for “KSIX VISION” on the available BT devices list, and select it. Once the connection has been successful, you will hear the word“Connected”. Once the earphones have been connected to a device, they will pair with it automatically when taken out of the charging case.

3.3 How to reset the earphones

• To reset the earphones, you can do it from the Settings menu.

Charging the earphones

• To charge the earphones, place them into the charging case and close the case. To charge the charging case, connect the USB-C end of the cable included in the package to the charging case, and the USB-A end of the cable to a wall charger, power bank, or computer output. It takes about 2 hours to charge the charging case and about 1.5 hours to charge the earphones

Troubleshooting

If the earphones do not turn on automatically, it should be due to a low battery. Please, charge the earphones. If they do not pair with your device properly, reset the earphones from the Settings menu.

Troubleshooting 2 :

If you are having issues hearing or speaking during a call, it could be because you do not have your earphones enabled for either of these 2 features. Open the list of devices paired to your phone, select the Settings option for the earphones, and make sure you have the permissions enabled.

Display features

Dial setting

From the dial interface, tap and hold for 3 seconds to enter the dial selection mode. Tap the left and right buttons to select the dial of your choice. Tap on the image to select it.

Music Control

You can control the music from the display on the case. To access this mode, swipe to the right until the “Music” feature

Equalizer

The Vision wireless earphones allow you to choose between 7 different equalizers. On the top right, you will find the button. By pressing it, you can choose the one you prefer. Each one has predefined sound effects. The modes are POP, ROCK, CLASS, JAZZ, VOICE, DJ and DISCO.

ANC noise reduction function

To activate the ANC sound reduction mode, the earphonesmust be on in order to correctly process the environmental sound. From this feature, you can also activate the Transparency mode.

Space audio function

This feature allows you to choose between 3 different modes: Game mode, music mode, or movie mode.

Control interface style selection

Go to the Style section of the main menu to choose how you want to display the menu. You have 3 different modes.

Search earphones

If you lose an earpiece, you can enter Search mode and choose which earpiece you want to beep to find it. Note: It is important that you do not have the earpiece in your ear while the beep is playing to avoid possible damage to your hearing.

Call interface feature

When the earphones are connected to the phone and you receive an incoming call, it will appear on the display of the case. You can answer, hang up, or reject the call.

Safety, maintenance, and usage

recommendations

Read all documentation and instructions provided before using the product. Use only accessories compatible with the product. Clean the product regularly with a dry cloth. The product must be unplugged or switched off when cleaning. Keep the product’s ports and connectors clean from dust, dirt, etc., to ensure proper connection. Avoid breaking the product. Do not apply excessive pressure to any part of the product. If the product has a cable, do not bend it, and do not pull it with excessive force to avoid damaging it. Do not expose the product to a higher level of humidity than it was designed for. If the product is resistant to liquids, after immersion or use in liquids, rinse the product with fresh water and dry it. Always keep the product in a dry place away from moisture. Always keep the product away from flammable materials and do not expose it to fire, heatsources, or extreme temperatures. When the product is not in use, unplug it and store it in a clean, dry place away from moisture and dirt. If water enters the product, immediately disconnect it from any power source or device to which it is connected. Do not use the product for any purpose other than that for which it was designed. Do not use the product if you notice any visible defects. Do not open or disassembl the product or attempt to repair it yourself. These actions invalidate the warranty. Keep the product out of the reach of children. Recycle the product in accordance with local environmental rules and regulations. If the product includes a battery, maintain the state of charge between 20% and 80% of its capacity to preserve the battery life.

Legal Note

Atlantis Internacional, S.L, declares that this product is in incompliance with the essential requirements and any other applicable or enforceable provisions of Directive 2014/53/EC  The functions and characteristics described in this manual are based on tests carried out by Atlantis Internacional S.L. The user is responsible for examining and verifying the product when purchasing it. Atlantis Internacional S.L. declines all responsibility for any personal, material, or economic damage, as well as any damage to your device, due to misuse, abuse, or improper installation of the product.

Disposal of electrical and electronic equipment

The CE symbol indicates that electrical and electronic equipment must be disposed of separately. This product is designed to be disposed of separately at an appropriate waste collection point. Do not dispose of it with household waste. If the equipment is battery-operated, the batteries must be removed and disposed of at a separate collection point for this type of waste. If the batteries are not removable, do not attempt to remove them, as this must be done by a qualified professional. Separate disposal and recycling help to conserve natural resources and prevent harmful consequences to human health and the environment that could arise from improper disposal. The final price of this product includes the cost of the environmental management necessary for the correct treatment of the waste generated. For more information, please contact the seller or your local waste management authority.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>